1. Úvod
This manual provides detailed instructions for the assembly, operation, and maintenance of your Hemudu HT2001BP Universal Swivel TV Stand. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are essential for optimal performance and safety.
2. Bezpečnostní informace
- Nosnost: Do not exceed the maximum load capacity of 45 kg (99 lbs) for the TV. Each shelf supports up to 10 kg (22 lbs).
- Velikost televizoru: This stand is designed for TVs ranging from 19 to 42 inches.
- Kompatibilita VESA: Ensure your TV's VESA mounting pattern is compatible: 75x75mm, 100x100mm, 200x100mm, or 200x200mm.
- Stabilní povrch: Always place the TV stand on a flat, stable, and level surface to prevent tipping.
- Děti a domácí mazlíčci: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand.
- Bezpečná instalace: Ensure all screws are tightened securely before use. Do not overtighten.
- Správa kabelů: Use the provided cable management clips to organize cables and prevent tripping hazards.
3. Obsah balení
Před zahájením montáže se prosím ujistěte, že jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.
- Základna z tvrzeného skla
- Main Support Pillar
- Držák na TV
- Horní police
- Dolní police
- Hardware Kit (various screws, washers, spacers, and tools)
- Klipy pro správu kabelů
- Návod k použití
Included TV Mounting Screws: M4x30mm, M6x30mm, M8x45mm, along with various spacers and washers to ensure compatibility with different TV models.
Image: VESA compatibility and included mounting hardware. This diagram illustrates how to measure your TV's VESA pattern and shows the different screw types and spacers provided for secure TV attachment.
4. Pokyny k instalaci a montáži
Pro správnou montáž pečlivě dodržujte tyto kroky. Pro některé kroky se doporučuje, aby je provedly dvě osoby, zejména při montáži televizoru.
- Attach Main Pillar to Base: Secure the main support pillar to the tempered glass base using the designated screws and tools from the hardware kit. Ensure it is firmly attached and stable.
- Instalace montážního držáku televizoru: Attach the TV mounting bracket to the main support pillar at your desired initial height. The bracket allows for 16 levels of height adjustment.
- Připevnění polic: Install the upper and lower shelves to the main support pillar. The shelves can be adjusted vertically to accommodate your media devices. The upper shelf features a heat dissipation design.
- Příprava televizoru k montáži: Identify your TV's VESA mounting pattern. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Attach the TV bracket adapters to the back of your TV.
- Upevnění televizoru na stojan: Carefully lift your TV and hook it onto the TV mounting bracket on the stand. Secure the TV in place using the safety lock screws.
- Správa kabelů: Use the provided cable clips to route and organize all TV and device cables along the main pillar, ensuring a tidy and safe setup.
Image: Component details including 10mm tempered glass, cable management, rubber gaskets, and screw storage. This image highlights key features that aid in assembly and long-term use.
5. Návod k obsluze
Your Hemudu HT2001BP TV stand offers several adjustment options for an optimal viewzkušenosti.
- Nastavení otáčení: The TV mount can swivel ±50 degrees (100 degrees total) left or right. Gently push the TV screen to adjust the viewúhel.
- Nastavení sklonu: The TV mount allows for a tilt range of -15 degrees (downward) to +10 degrees (upward). Loosen the tilt knobs on the bracket, adjust to the desired angle, and re-tighten securely.
- Nastavení výšky: The TV mounting bracket can be adjusted to 16 different height levels, offering an adjustment range of approximately 7.9 inches. To adjust, loosen the securing bolts on the pillar, slide the bracket to the new height, and re-tighten the bolts firmly.
- Seřízení police: The upper and lower shelves can be repositioned along the main pillar to suit your equipment. Loosen the shelf clamps, move the shelf to the desired height, and re-tighten the clamps.
Image: Swivel functionality. The TV stand allows for a 100-degree swivel, providing flexible viewing angles in a room.
Image: Tilt functionality. The TV can be tilted up or down to reduce glare and optimize viewing from different positions.
Image: 16-level height adjustment. This feature allows users to set the TV at an ergonomic viewing výška.
Image: Shelf adjustment. The shelves can be adjusted to accommodate various media devices, with the top shelf designed for heat dissipation.
6. Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho televizního stolku.
- Čištění: Otřete stojan měkkým, suchým hadříkem. Na odolné skvrny použijte lehceamp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte, ale nepřetahujte je.
- Kontrola poškození: Regularly inspect the tempered glass base and steel pillar for any signs of damage, cracks, or bending. Discontinue use if damage is found and contact customer support.
7. Řešení problémů
Pokud narazíte na jakékoli problémy s televizním stolkem, podívejte se na následující běžné problémy a jejich řešení:
- Stojan je nestabilní:
- Ujistěte se, že všechny montážní šrouby jsou zcela utažené.
- Verify the stand is placed on a flat, level surface.
- Check that the TV weight and size are within the specified limits.
- Difficulty Adjusting Swivel/Tilt:
- For tilt, ensure the tilt knobs are sufficiently loosened before attempting to adjust. Re-tighten after adjustment.
- Ensure no cables are obstructing movement.
- TV není vodorovně:
- Check that the TV mounting bracket is installed evenly on the main pillar.
- Ensure the TV is properly seated on the bracket and secured with the safety lock.
Pokud problém přetrvává, požádejte o pomoc zákaznickou podporu.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | HT2001BP |
| Značka | Hemudu |
| Kompatibilní velikosti TV | 19 - 42 palce |
| Maximum TV Load Capacity | 45 kg (99 lb) |
| Maximální nosnost police | 10 kg (22 liber) na polici |
| Kompatibilita VESA | 75x75mm, 100x100mm, 200x100mm, 200x200mm |
| Úhel otočení | ±50 stupňů (celkem 100 stupňů) |
| Úhel náklonu | -15 stupňů až +10 stupňů |
| Nastavení výšky | 16 levels, approx. 7.9-inch range |
| Rozměry základny | 55 x 38 cm (21.7 x 15 palců) |
| Materiál | Tvrzené sklo, ocel |
| Barva | Černý |
9. Záruka a podpora
For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer or seller directly. Keep your purchase receipt as proof of purchase.
