Mount-It! VESA Mount Adapter Kit User Manual

1. Úvod

Thank you for choosing the Mount-It! VESA Mount Adapter Kit. This kit is designed to extend the VESA mounting patterns of your existing TV wall mount, allowing it to accommodate larger televisions. It provides a cost-effective solution to upgrade your display without replacing your entire mounting system.

This adapter kit is compatible with most 32-inch to 55-inch televisions and converts common VESA patterns such as 200x200mm to 400x200mm or 400x400mm, and 100x100mm to 200x200mm or 300x300mm. Constructed from heavy-gauge steel, it ensures durability and reliable support for your television.

2. Bezpečnostní informace

Please read all instructions carefully before installation. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer or Mount-It! customer service.

Do not exceed the weight capacity of your existing TV mount. This adapter kit has a 66 lb (30 kg) load capacity, but the overall capacity is limited by the lowest rated component (your TV mount or the adapter kit).
Ensure the wall or mounting surface can safely support the combined weight of the mount, adapter kit, and television.
Používejte vhodné nástroje a přesně dodržujte všechny kroky instalace.
Udržujte malé části mimo dosah dětí.
Always have two people assist with lifting and positioning the television.

3. Obsah balení

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, please contact Mount-It! customer service for assistance.

Mount-It! VESA Mount Adapter Kit components including four steel VESA adapter brackets, four spacers, four M8x30 bolts, four M6x30 bolts, four flat bolts, and four nylon lock nuts.

Figure 3.1: Included Hardware and Adapter Brackets

(4) Steel VESA Adapter Brackets
(4) Distanční vložky
(4) Šrouby M8x30
(4) Šrouby M6x30
(4) Flat Bolts (for attaching to existing VESA bracket)
(4) Nylon Lock Nuts (for attaching to existing VESA bracket)

4. Nastavení a instalace

This section provides step-by-step instructions for installing the VESA adapter kit to your existing TV mount and television.

4.1 Determine VESA Pattern and Compatibility

First, identify the VESA mounting pattern on the back of your television and your existing TV mount. This kit is designed to extend smaller VESA patterns to larger ones.

Diagram showing VESA adapter arms extending a 100mm x 100mm VESA pattern to 200mm x 200mm, 200mm x 300mm, and 300mm x 300mm.

Figure 4.1: VESA Pattern Extension (100mm to 200mm/300mm)

Diagram showing VESA adapter arms extending a 200mm x 200mm VESA pattern to 300mm x 300mm, 400mm x 200mm, and 400mm x 400mm.

Figure 4.2: VESA Pattern Extension (200mm to 300mm/400mm)

4.2 Attaching Adapter Brackets to Existing Mount

Attach the four steel VESA adapter brackets to your existing TV mount's VESA plate. Use the provided flat bolts and nylon lock nuts for this connection. Ensure the adapter brackets are oriented correctly to achieve the desired VESA pattern extension.

Image showing the VESA adapter arms attached to an existing VESA head mount, extending its reach.

Figure 4.3: Adapter Brackets Attached to Existing Mount

Poznámka: If the provided flat bolts are too wide for your existing VESA bracket, use the hardware that came with your original mount.

4.3 Attaching Television to Adapter Brackets

Once the adapter brackets are securely attached to your existing mount, align your television with the new VESA pattern created by the adapter brackets. Use the provided M6x30 or M8x30 bolts and spacers to attach your television to the adapter brackets. Select the bolt size that fits your TV's mounting holes. The spacers create a small gap between the TV and the bracket for proper ventilation and fit.

Carefully align the mounting holes on the back of your TV with the holes on the adapter brackets.
Insert the appropriate bolts (M6x30 or M8x30) through the spacers and into the TV's mounting holes, securing them to the adapter brackets.
Všechny šrouby pevně utáhněte, ale nepřetahujte je.

Image illustrating how the VESA adapter kit allows a smaller VESA mount to fit a larger TV, showing a 100mm mount extending to 300mm and a 200mm mount extending to 400mm.

Figure 4.4: Adapter Kit in Use with a Larger TV

5. Návod k obsluze

The Mount-It! VESA Mount Adapter Kit is a passive component designed to extend VESA compatibility. Once installed, its operation is integrated with your existing TV wall mount. Continue to operate your TV mount as per its original instructions. Ensure that the television is securely attached to the adapter brackets and the adapter brackets are securely attached to the main mount before use.

6. Údržba

Regular maintenance ensures the longevity and safety of your VESA mount adapter kit and TV setup.

Pravidelné kontroly: Periodically check all screws and bolts to ensure they remain tight. Vibrations or movement over time can cause fasteners to loosen.
Čištění: Wipe the adapter brackets with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents.
Kontrola poškození: Inspect the adapter brackets for any signs of damage, bending, or corrosion. If any damage is observed, discontinue use and contact Mount-It! customer service.

7. Řešení problémů

Problém	Možná příčina	Řešení
Adapter brackets do not fit existing mount.	Incorrect VESA pattern on existing mount or incompatible hardware.	Verify your existing mount's VESA pattern. Use the hardware provided with your original mount if the kit's bolts are too wide.
TV mounting holes do not align with adapter.	Incorrect orientation of adapter brackets or non-standard VESA pattern on TV.	Ensure adapter brackets are oriented correctly for the desired VESA extension. Confirm your TV's VESA pattern is supported by this kit.
Bolts for TV are too long or too short.	Incorrect bolt size selected for TV.	This kit includes M6x30 and M8x30 bolts. If neither fits, you may need to source specific bolts for your TV. Ensure spacers are used.
TV feels unstable after installation.	Volné spoje nebo překročení nosnosti.	Retighten all bolts on both the adapter brackets and the TV. Ensure the combined weight of the TV and adapter does not exceed the capacity of your original mount.

8. Specifikace

Model: MI-790
Materiál: Silná ocel
Barva: Černý
Nosnost: 66 lb (30 kg) (Note: Actual load capacity is limited by the lowest rated component, typically your existing TV mount.)
Kompatibilní velikosti televizorů: Most 32 inches to 55 inches
VESA Compatibility (Converts from): 100x100mm, 200x200mm
VESA Compatibility (Converts to): 200x200mm, 300x300mm, 400x200mm, 400x400mm
Rozměry balení: 8.19 x 2.83 x 1.34 palce
Hmotnost položky: 14.4 unce

Image showing a television screen with 'WEIGHT CAPACITY 66 lbs' overlaid, indicating the maximum weight the adapter kit can support.

Figure 8.1: Weight Capacity Information

9. Záruka a podpora

Mount-It! products are backed by a limited warranty. For specific warranty details, product support, or to report missing/damaged parts, please visit the official Mount-It! webwebu nebo se přímo obraťte na jejich zákaznický servis.

Mount-It! Official Webmísto: www.mount-it.com

For the most up-to-date contact information and support resources, please refer to the Mount-It! webwebu nebo obalu vašeho produktu.

	Montážní manuál pro nástěnný držák na televizi Mount-It! MI-4112 s plným pohybem Podrobný instalační návod k montáži nástěnného držáku Mount-It! MI-4112 s plným pohybem pro televizi. Obsahuje bezpečnostní pokyny, seznam dílů, rozměry, nosnost a podrobné pokyny k montáži pro dřevěné sloupky a betonové/cihlové stěny.
	Návod k instalaci nástěnného držáku tabletu MOUNT-IT! s otočným ramenem Komplexní instalační manuál pro nástěnný držák tabletu MOUNT-IT! s otočným ramenem (modely MI-3774B_G10, MI-3774W_G10). Obsahuje seznam dílů, bezpečnostní upozornění, rozměry, nosnost a podrobné pokyny k montáži krok za krokem pro různé typy stěn a kompatibilitu tabletů.
	Výškově nastavitelný držák na TV s krbem - instalační průvodce MI-384 Komplexní instalační návod pro držák TV s nastavitelnou výškou MOUNT-IT! MI-384, který zahrnuje bezpečnostní pokyny, obsah balení, potřebné nářadí a postupnou montáž pro dřevěné sloupky a betonové/cihlové stěny.
	MOUNT-IT! MI-402 Návod k instalaci nástěnného držáku na TV s plným pohybem Comprehensive installation manual for the MOUNT-IT! MI-402 Full Motion TV Wall Mount with Extra Long Extension. Features safety guidelines, a detailed parts list, dimensions, step-by-step assembly instructions for various wall types (wood stud, concrete, brick), VESA bracket configuration, TV attachment, cable management, and adjustment details. Includes contact information for support.
	Návod k instalaci nástěnného držáku pro TV s dlouhým výsuvem a plným pohybem (MI-372v3) Komplexní návod k instalaci držáku na zeď Mount-It! MI-372(v3) s dlouhým výsuvem a plným pohybem na televizi. Obsahuje seznam dílů, podrobný návod k montáži, možnosti montáže na zeď a návod k nastavení.
	Montážní manuál pro stojan na tablet MOUNT-IT! s držákem dokumentů Tato instalační příručka obsahuje podrobné pokyny k sestavení a montáži stojanu na tablet MOUNT-IT! s držákem dokumentů, včetně seznamů dílů, bezpečnostních upozornění a pokynů k použití pro modely MI-3770B_G10 a MI-3770W_G10.

Mount-It! MI-790