1. Úvod
The Memphis Audio SE1040 10-inch Street Edge Single 4-Ohm Subwoofer is designed to deliver impressive bass performance for your vehicle's audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.
Klíčové vlastnosti:
- Polypropylene SE branded cone for durability and sound quality.
- Rubber surround for enhanced excursion and longevity.
- 1.5-inch copper voice coil for efficient power handling.
- 27oz magnet for robust motor structure.
- DVVC Direct Vent Voice Coil Cooling for thermal management.
2. Bezpečnostní informace
Please read all safety instructions before installing or operating your subwoofer. Failure to do so may result in injury or damage to the product or vehicle.
- Před zahájením jakýchkoli elektrických prací vždy odpojte záporný pól baterie vozidla.
- Ujistěte se, že veškeré vedení je řádně izolováno a zajištěno, aby se zabránilo zkratům a poškození.
- Avoid mounting the subwoofer in locations where it may obstruct driver visibility or interfere with vehicle safety systems.
- Nevystavujte subwoofer nadměrné vlhkosti ani extrémním teplotám.
- Use appropriate hearing protection when testing or operating the audio system at high volumes.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Memphis Audio SE1040 10" Subwoofer (Model: SE1040-UVG)
4. Nastavení a instalace
Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any part of the installation process, consult a professional car audio installer.
4.1 Pokyny pro montáž
The SE1040 subwoofer is designed for installation in a suitable enclosure (not included). The enclosure type (sealed, ported, bandpass) will significantly impact the subwoofer's performance characteristics. Refer to recommended enclosure specifications from Memphis Audio for optimal results.
- Ensure the mounting surface is rigid and free from vibrations.
- Allow adequate clearance around the subwoofer for proper air circulation and excursion.
- Secure the subwoofer firmly to the enclosure using appropriate screws and gaskets to prevent air leaks.
Obrázek 1: Úhlové view of the Memphis Audio SE1040 10-inch subwoofer, showcasinkužel a jeho obvod.
Obrázek 2: Shora dolů view of the Memphis Audio SE1040 10-inch subwoofer, highlighting the 'SE Street Edge' branding on the cone.
4.2 Zapojení kabeláže
The SE1040 is a single 4-Ohm subwoofer. Connect the subwoofer to a compatible amplifier that can safely operate at a 4-Ohm load. Ensure correct polarity (+ to + and - to -) to avoid phase issues and ensure optimal sound reproduction.
- Use high-quality speaker wire of appropriate gauge for the power level and distance.
- Strip wire ends carefully and ensure no stray strands can cause short circuits.
- Securely connect wires to the subwoofer's push terminals.
Obrázek 3: Strana view of the Memphis Audio SE1040 10-inch subwoofer, showing the rear magnet structure and speaker wire terminals.
5. Provoz
Once installed, the subwoofer operates as part of your vehicle's overall audio system. Proper amplifier settings and head unit adjustments are essential for optimal performance.
5.1 AmpPárování záchranářů
Ujistěte se, že vaše amplifier's RMS power output matches the subwoofer's RMS power handling (200 watts). Overpowering or underpowering can lead to damage or poor performance.
5.2 Initial Sound Adjustment
- Začněte s ampovládání zesílení zařízení Liferier na minimálním nastavení.
- Pusťte si známou skladbu se silným basovým obsahem.
- Pomalu zvyšujte amplifier's gain until the subwoofer blends seamlessly with the rest of your audio system without distortion.
- Adjust the low-pass filter (LPF) on your amplifier or head unit to prevent the subwoofer from playing frequencies it is not designed for, typically between 80Hz and 120Hz.
6. Údržba
The Memphis Audio SE1040 subwoofer requires minimal maintenance to ensure long-term performance.
- Periodically inspect the subwoofer cone and surround for any signs of damage or wear.
- Keep the subwoofer free from dust and debris. Use a soft, dry cloth for cleaning.
- Ujistěte se, že všechna kabelová připojení zůstanou bezpečná.
7. Řešení problémů
Pokud máte problémy se subwooferem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk ze subwooferu | Žádná síla ampuvolněné zapojení; amplifier in protect mode; incorrect head unit settings. | Kontrola amplifier power and ground connections. Verify remote turn-on wire. Inspect all speaker wires. Check amplifier fuses. Adjust head unit settings (subwoofer output, volume). |
| Zkreslené nebo nejasné basy | Amplifier gain set too high; incorrect LPF setting; damaged subwoofer; poor enclosure. | Snížit amplifier gain. Adjust LPF. Inspect subwoofer cone and surround for damage. Ensure enclosure is sealed and properly constructed. |
| Subwoofer se občas vypínal | Loose wiring; amppřehřátí záchranného okruhu; nesoulad impedance. | Check all wiring connections. Ensure amplifier has adequate ventilation. Verify amplifier is stable at the subwoofer's 4-Ohm impedance. |
8. Specifikace
Detailed technical specifications for the Memphis Audio SE1040 10" Street Edge Single 4-Ohm Subwoofer:
| Specifikace | Hodnota |
|---|---|
| Název modelu | SE1040 |
| Typ reproduktoru | Subwoofer |
| Doporučená použití pro produkt | Vozidlo |
| Průměr subwooferu | 10 palce |
| Počet jednotek | 1.0 Počet |
| Zahrnuté komponenty | SE1040-UVG |
| Rozměry produktu | 6.3"H x 11.61"Š x 5.3"V |
| Hmotnost položky | 7.7 libry |
| Impedance | 4 Ohmy |
| Počet položek | 1 |
| Velikost reproduktoru | 10 palce |
| Zdroj napájení | Corded Electric (for amplifier connection) |
| Průměr basového reproduktoru | 10 palce |
| Typ služby vozidla | SUVs, Select Cars, Truck |
| Velikost zvukového ovladače | 10 palce |
| UPC | 702588210085 |
| Výrobce | Memphis Audio |
| Maximální výstupní výkon reproduktoru | 200 Wattů RMS / 400 Wattů Špičkový |
| Technologie připojení | Pomocný, RCA (přes ampživější) |
| Typ montáže | Zapuštěná montáž |
9. Informace o záruce
Memphis Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty information, please contact Memphis Audio customer support or refer to the warranty card included with your product, if applicable.
10. Zákaznická podpora
For further assistance, technical support, or inquiries regarding your Memphis Audio SE1040 subwoofer, please contact Memphis Audio directly.
- Výrobce: Memphis Audio
- Internetový obchod: Visit the Memphis Audio Store on Amazon
