Zavedení
This manual provides essential information for the installation, operation, and maintenance of your GROHE Defined 29 302 Floor Mounted Tub Filler with Built-In Diverter and Hand Shower. Please read these instructions carefully before installation and retain them for future reference. Proper installation and maintenance will ensure optimal performance and longevity of your product.
Bezpečnostní informace
- Před zahájením jakékoli instalace nebo údržby vždy uzavřete hlavní přívod vody.
- Ujistěte se, že všechny vodovodní spoje jsou bezpečné, aby nedošlo k únikům.
- Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
- Protect the product's finish from harsh chemicals and abrasive cleaning materials.
Nastavení a instalace
The GROHE Defined 29 302 Floor Mounted Tub Filler requires a separate rough-in set for installation. Refer to the specific installation instructions provided with your rough-in kit for detailed steps on preparing the floor and water connections. This section focuses on the final assembly of the visible tub filler components.
Required Tools (General)
- Nastavitelný klíč
- Screwdriver (Phillips/Flathead as needed)
- Instalatérská páska
- Měkká látka
Kroky instalace (viz výše)view)
- Ensure the rough-in body is securely installed and water connections are ready according to its specific instructions.
- Attach the tub filler body to the rough-in, ensuring all seals are correctly seated.
- Secure the tub filler to the floor using the provided mounting hardware.
- Connect the hand shower hose to the designated outlet on the tub filler body.
- Install the hand shower into its holder.
- Carefully turn on the water supply and check for any leaks.
Obrázek 1: The GROHE Defined Floor Mounted Tub Filler with its integrated hand shower, showcasing the Starlight Chrome finish.
Obrázek 2: Technical drawing illustrating the key dimensions of the tub filler, including height, spout reach, and clearance.
Návod k obsluze
Tub Filler Operation
- Zapnutí/vypnutí: Lift the single lever handle to turn on the water flow. Push down to turn off.
- Ovládání teploty: Rotate the lever handle left for hotter water and right for colder water.
- Řízení toku: Adjust the height of the lever to control the water volume.
Hand Shower and Diverter Operation
- Activating Hand Shower: Pull the diverter knob located on the tub filler body to switch water flow from the tub spout to the hand shower.
- Returning to Tub Spout: Push the diverter knob back in to direct water flow to the tub spout.
- Using Hand Shower: Remove the hand shower from its holder and direct the spray as desired.
This product features GROHE EcoJoy technology, designed to deliver a perfect flow while reducing water consumption.
Údržba a čištění
To maintain the pristine appearance and functionality of your GROHE tub filler, follow these cleaning and maintenance guidelines:
- Čištění povrchové úpravy: Clean the Starlight Chrome finish with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures.
- Vyhněte se drsným čisticím prostředkům: Nepoužívejte abrazivní houbičky, drátěnky ani čisticí prostředky obsahující alkohol, amoniak, bělidlo nebo kyselinu fosforečnou, protože by mohly poškodit povrchovou úpravu.
- SilkMove Cartridge: The GROHE SilkMove cartridge ensures smooth and precise operation of the lever. No special maintenance is typically required for the cartridge itself.
- Trysky ruční sprchy: Periodically clean the nozzles of the hand shower to remove any mineral buildup. Many GROHE hand showers feature flexible silicone nozzles that can be easily wiped clean.
Obrázek 3: Visual representation of GROHE technologies: Starlight Chrome finish, SilkMove for smooth operation, and EcoJoy for water efficiency.
Odstraňování problémů
If you encounter issues with your tub filler, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nízký průtok vody | Partially closed shut-off valves, clogged aerator/nozzles, or debris in water lines. | Ensure shut-off valves are fully open. Clean hand shower nozzles. Flush water lines if necessary. |
| Netěsnosti z přípojek | Uvolněné spoje, poškozené O-kroužky nebo těsnění. | Tighten connections. Inspect and replace O-rings or seals if damaged. |
| Diverter not switching flow | Debris in diverter mechanism or worn diverter. | Flush the system. If problem persists, contact customer support. |
| Problémy s teplotou vody | Incorrect hot/cold supply connections or issues with water heater. | Verify hot and cold supply lines are correctly connected. Check water heater settings. |
If these solutions do not resolve the issue, please contact GROHE customer support or a qualified plumber.
Specifikace
- Číslo modelu: 29
- Značka: GROHE
- Typ dokončení: Hvězdný chrom
- Materiál: Kov
- Počet držadel: 1
- Typ montáže: Montáž na podlahu
- Celková výška: Approximately 37-1/2 inches (from bottom to top of faucet)
- Výška hubice: Approximately 32-3/8 inches (deck to spout outlet)
- Dosah hubice: Approximately 11-9/16 inches (center of faucet body to center of spout outlet horizontally)
- Hand Shower Flow Rate: 1.75 gallons-per-minute (GPM)
- Tub Filler Flow Rate: 6 gallons-per-minute (GPM)
- Hand Shower Hose Length: 49 palců
- Faucet Holes Required: 1 (minimálně)
- Hmotnost položky: Přibližně 16.9 libry
Informace o záruce
GROHE products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. For detailed information regarding the specific warranty terms and conditions applicable to your GROHE Defined 29 302 Floor Mounted Tub Filler, please refer to the official warranty documentation provided with your purchase or visit the official GROHE webmísto.
Zákaznická podpora
If you require further assistance, have questions about installation, operation, or need to report a product issue, please contact GROHE customer service. Contact information can typically be found on the GROHE webna místě nebo v obalových materiálech.
GROHE Webmísto: www.grohe.us
