Cisco Nexus 9300 Series Switch Instruction Manual

1. Úvod

This manual provides essential instructions for the safe and efficient operation of your Cisco Nexus 9300 Series Switch, model N9K-C93180YC-FX. It covers installation, basic operation, maintenance, and troubleshooting. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste předešli zranění a poškození zařízení:

• Always disconnect power before performing any service or maintenance on the switch.
• Ensure the switch is properly grounded to prevent electrical shock.
• Do not operate the switch in environments that exceed the specified temperature limits (maximum 40°C).
• Keep the switch away from moisture and excessive humidity.
• Only qualified personnel should install and service this equipment.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• Cisco Nexus 9300 Series Switch (Model: N9K-C93180YC-FX)
• Napájecí kabel(y)
• Sada pro montáž do racku (pokud je k dispozici)
• Dokumentace (Stručný průvodce, Bezpečnostní informace)

Pokud některé položky chybí nebo jsou poškozené, ihned kontaktujte svého dodavatele.

4. Konec produktuview

The Cisco Nexus 9300 Series Switch, model N9K-C93180YC-FX, is a high-performance network switch designed for data center environments. It features a modular design and supports various high-speed connectivity options.

4.1 Klíčové vlastnosti

• Modulární design: Allows for flexible configuration and expansion.
• High-Density Ports: Equipped with 48 SFP ports supporting 1 Gigabit, 10 Gigabit, and 25 Gigabit Ethernet.
• High-Speed Uplinks: Includes 6 QSFP28 ports for 40 Gigabit and 100 Gigabit Ethernet connectivity.
• Optical Fiber Support: Designed for optical fiber media types.
• Vysoká rychlost přenosu dat: Capable of up to 3600 Gigabits Per Second.

4.2 Rozložení předního panelu

The front panel of the switch provides access to all network ports and status indicators.

Obrázek 1: Přední view of the Cisco Nexus 9300 Series Switch N9K-C93180YC-FX. This image displays the front panel, featuring 48 SFP ports arranged in rows, and 6 QSFP28 ports located on the right side, designed for high-speed optical fiber connections.

The 48 SFP ports (1/10G/25G) are typically used for connecting servers and other network devices, while the 6 QSFP28 ports (40G/100G) serve as high-bandwidth uplinks to other switches or core network infrastructure.

5. Nastavení

5.1 Instalace do stojanu

The Cisco Nexus 9300 Series Switch is designed for standard 19-inch rack mounting. Use the provided rack mount kit to securely install the switch into a server rack. Ensure adequate airflow around the unit for proper cooling.

5.2 Připojení napájení

1. Ujistěte se, že zdroj napájení odpovídá hlasitosti přepínače.tagpožadavky na e (240 voltů).
2. Connect the power cord(s) to the power input receptacle(s) on the rear of the switch.
3. Plug the other end of the power cord(s) into a grounded electrical outlet.
4. Verify that the power LED on the front panel illuminates, indicating power is supplied.

5.3 Síťová připojení

Connect optical fiber cables to the SFP and QSFP28 ports as required by your network topology. Ensure that compatible transceivers are used for each port type and speed.

• For 1/10G/25G connections, use appropriate SFP/SFP+/SFP28 transceivers and optical fiber cables.
• For 40G/100G connections, use appropriate QSFP+/QSFP28 transceivers and optical fiber cables.

5.4 Počáteční konfigurace

For initial configuration and management access, connect a console cable from a management workstation to the console port on the switch. Refer to the Cisco Nexus 9000 Series documentation for detailed command-line interface (CLI) configuration instructions.

6. Ovládání přepínače

6.1 Zapnutí/vypnutí

• Zapnutí: Once connected to a power source, the switch will typically power on automatically. Observe the system status LEDs.
• Vypnout: To power off, gracefully shut down the operating system (if applicable) and then disconnect the power cord(s).

6.2 Stavové indikátory

The front panel features various LED indicators to provide visual status of the switch's operation:

• Systémová LED: Indikuje celkový stav systému (např. zelená pro normální stav, oranžová pro varování, červená pro kritický stav).
• LED diody napájení: Indicate the status of installed power supplies.
• Fan Module LEDs: Indicate the status of fan modules.
• LED diody portů: Each network port has an LED to indicate link status and activity (e.g., solid green for link, blinking for activity, off for no link).

Consult the official Cisco documentation for a detailed explanation of each LED's behavior.

7. Údržba

7.1 Čištění

Regularly clean the exterior of the switch and ensure ventilation openings are free from dust and debris. Use a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the unit.

7.2 aktualizací firmwaru

Pravidelně kontrolujte podporu Cisco website for available firmware updates. Keeping the switch's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided by Cisco for the update process.

8. Řešení problémů

This section provides basic troubleshooting steps for common issues. For more complex problems, refer to Cisco's official documentation or contact technical support.

8.1 Bez napájení

• Verify that the power cord(s) are securely connected to both the switch and the power outlet.
• Zkontrolujte funkčnost zásuvky pomocí jiného zařízení.
• Inspect the power supply unit(s) for any visible damage.

8.2 Problémy s propojením portů

• Ensure the optical fiber cables are correctly connected and not damaged.
• Verify that the transceivers (SFP, QSFP28) are properly seated and compatible with both the switch and the connected device.
• Check the configuration of the port on both the switch and the connected device.
• Test with a known good cable and transceiver.

8.3 System Error Indicators

If the System LED indicates an error (e.g., amber or red), consult the Cisco Nexus 9000 Series documentation for specific error codes and recommended actions. This usually points to hardware failures or critical system issues.

9. Specifikace

10. Záruka a podpora

This Cisco Nexus 9300 Series Switch is offered as an Amazon Renewed product. As such, it has been professionally inspected and tested to function and appear like new. It is backed by the Amazon Renewed Guarantee, which provides eligibility for replacement or refund if you are not satisfied with your purchase.

For detailed technical support, software downloads, and comprehensive documentation, please refer to the official Cisco Systems website. For inquiries related to your Amazon Renewed purchase, please contact Amazon customer service or your reseller.