Uživatelská příručka k vícerozměrnému delay pedálu Strymon TimeLine
Model: TML
Your guide to unlocking the full potential of your Strymon TimeLine.
1. Úvod
The Strymon TimeLine is a powerful and versatile multidimensional delay pedal designed to provide an extensive range of studio-quality delay effects. Featuring 12 distinct delay algorithms, a comprehensive 30-second stereo looper, and full MIDI implementation, the TimeLine offers unparalleled creative possibilities for guitarists and musicians.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your TimeLine pedal, ensuring you get the most out of its advanced features.
2. Začínáme: Nastavení
2.1. Co je v krabici
- Strymon TimeLine Multidimensional Delay Pedal
- 9voltový napájecí zdroj
2.2. Připojení napájení
Connect the included 9-volt DC power supply to the 9V DC input jack on the rear panel of the TimeLine pedal. Ensure the power supply is rated for 9V DC with a center-negative polarity and sufficient current (minimum 300mA recommended).
2.3. Audio připojení
The TimeLine supports both mono and stereo operation. Use standard 1/4-inch instrument cables for all audio connections.
- Monofonní nastavení: Connect your instrument or preceding pedal to the VLEVO DOVNITŘ konektor. Připojte VYNECHANO jack do vašeho ampplnicí pedál nebo další pedál.
- Stereo nastavení: Connect your stereo signal source to both VLEVO DOVNITŘ a PŘÍMO VNITŘ konektory. Připojte VYNECHANO a PRÁVĚ VEN konektory k vašemu stereo ampzařízení na zhášení žáruvzdornosti nebo mixér.
- Smyčka efektů: The NÁVRAT a POSLAT jacks can be used for an external effects loop, allowing you to insert other pedals into the TimeLine's signal path.
Figure 2.3.1: Rear panel connections including Left/Right In/Out, Expression, MIDI, and Power.
2.4. MIDI připojení
The TimeLine features MIDI IN a MIDI OUT ports for advanced control and synchronization. Use standard 5-pin DIN MIDI cables to connect to MIDI controllers, interfaces, or other MIDI-enabled devices.
- MIDI IN: Receives MIDI messages for parameter control, preset changes, and tempo synchronization.
- MIDI OUT: Transmits MIDI messages, including MIDI clock and parameter changes.
Figure 2.4.1: MIDI In and Out ports with connected cables.
2.5. Expression Pedal Input
Connect an expression pedal to the EXP jack using a TRS (stereo) cable. This allows real-time control over various parameters, such as delay time, mix, or feedback, for dynamic performance.
Figure 2.5.1: Expression pedal connected to the TimeLine.
3. Provoz
3.1. Ovládací prvky Overview
The TimeLine features a comprehensive set of knobs and footswitches for intuitive control over its delay parameters and looper functions.
Figure 3.1.1: Front panel controls of the Strymon TimeLine.
- VALUE (push param): Adjusts the currently selected parameter. Push to cycle through parameters.
- ČAS: Řídí dobu zpoždění.
- OPAKOVÁNÍ: Adjusts the number of delay repeats (feedback).
- SMĚS: Controls the blend between dry and wet signals.
- FILTR: Adjusts the tone of the delay repeats.
- ŠTĚRK: Adds character and saturation to the delay repeats.
- SPEED / MOD / DEPTH: Controls modulation parameters depending on the delay type.
- Knoflík TYPE: Selects one of the 12 delay algorithms.
- REC/DUB Footswitch (A): Records or overdubs loops.
- PLAY Footswitch (B): Plays or stops loops.
- Nožní spínač TAP: Taps in tempo or stops looper (hold).
3.2. Delay Algorithms
The TimeLine offers 12 unique delay machines, each with its own distinct character and adjustable parameters:
- Digitální: Crystal-clear digital delay.
- Dvojí: Two independent delay lines, configurable in series or parallel.
- Vzor: Multi-tap patterns for rhythmic delays.
- Zvrátit: Delays played backward.
- Led: Slices and dices input with selectable interval shift.
- Kachna: Delay level ducks when playing, swells when silent.
- dBucket: Analog bucket-brigade style delay recreation.
- dPáska: Emulates classic tape echo machines.
- Lo-Fi: Adds bit depth and sample rate reduction for vintage zní.
- Swell: Variable swell time with the delay.
- Trem: Synchronized tremolo with waveshape, depth, and speed.
- Filtr: Synchronized filter placed before or after the delay.
Obrázek 3.2.1: Přesview of the 12 unique delay algorithms.
3.3. Funkce looperu
The TimeLine includes a powerful 30-second stereo looper. It can be routed pre- or post-delay, allowing for creative layering and sound design.
- Záznam: Stiskněte REC/DUB (A) pro zahájení nahrávání.
- Overdubbing: Během přehrávání stiskněte REC/DUB (A) again to overdub.
- Přehrávání: Stiskněte PLAY (B) pro spuštění nebo zastavení přehrávání.
- Stop: Držet TAP footswitch to stop the looper.
- Zpět/Znovu: Advanced looper functions are accessible via MultiSwitch or MIDI.
Figure 3.3.1: Built-in looper capabilities.
3.4. Ukládání a vyvolávání předvoleb
The TimeLine allows you to save and recall your custom delay settings. The pedal has 200 preset locations, organized into 100 banks (A and B per bank).
- Ukládání: To save a preset, hold the TYP knob until the display indicates "SAVE". Use the HODNOTA knob to select a preset location, then press HODNOTA potvrdit.
- Připomínáme: Použijte BANKOVNÍ DOLŮ a BANK UP footswitches (A and B when not in looper mode) to navigate through banks. Press the corresponding footswitch (A or B) to load the desired preset.
4. Údržba
Proper maintenance ensures the longevity and optimal performance of your Strymon TimeLine pedal.
- Čištění: K čištění vnější strany pedálu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která mohou poškodit povrchovou úpravu.
- Skladování: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
- Aktualizace firmwaru: Periodically check the official Strymon website for any available firmware updates. Updates can introduce new features, improvements, or bug fixes. Follow the instructions provided by Strymon for any update procedures.
5. Řešení problémů
If you encounter issues with your TimeLine pedal, refer to the following common troubleshooting steps:
| Problém | Možná příčina / řešení |
|---|---|
| No power / Pedal not turning on |
|
| No sound / Dry signal only |
|
| Unexpected behavior / Glitches |
|
| Looper nenahrává/nepřehrává |
|
For more detailed troubleshooting or issues not covered here, please visit the official Strymon support webnebo kontaktujte jejich zákaznický servis.
6. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | TML |
| Hmotnost položky | 2.03 libry (921 gramů) |
| Rozměry produktu | 10.24 x 5.91 x 3.54 palce |
| Zdroj napájení | Elektrický kabel |
| svtage | 9 voltů stejnosměrného proudu (střed-záporný) |
| Typ konektoru | 1/4-inch audio jack, 5-pin DIN MIDI |
| Hardwarové rozhraní | 1/4-inch Audio, MIDI |
| Formát signálu | Analog (input/output), Digital (internal processing) |
| Typy zpoždění | 12 (Digital, Dual, Pattern, Reverse, Ice, Duck, dBucket, dTape, Lo-Fi, Swell, Trem, Filter) |
| Looper Length | 30 seconds (stereo) |
| Předvolby | 200 (100 banks x 2 presets) |
7. Záruka a podpora
Strymon products are built with high-quality components and undergo rigorous testing. For information regarding the warranty period and terms for your TimeLine pedal, please refer to the warranty card included with your product or visit the official Strymon webmísto.
For technical support, product registration, or to access additional resources such as FAQs and firmware downloads, please visit the official Strymon support page or their Amazon Brand Store:
