Příručky+

WORKPRO W124003

Sada rotačních nástrojů WORKPRO W124003 Návod k obsluze

Model: W124003

1. Úvod

This manual provides essential information for the safe and effective use of your WORKPRO Rotary Tool Set W124003. This versatile tool is designed for various applications including grinding, engraving, sanding, polishing, and cutting. Please read this manual thoroughly before operation and keep it for future reference.

2. Obsah produktu

The WORKPRO Rotary Tool Set W124003 includes a comprehensive collection of accessories for various tasks. Please verify that all items listed below are present in your kit.

WORKPRO Rotary Tool Set W124003 in its clear plastic case, showing 276 pieces.

Obrázek 2.1: Přesview of the WORKPRO Rotary Tool Set W124003, showcasing the complete 276-piece kit within its transparent storage case.

  • Sanding Bands: 52 pieces
  • Sanding Discs: 40 pieces
  • Emery Cut-off Wheels: 36 pieces
  • Grinding Compound: 1 piece
  • Fiberglass Cut-off Wheels: 16 pieces
  • Flap Wheels: 4 pieces
  • Felt Polishing Wheels: 8 pieces
  • Felt Tip: 1 piece
  • Silicon Carbide Grinding Stones: 6 pieces
  • Aluminum Oxide Grinding Stones: 6 pieces
  • White Aluminum Oxide Wheels: 6 pieces
  • Diamond Wheels: 2 pieces
  • Dressing Stone: 1 piece
  • Collets: 3 pieces
  • Klíč: 1 kus
  • Rubber Emery Wheels: 2 pieces
  • Diamond Cutters: 9 pieces
  • HSS Twist Drill Bits: 9 pieces
  • Mandrel Wheels: 3 pieces
  • Sanding Shanks: 3 pieces
  • Suction Cup: 1 piece
  • Rubber Grinding Stones: 6 pieces
  • Silicon Carbide Grinding Stones: 4 pieces
WORKPRO Rotary Tool Set W124003 with the top tray lifted, revealing additional accessories in the bottom compartment.

Figure 2.2: The rotary tool set opened, displaying the organized arrangement of various accessories in both the top and bottom compartments.

Detailní záběr view of various grinding and sanding accessories from the WORKPRO Rotary Tool Set W124003.

Obrázek 2.3: Podrobný view of the grinding and sanding accessories, including various grit sizes and shapes for different applications.

Top tray of the WORKPRO Rotary Tool Set W124003, showing various bits and attachments.

Figure 2.4: The upper tray of the accessory kit, featuring an assortment of bits such as grinding stones, diamond cutters, and brushes.

3. Bezpečnostní pokyny

Always follow basic safety precautions when using this rotary tool to reduce the risk of injury or damage. Failure to do so may result in serious injury.

  • Ochrana očí: Always wear ANSI-approved safety goggles or safety glasses with side shields when operating the tool.
  • Ochrana dýchacích cest: Wear a dust mask or respirator, especially when working with materials that produce fine dust.
  • Pracovní oblast: Udržujte své pracovní místo čisté, dobře osvětlené a bez nepořádku. Zajistěte dostatečné větrání.
  • Zajištění obrobku: Obrobek vždy zajistěte pomocíampnebo svěráku. Nikdy nedržte obrobek rukou.
  • Správné oblečení: Nenoste volné oblečení, šperky ani dlouhé vlasy, které by se mohly zachytit o pohyblivé části.
  • Zdroj napájení: Ensure the power source matches the tool's requirements. Unplug the tool when not in use or when changing accessories.
  • Vyhněte se překročení: Vždy udržujte správný postoj a rovnováhu.
  • Stav nástroje: Inspect the tool and accessories for damage before each use. Do not use damaged tools or accessories.
  • Děti a přihlížející: Udržujte děti a přihlížející mimo provozní oblast.
  • Hořlavé materiály: Do not operate the tool near flammable liquids, gases, or dust.

4. Nastavení

Before operating your rotary tool, follow these steps for proper setup:

  1. Rozbalit: Opatrně vyjměte všechny součásti z obalu. Obal si uschovejte pro skladování nebo přepravu.
  2. Kontrolovat: Check the tool and all accessories for any signs of damage from shipping. Do not use if damaged.
  3. Vyberte příslušenství: Choose the appropriate accessory for your task (e.g., grinding stone, sanding band, cutting wheel).
  4. Vložte příslušenství:
    • Press and hold the shaft lock button on the rotary tool.
    • Odšroubujte matici kleštiny.
    • Vložte stopku příslušenství zcela do kleštiny.
    • Tighten the collet nut securely with the provided wrench. Do not overtighten.
    • Uvolněte tlačítko zámku hřídele.
  5. Připojení napájení: Ensure the tool's power switch is in the "OFF" position before plugging it into a suitable power outlet.

5. Návod k obsluze

Once set up, you can begin using your WORKPRO Rotary Tool. Always practice on scrap material first.

  1. Zapnutí: Plug the tool into the power outlet. Turn the power switch to the "ON" position.
  2. Nastavení rychlosti: If your model has variable speed control, adjust the speed according to the material and accessory being used. Higher speeds are generally for harder materials and smaller accessories, while lower speeds are for softer materials and larger accessories.
  3. Aplikace:
    • Grinding/Engraving: Apply light, consistent pressure. Let the tool do the work. Move the tool smoothly across the workpiece.
    • Broušení: Use appropriate grit sanding bands/discs. Move the tool in a circular or back-and-forth motion to achieve an even finish.
    • Řezání: Use cut-off wheels for cutting. Ensure the workpiece is stable. Apply gentle pressure and allow the wheel to cut through the material.
    • Leštění: Use felt wheels with polishing compound. Apply a small amount of compound to the wheel and polish the surface with light pressure.
  4. Vypnout: When finished, turn the power switch to the "OFF" position and unplug the tool from the power outlet.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho rotačního nástroje.

  • Čištění: After each use, unplug the tool and use a soft brush or compressed air to remove dust and debris from the ventilation openings and around the collet.
  • Úložiště příslušenství: Store accessories in their designated compartments within the case to prevent damage and loss.
  • Skladování nářadí: Store the rotary tool in a dry, secure location, out of reach of children.
  • Kontrola kabelu: Regularly inspect the power cord for any cuts, fraying, or damage. Do not use the tool if the cord is damaged.
  • Výměna kartáče: (If applicable for this model) Refer to a qualified service technician for carbon brush inspection and replacement if the tool experiences reduced power or intermittent operation.

7. Řešení problémů

If you encounter issues with your WORKPRO Rotary Tool, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Nástroj se nezapne.No power supply; Faulty power switch; Damaged cord.Zkontrolujte zásuvku; Ujistěte se, že je vypínač v poloze ZAPNUTO; Zkontrolujte, zda není poškozený kabel.
Příslušenství se nadměrně kymácí nebo vibruje.Accessory not properly inserted; Collet nut loose; Bent accessory shank.Re-insert accessory fully and tighten collet nut; Replace bent accessory.
Nástroj se přehřívá.Blocked ventilation; Excessive pressure during operation; Prolonged use.Clean ventilation slots; Reduce pressure; Allow tool to cool down.
Poor performance (e.g., slow grinding).Worn accessory; Incorrect speed setting; Inappropriate accessory for material.Replace worn accessory; Adjust speed; Select correct accessory for task.

8. Specifikace

Key technical specifications for the WORKPRO Rotary Tool Set W124003:

  • Značka: WORKPRO
  • Číslo modelu: W124003
  • Rozměry produktu (přibližně): Délka 240 mm x Šířka 290 mm x Tloušťka 57 mm
  • Product Weight (Approx.): 838 g
  • Total Weight (Approx.): 860 g (including packaging)
  • Zdroj napájení: Elektrický kabel
  • Množství: 1 sada

9. Záruka a podpora

According to the product information, there is no specific warranty provided for this item. For any product inquiries, technical assistance, or support, please contact the seller or WORKPRO customer service directly through their official channels.

You can visit the official WORKPRO store on Amazon for more information: WORKPRO Store