1. Úvod
Thank you for choosing the X-PRO 150cc Moped Motorcycle S150. This vehicle is designed for adult use and offers reliable transportation with its 150cc 4-stroke engine and automatic transmission. Please read this manual thoroughly before operating the moped to ensure your safety and the longevity of the vehicle.
Important Note: This 150cc scooter cannot be shipped to Pennsylvania or New York. Additionally, the Manufacturer Statement of Origin (MSO) and Bill of Sale paperwork will be sent to you by separate mail.
Figure 1.1: The X-PRO 150cc Moped Motorcycle S150 in Red. This image shows the overall design of the moped, highlighting its red and silver body, black seat, and storage box at the rear.
2. Nastavení a montáž
Your X-PRO 150cc Moped Motorcycle S150 requires some assembly upon arrival. Please ensure you have all necessary tools and a clear, safe workspace before beginning. It is recommended to have assistance for certain steps.
2.1. Vybalení a kontrola
Carefully remove the moped from its packaging. Inspect all components for any signs of shipping damage. Report any damage to the seller immediately.
2.2. Montážní kroky
Assembly typically includes the following components. Specific instructions and torque specifications will be provided in the detailed assembly guide included with your moped.
- Řídítka: Securely attach and align the handlebar.
- kola: Install the front wheel and ensure proper alignment and brake function.
- brzdy: Connect and adjust the brake system for both front and rear wheels.
- Hub Odometer Counter: Connect the odometer cable to ensure accurate mileage tracking.
- Trunk (if included): Attach the rear storage trunk.
- Baterie: Install and connect the free-maintenance battery. Ensure proper polarity.
Note: Assembly requirements may differ slightly per model. Refer to the specific assembly instructions provided with your product for detailed steps.
Obrázek 2.1: Strana view of the moped, illustrating the overall structure and components that may require assembly.
3. Návod k obsluze
The X-PRO 150cc Moped Motorcycle S150 features a fully automatic transmission, making operation straightforward. Always wear appropriate safety gear, including a helmet, and adhere to all local traffic laws.
3.1. Kontroly před jízdou
- Hladina paliva: Ensure sufficient fuel for your ride.
- pneumatiky: Check tire pressure and condition. The 12-inch DOT approved tires offer great traction.
- brzdy: Zkontrolujte správnou funkci přední a zadní brzdy.
- Světla: Verify headlights, tail lights, and turn signals are working.
- Roh: Vyzkoušejte klakson.
3.2. Spuštění motoru
- Vložte klíč do zapalování a otočte jím do polohy „ON“.
- Ujistěte se, že je stojan nahoře.
- Apply the brake lever (either front or rear).
- Press the electric starter button. If the electric starter does not work, use the kick starter.
- Allow the engine to warm up for a short period, especially in colder weather.
3.3. Riding the Moped
With the automatic transmission, simply twist the throttle to accelerate. To slow down, release the throttle and apply the brakes smoothly. The moped has a top speed of 55+ Mph.
Obrázek 3.1: Přední strana view of the moped, showing the headlight and front wheel, crucial for safe operation.
4. Údržba
Regular maintenance is crucial for the performance, safety, and longevity of your X-PRO 150cc Moped. Follow the recommended service schedule in your detailed owner's manual.
4.1. Engine Oil Change
It is highly recommended to change the engine oil as specified in your owner's manual, especially after the initial break-in period. This is a critical step to prevent damage to the 150cc 4-stroke engine.
4.2. Péče o pneumatiky
Regularly check the pressure of both front and rear 120/70-12 tires. Maintain proper inflation as specified to ensure optimal handling and tire life. Inspect tires for wear and damage.
4.3. Brzdový systém
Periodically inspect the hydraulic ABS disc brake (front) and mechanical drum brake (rear) for wear on pads/shoes and proper fluid levels (for disc brake). Ensure brake levers operate smoothly.
4.4. Údržba baterie
The moped is equipped with a free-maintenance battery. While it requires less upkeep, ensure terminals are clean and connections are secure. If the moped is stored for extended periods, consider using a trickle charger.
4.5. Obecné kontroly
- Inspect all lights (headlights, tail lights, turn signals) for proper function.
- Zkontrolujte houkačku.
- Ujistěte se, že všechny upevňovací prvky jsou pevné a bezpečné.
- Clean the moped regularly to prevent corrosion and maintain appearance.
Obrázek 4.1: Zadní view of the moped, showing the tail lights, turn signals, and exhaust system, all critical for safety and performance.
5. Řešení problémů
This section addresses common issues you might encounter with your X-PRO 150cc Moped. For more complex problems, consult a qualified technician or contact customer support.
5.1. Moped Does Not Start
- Baterie: Check if the battery is charged and properly connected. A dead or weak battery is a common cause.
- Palivo: Ujistěte se, že je v nádrži dostatek paliva.
- Zabiják: Verify the engine kill switch is in the "RUN" position.
- Stojan: Ujistěte se, že je stojánek zcela zasunutý.
- Zapalovací svíčka: Zkontrolujte zapalovací svíčku, zda není znečištěná nebo poškozená.
5.2. Lights Not Functioning
- Žárovka: Check if the bulb is burnt out and needs replacement.
- Zapojení: Inspect wiring connections for looseness or corrosion.
- pojistka: Check the fuse box for any blown fuses.
5.3. Inaccurate Mileage Counter
- Kabelové připojení: Ensure the odometer cable is securely connected at both the wheel and the instrument cluster.
- Poškození kabelu: Check the cable for any kinks or damage that might impede its function.
Obrázek 5.1: Podrobný view of the moped's engine area, which is relevant for troubleshooting starting issues and performing maintenance.
6. Specifikace
Below are the detailed specifications for the X-PRO 150cc Moped Motorcycle S150.
| Kategorie | Specifikace |
|---|---|
| Motor | 150cc, 4-Stroke, GY6 engine |
| Koňská síla | 10 hp |
| Chladicí systém | Chlazení nuceným vzduchem |
| Přenos | Automatic (CVT) |
| Startér | Electric/Kick |
| Nejvyšší rychlost | 55+ Mph |
| Zapalování | CDI |
| Přední odpružení | Twin Inverted Hydraulic Forks |
| Zadní odpružení | Dual Rear Hydraulic Spring |
| Přední brzda | Hydraulic ABS Disc Brake |
| Zadní brzda | Mechanical Drum Brake |
| Přední pneumatika | 120/70-12 |
| Zadní pneumatika | 120/70-12 |
| Hmotnostní kapacita | 350 liber |
| Hrubá hmotnost | 300 liber |
| Celková délka | 73 palců |
| Celková šířka | 26 palců |
| Celková výška | 44 palců |
| Rozvor kol | 52.8 palců |
| Roh | Ano |
| Světlomety | Ano |
| Zadní světla | Ano |
| Ukazatele směrových světel | Ano |
| Schváleno EPA | Ano |
| D.O.T Approved | Ano |
| Sada nářadí | Ano |
| Barva | Červený |
| Věkové rozmezí | Dospělý |
| Speciální funkce | Seat, Lights, Upgraded GY6 engine and CVT transmission |
| Počet kol | 2 |
| Materiál kola | Kov |
| Materiál rámu | Kov |
| Hmotnost položky | 350 libry |
| Typ řídítek | Nastavitelný |
| Velikost kola | 12 palce |
| Typ kola | Solidní |
| Typ záruky | Omezený |
| Doporučená použití | Dojíždění |
| Výrobce | X Pro |
| UPC | 731628684722 |
| Rozměry produktu | 73 x 26 x 44 palce |
| Číslo modelu položky | PILOT 150 |
| Číslo dílu výrobce | MC-T33 |
7. Záruka a podpora
X-PRO is committed to providing quality products and support. Your moped comes with a limited warranty. Please refer to the warranty documentation included with your purchase for full details.
7.1. Plány ochrany
Consider enhancing your coverage with available protection plans:
- Dvouletý ochranný plán: Offers extended coverage for your product.
- Kompletní ochrana: A comprehensive plan that can cover eligible past and future purchases.
7.2. Zákaznická podpora
As a product from a small business brand, X-PRO values direct customer engagement. For any inquiries, technical assistance, or to purchase parts, please visit the official X-PRO Store or contact their customer support directly.
