Zavedení
This manual provides essential information for the safe and effective operation, installation, and maintenance of your Richmat HJA1S Actuator Motor. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Richmat HJA1S Actuator Motor, showing the main unit, wired remote control, and power cord.
Bezpečnostní informace
- Před prováděním jakékoli údržby nebo instalace vždy odpojte napájení.
- Ujistěte se, že všechna připojení jsou bezpečná a správně zapojena, abyste předešli úrazu elektrickým proudem.
- Do not attempt to open or repair the motor unit. Refer to qualified service personnel for repairs. The product label explicitly states: "NOT TO BE OPENED BY UNAUTHORIZED PERSON".
- Během provozu udržujte ruce a volný oděv v dostatečné vzdálenosti od pohyblivých částí.
- This motor is designed for adjustable bed frames and hospital beds. Do not use for unintended applications.
Figure 2: Product label displaying model number, input voltage, stroke, max load, duty cycle, and safety warnings.
Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- 1 x Richmat HJA1S Actuator Motor
- 1 x kabelové dálkové ovládání
- 1 x Napájecí kabel
Nastavení a instalace
This actuator motor is designed for easy replacement in compatible adjustable bed frames. Ensure the bed frame is unplugged from the power outlet before beginning installation.
- Kontrola kompatibility: Before installation, verify that the center distance between the two mounting bars on your old motor is approximately 581 mm (±2mm). This motor is a replacement for OKIMAT 2, DEWERT OKIN LIMOSSI, and similar dual actuator motors.
- Demontáž starého motoru: Carefully disconnect the old motor from the bed frame and unplug any electrical connections.
- Position New Motor: Align the new Richmat HJA1S motor with the mounting points on your bed frame.
- Zabezpečený motor: Secure the motor to the bed frame using appropriate fasteners (not included, typically reused from the old motor or provided with the bed frame). Ensure it is firmly attached and stable.
- Připojení dálkového ovládání: Plug the wired remote control into the designated port on the actuator motor.
- Připojte napájení: Plug the power cord into the motor, then plug the other end into a standard 110V power outlet.
Figure 3: Dimensional drawing indicating the 581mm center distance between mounting points, crucial for compatibility.
Figure 4: The wired remote control used to operate the bed's adjustable functions.
Figure 5: The standard 2-prong power plug for connecting the motor to an electrical outlet.
Návod k obsluze
The Richmat HJA1S actuator motor provides functional back and foot rise and fall adjustments for your bed frame. It does not control the overall height of the bed or provide massage functions.
- Dálkové ovládání: Use the wired remote control to adjust the bed's positions. The remote typically has buttons for:
- Head Up / Head Down
- Foot Up / Foot Down
- Operace: Press and hold the desired button on the remote control to move the corresponding section of the bed. Release the button to stop movement.
- Pracovní cyklus: The motor has a duty cycle of 10% max, meaning it can operate for 2 minutes continuously, followed by 18 minutes of rest. This prevents overheating and prolongs motor life. Avoid continuous operation beyond the recommended duty cycle.
Údržba
The Richmat HJA1S actuator motor requires minimal maintenance. Following these guidelines will help ensure its longevity:
- Čištění: Wipe the exterior of the motor and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the motor housing or remote.
- Kontrola kabelů: Periodically inspect the power cord and remote control cable for any signs of damage, fraying, or kinks. Replace if damage is found.
- Kontrola montáže: Occasionally check that the motor remains securely mounted to the bed frame. Tighten any loose fasteners.
- Vyhněte se přetížení: Do not exceed the maximum load capacity of the motor (6500N x 2).
Odstraňování problémů
If you encounter issues with your actuator motor, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nereaguje na dálkové ovládání. | No power, loose connection, faulty remote. |
|
| Motor běží přerušovaně. | Overheating (duty cycle exceeded), loose wiring. |
|
| Neobvyklý hluk během provozu. | Obstruction, worn parts, improper installation. |
|
If the problem persists after attempting these solutions, please contact Richmat customer support.
Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | HJA1S |
| Číslo modelu položky | hja1 |
| Značka | Richmat |
| Vstupní objemtage | AC 100V-240V~50/60Hz |
| Max. Zatížení | 2 x 6500N |
| Stroke (Head) | 87 mm |
| Stroke (Foot) | 69 mm |
| Pracovní cyklus | 10% max, 2mins/18mins |
| Hmotnost položky | 5 kilogramu (11.02 libry) |
| Koňská síla | 50 wattů |
| Rozměry balení | 29.37 x 7.87 x 6.42 palce |
Informace o záruce
The Richmat HJA1S Actuator Motor comes with a jednoletá záruka against non-human damage. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modification, or failure to follow the instructions in this manual.
Uschovejte si prosím doklad o koupi pro uplatnění záruky.
Zákaznická podpora
For technical assistance, warranty claims, or general inquiries, please contact Richmat customer support through the retailer where the product was purchased or refer to the manufacturer's official webstránky pro kontaktní údaje.
Pro více informací můžete navštívit stránka produktu na Amazonu.
