Zavedení
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Lithonia Lighting CPX 2X2 LED Flat Panel Ceiling Light. Please read all instructions carefully before proceeding with installation or use. The 2 ft. x 2 ft. CPX panel is designed to provide a crisp and clean aesthetic with 3200 lumens and a 3500 Kelvin color temperature, suitable for various indoor applications.
Důležité bezpečnostní informace
Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on this fixture. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation. All wiring must comply with local and national electrical codes. If you are unsure about any part of the installation process, consult a qualified electrician.
Konec produktuview
Figure 1: Lithonia Lighting CPX 2X2 LED Flat Panel Ceiling Light.
Figure 2: Product dimensions showing 23.8 inches by 23.8 inches by 1.7 inches.
Figure 3: Key features including long-life LEDs, smooth lens, and durable backplate.
Produktová videa
Video 1: A 10-second spin video showcasing the Lithonia Lighting CPX panel light from various angles, highlighting its sleek design.
Video 2: An informational video discussing the quality components and reliability of Lithonia Lighting CPX panels, emphasizing their long-term support and use of name-brand LEDs and drivers.
Pokyny k instalaci
Požadované nástroje:
- Šroubovák
- Odizolovače drátů
- Ochranné brýle
- Rukavice
- Wire Nuts (included)
Instalace krok za krokem:
- Vypnout napájení: Disconnect power at the main breaker and put on the correct personal protective equipment (PPE).
- Panel pozic: Place the CPX panel into the T-grid ceiling.
- Access Driver Box: Remove or push aside the ceiling tile adjacent to the CPX Driver Box to access the wiring components.
- Bezpečné upevnění: Bend each integrated T-grid clip away from the fixture housing and secure onto the T-grid railing.
- Kabelová připojení: Remove the driver box access plate and knockouts. Make all electrical connections per local NEC code requirements. Connect white to white, black to black, and green to green using the included wire nuts.
- Obnovit napájení: Tuck all wires back into the driver box, replace the access plate, and restore power.
Figure 4: Visual guide for the 6-step installation process of the CPX LED Flat Panel.
Instalační video
Video 3: A detailed video demonstrating the installation process of the flat panel light in a T-grid ceiling, including wiring connections.
Návod k obsluze
This Lithonia Lighting CPX 2X2 LED Flat Panel is designed for straightforward operation. Once properly installed and power is restored, the light will illuminate. This specific model provides a fixed 3200 lumens output at a 3500K warm white color temperature.
The fixture is equipped with a 0-10 volt driver, allowing it to dim down to 10 percent when connected to a compatible 0-10V dimmer switch (sold separately). Consult the dimmer manufacturer's instructions for proper wiring and operation.
Údržba
To ensure optimal performance and longevity of your LED flat panel, follow these simple maintenance guidelines:
- Čištění: Periodically clean the lens with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo čočku.
- Inspekce: Annually inspect all electrical connections for tightness and ensure there are no signs of wear or damage.
- LED diody: The integrated LEDs are designed for long life and do not require replacement.
Před jakýmkoli čištěním nebo kontrolou vždy odpojte napájení.
Odstraňování problémů
If your LED flat panel is not functioning as expected, consider the following troubleshooting steps:
- Žádné světlo: Verify that the power supply is connected and the circuit breaker is in the ON position. Check all wire connections for proper contact.
- Blikající světlo: Ensure all connections are secure. If using a dimmer, confirm it is a compatible 0-10V dimmer and properly installed.
- Problémy se stmíváním: Check the dimmer switch and its wiring. Ensure the dimmer is rated for LED loads.
If the issue persists after performing these checks, contact customer support.
Specifikace produktu
| Značka | Osvětlení Lithonia |
| Číslo modelu | CPX 2X2 3200LM 35K M4 |
| Rozměry produktu | 24 cm D x 23.8 cm Š x 1.7 cm V |
| Teplota barev | 3500 Kelvinů (teplá bílá) |
| Jas | 3200 XNUMX lumenů |
| Wattage | 34 wattů |
| svtage | 120-277 Volts (MVOLT) |
| Materiál | Hliník |
| Typ dokončení | Satin Lens |
| Typ instalace | Recessed (Surface mount kit sold separately) |
| Speciální funkce | 0-10V Dimmable (dims down to 10%) |
| Certifikace | CSA Certified, IC Certified, DLC Certified, Damp Místo ohodnoceno |
| Hmotnost položky | 3.89 libry |
Informace o záruce
This Lithonia Lighting CPX LED Flat Panel is covered by a 5letá omezená záruka. This warranty ensures the product is free from defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Lithonia Lighting webmísto.
Zákaznická podpora
For further assistance, technical support, or warranty claims, please contact Lithonia Lighting customer service. You can typically find contact information on the product packaging or by visiting the official Lithonia Lighting webmísto.
