Uživatelská příručka k ethernetovému mostu Arris MEB1100 MoCA

1. Úvod

This user manual provides detailed instructions for the installation, operation, and maintenance of the Arris MEB1100 MoCA to Ethernet Bridge. The MEB1100 is designed to extend your home network by converting coaxial cable signals (MoCA) into Ethernet, allowing for high-speed internet access in areas without direct Ethernet wiring.

2. Konec produktuview

2.1 Obsah balení

• Arris MEB1100 MoCA to Ethernet Bridge
• Napájecí adaptér
• Ethernetový kabel
• Koaxiální kabel

2.2 Vlastnosti zařízení

• Converts MoCA (Multimedia over Coax Alliance) signals to standard Ethernet.
• Enables high-speed wired network connections over existing coaxial cabling.
• Supports data transfer rates up to 1 Gigabit per second.
• Compact and discreet design.

2.3 Fyzické komponenty

The Arris MEB1100 features essential ports and indicators for its operation.

Obrázek 1: Přední view of the Arris MEB1100 MoCA to Ethernet Bridge. This image shows the top surface of the device, which is black with a textured pattern and the "ARRIS" logo prominently displayed. A coaxial connector extends from the right side.

Obrázek 2: Zadní view of the Arris MEB1100 MoCA to Ethernet Bridge. This image displays the back panel of the device, highlighting the Ethernet port (red), power input (blue), and coaxial input/output port. The device has a ribbed design for ventilation.

Obrázek 3: Strana view of the Arris MEB1100 MoCA to Ethernet Bridge. This image shows the device from a slightly elevated side angle, emphasizing its compact form factor and the ventilation grilles on the top surface. The coaxial connector is visible at the bottom right.

3. Pokyny k nastavení

Follow these steps to set up your Arris MEB1100 MoCA to Ethernet Bridge:

1. Identify MoCA Network: Ensure you have an active MoCA network in your home. This typically involves a MoCA-enabled router or a primary MoCA adapter connected to your main internet source.
2. Připojení koaxiálního kabelu: Connect one end of a coaxial cable to the coaxial wall outlet in the room where you want to extend your network. Connect the other end of the coaxial cable to the "Coax In" port on the Arris MEB1100.
3. Connect Ethernet Device: Connect one end of an Ethernet cable to the Ethernet port on the Arris MEB1100. Connect the other end of the Ethernet cable to the device you wish to connect to the network (e.g., computer, smart TV, gaming console).
4. Připojte napájení: Plug the power adapter into the power port on the Arris MEB1100. Then, plug the power adapter into a standard electrical outlet.
5. Ověřit připojení: Allow a few moments for the device to power on and establish a MoCA connection. Check the indicator lights on the device (if present, though not specified in product details, common for network devices) to confirm a successful connection. A solid light typically indicates a stable link.

Poznámka: For optimal performance, ensure all coaxial splitters in your home are MoCA-compatible (5-1675 MHz or higher).

4. Obsluha zařízení

Once set up, the Arris MEB1100 operates automatically. It acts as a transparent bridge, converting MoCA signals to Ethernet and vice-versa, allowing your connected Ethernet device to access the network.

• Přístup k síti: The device connected to the MEB1100's Ethernet port will automatically obtain an IP address from your router and gain network and internet access.
• Výkon: The MEB1100 supports Gigabit Ethernet speeds, providing high-bandwidth connectivity for streaming, gaming, and large file transfers over your coaxial network.

5. Údržba

The Arris MEB1100 is designed for minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

• Čištění: K čištění vnější strany zařízení používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani aerosolové spreje.
• Větrání: Ujistěte se, že je zařízení umístěno v dobře větraném prostoru. Neblokujte větrací otvory.
• Prostředí: Chraňte zařízení před přímým slunečním zářením, zdroji tepla a nadměrnou vlhkostí.
• Aktualizace firmwaru: Firmware updates are typically managed by your internet service provider if the device is part of their managed equipment. For retail units, check the manufacturer's webstránky pravidelně pro aktualizace.

6. Řešení problémů

If you encounter issues with your Arris MEB1100, refer to the following troubleshooting steps:

6.1 Žádné síťové připojení

• Zkontrolujte napájení: Ensure the power adapter is securely connected to the MEB1100 and a working electrical outlet.
• Check Coaxial Connection: Verify that the coaxial cable is securely connected to both the wall outlet and the MEB1100's "Coax In" port.
• Check Ethernet Connection: Ensure the Ethernet cable is securely connected to both the MEB1100 and your connected device.
• Verify MoCA Network: Confirm that your primary MoCA network (router or main MoCA adapter) is operational and broadcasting a MoCA signal.
• Restartujte zařízení: Power cycle the MEB1100, your router, and the connected Ethernet device. Unplug them from power for 30 seconds, then plug them back in.

6.2 Pomalá rychlost sítě

• Kvalita kabelu: Ensure you are using high-quality coaxial and Ethernet cables.
• MoCA Splitters: If you have coaxial splitters, ensure they are MoCA-compatible (rated for 5-1675 MHz or higher). Non-compatible splitters can degrade signal quality.
• Rušení: Check for potential sources of interference near the coaxial cabling or the MEB1100.
• Přetížení sítě: Other devices on your network might be consuming bandwidth.

7. Specifikace

8. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Arris support webZáruční podmínky se mohou lišit v závislosti na regionu a prodejci.

• Online podpora: www.arris.com/support (Napřampodkaz, skutečný odkaz se může lišit)
• Kontakt: Refer to your product packaging or the Arris webstránky s kontaktními údaji zákaznického servisu.