Karlsson KA5805WD LED budík Uživatelská příručka

1. Konec produktuview

The Karlsson KA5805WD is a modern, hexagonal LED alarm clock designed to display time, day, date, and temperature. Its minimalist design allows it to be placed on a table or mounted on a wall. The clock features touch and sound activation for display control.

Obrázek 1: Přední strana view of the Karlsson KA5805WD LED Alarm Clock, showing the digital display for time, day, date, and temperature.

2. Nastavení

2.1 Vybalení

Carefully remove the alarm clock from its packaging. Ensure all components are present: the Karlsson KA5805WD LED Alarm Clock and a USB power cable. Batteries are not included and must be purchased separately.

2.2 Napájení zařízení

Budík lze napájet dvěma způsoby:

1. Napájení baterie: Open the battery compartment located on the back of the clock. Insert 3x AA batteries (not included), ensuring correct polarity (+/-). Battery power enables motion/sound activation and allows the clock to be portable. Note that battery life may vary depending on usage.
2. Napájení USB: Connect the provided USB cable to the DC 5V input port on the back of the clock. Plug the other end into a compatible USB power adapter (not included) or a powered USB port. Using USB power keeps the display continuously lit.

Obrázek 2: Zadní view of the alarm clock, highlighting the control buttons (MODE, UP, DOWN, ALARM) and the battery compartment.

3. Návod k obsluze

The control buttons (MODE, UP, DOWN, ALARM) are located on the back of the unit (refer to Figure 2).

3.1 Nastavení času a data

1. Stiskněte tlačítko MODE button to cycle through display modes (Time, Date, Temperature).
2. Chcete-li nastavit čas, stiskněte a podržte tlačítko MODE tlačítko, dokud nezačnou blikat číslice hodin.
3. Použijte UP a DOLŮ tlačítka pro nastavení hodiny.
4. Stiskněte MODE znovu pro přechod na minuty a poté upravte pomocí UP a DOLŮ.
5. Pokračujte v stisknutí MODE to set the year, month, and day in a similar manner.
6. Stiskněte MODE naposledy pro ukončení režimu nastavení.

3.2 Nastavení alarmu

1. Stiskněte tlačítko POPLACH jedním stisknutím tlačítka view aktuální čas alarmu.
2. Stiskněte a podržte POPLACH tlačítko , dokud nezačnou blikat číslice hodin budíku.
3. Použijte UP a DOLŮ tlačítky nastavte požadovanou hodinu buzení.
4. Stiskněte POPLACH again to set the alarm minutes, then adjust with UP a DOLŮ.
5. Stiskněte POPLACH one last time to confirm and exit.
6. Chcete-li aktivovat/deaktivovat budík, stiskněte tlačítko POPLACH button briefly when the alarm time is displayed. An indicator (e.g., a small dot or icon) will appear on the display when the alarm is active.

3.3 Zobrazení teploty

The clock automatically displays the ambient temperature. The unit of temperature (Celsius or Fahrenheit) can typically be switched by pressing the DOLŮ button during normal time display, though this may vary by firmware version.

3.4 Sound and Touch Activation

When operating on battery power, the display can be set to turn off automatically to conserve energy. To activate the display, simply touch the clock or make a sound (e.g., clap your hands) near it. The display will illuminate for a few seconds before turning off again.

4. Údržba

4.1 Čištění

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

4.2 Výměna baterie

When the display dims or the clock functions become erratic while on battery power, it is time to replace the batteries. Open the battery compartment, remove the old AA batteries, and insert new ones, ensuring correct polarity. Dispose of old batteries responsibly according to local regulations.

5. Řešení problémů

• Displej je prázdný nebo tmavý:
  • Check battery power. Replace batteries if necessary.
  • If using USB power, ensure the cable is securely connected and the power adapter is functional.
  • If on battery power, activate the display by touch or sound.
• Hodiny neukazují přesný čas:
  • Reset the time as per Section 3.1.
  • Ensure stable power supply (fresh batteries or reliable USB connection).
• Alarm nezní:
  • Verify the alarm is activated (check for the alarm indicator on the display).
  • Ujistěte se, že je čas budíku nastaven správně.
• Sound/Touch activation not working:
  • This feature primarily functions when the clock is powered by batteries. Ensure batteries are fresh.
  • Check if the clock is in a mode that disables this feature (refer to advanced settings if available, though not detailed in basic product info).

6. Specifikace

7. Záruka a podpora

7.1 Informace o záruce

This Karlsson product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty duration and terms may vary by region and retailer. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer.

7.2 Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your point of purchase or visit the official Karlsson website for support resources. Ensure you have your model number (KA5805WD) and proof of purchase ready when contacting support.