Zavedení
This manual provides instructions for the installation, operation, and maintenance of your mDesign Steel Wall Mount Organizer Hanger Rack Holder. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Vlastnosti produktu
- Materiál: Durable Steel construction.
- Design: Wall-mounted organizer with a mesh storage basket and multiple hooks.
- Kapacita: Features 8 hooks for hanging items and an accessory bar.
- Všestrannost: Suitable for organizing belts, ties, watches, sunglasses, wallets, and other small accessories.
- Barva: Graphite Gray finish.
- Hmotnostní limit: Up to 35 pounds (15.8 kg).
- Rozměry: Přibližně 15 x 6.25 x 2.75 palce (38.1 x 15.9 x 7 cm).
Image: The mDesign Steel Wall Mount Organizer Hanger Rack Holder, showcasing its mesh basket holding a watch and sunglasses, and hooks below holding various belts and ties.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 x mDesign Steel Wall Mount Organizer
- Montážní materiál (šrouby a hmoždinky)
Image: Close-up of the included mounting hardware, consisting of two screws and two wall anchors.
Nastavení a instalace
This organizer is designed for wall mounting. Ensure you have the necessary tools before starting.
Požadované nástroje (nejsou součástí dodávky):
- Tužka
- Vrtat
- Drill bit appropriate for wall anchors (typically 1/4 inch or 6mm for drywall)
- Šroubovák s křížovou hlavou
- Vodováha (volitelné, pro přesné zarovnání)
Kroky instalace:
- Vyberte umístění: Choose a suitable wall location in your bedroom, hall, or closet. Ensure the surface is appropriate for mounting (Wall, Drywall, Wood, Concrete).
- Mark Holes: Hold the organizer against the wall at the desired height and use a pencil to mark the positions for the two mounting holes. Use a level to ensure it is straight.
- Vrtací pilotní otvory: Using a drill, create pilot holes at the marked locations. For drywall, use a drill bit slightly smaller than the wall anchors. For wood, a smaller pilot hole is sufficient.
- Insert Anchors (for Drywall/Concrete): If mounting into drywall or concrete, gently tap the plastic wall anchors into the pilot holes until they are flush with the wall surface.
- Mount Organizer: Align the organizer's mounting holes with the pilot holes (or anchors). Insert the screws through the organizer and into the wall/anchors.
- Zajistit: Tighten the screws with a Phillips head screwdriver until the organizer is firmly secured to the wall. Do not overtighten.
Image: A diagram illustrating the product dimensions: 15 inches (38.1 cm) in width, 6.25 inches (15.9 cm) total height, and 2.75 inches (7 cm) height for the basket.
Návod k obsluze (Použití)
Once installed, the organizer is ready for use:
- Top Basket: Use the mesh basket to store smaller items such as watches, sunglasses, wallets, keys, or other small accessories.
- Háčky: Hang belts, ties, scarves, or other hanging accessories on the 8 individual hooks.
- Accessory Bar: The lower wavy bar can be used for additional hanging storage for items like necklaces or smaller scarves.
- Rozložení hmotnosti: Distribute the weight evenly across the hooks and basket to maintain stability and prevent damage. Do not exceed the maximum weight limit of 35 pounds (15.8 kg).
Image: The mDesign organizer configured for jewelry storage, with necklaces on the hooks and bracelets, earrings, and a perfume bottle in the top mesh basket.
Údržba
To keep your organizer in optimal condition:
- Čištění: Otřete měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
- Inspekce: Pravidelně kontrolujte upevňovací šrouby, zda jsou pevně utažené. V případě potřeby je dotáhněte.
- Vyhněte se přetížení: Do not exceed the stated weight capacity to prevent bending or detachment from the wall.
Odstraňování problémů
- Organizer feels loose:
Ensure mounting screws are fully tightened. If mounted into drywall, check if the anchors are secure. If the wall material is compromised, consider relocating or using stronger anchors.
- Items falling off hooks:
Ensure items are properly placed on the hooks. Avoid overloading individual hooks or the entire unit beyond its weight capacity.
Specifikace
| Značka | mDesign |
| Číslo modelu | 07569MDCO |
| Materiál | Ocel |
| Barva | Grafit |
| Typ montáže | Držák na zeď |
| Počet háčků | 8 |
| Rozměry položky (D x Š x V) | 15 x 6.25 x 2.75 palce (38.1 x 15.9 x 7 cm) |
| Hmotnost položky | 12 unce (0.34 kilogramů) |
| Maximální nosnost | 35 liber (15.8 kg) |
| UPC | 192173075692 |
