Uživatelská příručka k chytrému vypínači světel WeMo

1. Úvod

The WeMo Smart Light Switch provides total control over your lighting. This device allows you to turn lights on and off from the wall, through a dedicated mobile application, or using voice commands via compatible smart assistants. Designed for versatility, the WeMo Light Switch supports both single-pole and 3-way circuit installations, requiring only one Smart Light Switch per 3-way circuit. It also enables the creation of automated schedules and timers for enhanced convenience and energy management.

2. Důležité bezpečnostní informace

WARNING! Risk of electric shock. Incorrect installation could be dangerous or illegal.

Always ensure that power is completely shut off at the circuit breaker before beginning any installation or maintenance. Multiple breakers and/or fuses may need to be shut off for safe installation. If you are unfamiliar or uncomfortable with electrical work, it is highly recommended to call a professional electrician.

This device requires a neutral wire for operation. If your electrical box does not contain a neutral wire, this product will not function correctly. Consult a qualified electrician to verify your wiring configuration.

3. Obsah balení

• 2x WeMo Light Switch 3-Way
• Rychlý průvodce

Image: Two WeMo 3-Way Light Switches, white in color, with their respective faceplates. The switches feature a toggle design with a small circular indicator light at the bottom.

4. Specifikace

5. Nastavení a instalace

Before beginning, ensure you have the necessary tools: a screwdriver, wire strippers, and a voltage tester. Always confirm the power is off at the circuit breaker before touching any wires.

5.1. Kroky před instalací

1. Vypnout napájení: Locate the circuit breaker controlling the light switch you intend to replace and turn it off. For safety, consider turning off the main power to your home if unsure.
2. Odebrat čelní panel: Carefully remove the existing light switch faceplate.
3. Test napájení: Použijte svtage tester to confirm that there is no power to any of the wires in the electrical box, including the neutral wire.
4. Zapojení fotografií: Take a clear photo of the current wiring configuration before disconnecting any wires. This will serve as a reference if you need to revert the setup.
5. Identify Line Wire: The line wire (hot wire) typically carries continuous power. It is usually black and connected to a black screw on the existing switch. Use the provided black tape to label this wire.
6. Identify Neutral Wire: The neutral wire (usually white) is essential for the WeMo Smart Light Switch. Ensure a neutral wire is present in your electrical box.

5.2. Wiring the WeMo Smart Light Switch

The WeMo Smart Light Switch is compatible with both single-pole and 3-way circuits. The instructions below cover the general wiring process.

1. Odpojení starého spínače: Carefully disconnect all wires from your existing light switch. Straighten any bent wire ends.
2. Connect Line Wire: Connect the black wire from the WeMo Smart Light Switch to the labeled line wire (the one with black tape) from your electrical box using a wire nut.
3. Connect Traveler Wires (for 3-way setup): Connect the red and blue wires from the WeMo Smart Light Switch to the corresponding traveler wires from your electrical box using wire nuts.
4. Připojení nulového vodiče: Connect the white wire from the WeMo Smart Light Switch to the neutral wire bundle (usually white wires twisted together) in your electrical box using a wire nut.
5. Připojte zemnící vodič: Connect the green wire from the WeMo Smart Light Switch to the bare copper or green ground wire in your electrical box using a wire nut.
6. Zabezpečená připojení: Gently tug on each wire nut to ensure all connections are secure.

5.3. Kroky po instalaci

1. Test funkčnosti: Before fully installing the switch into the wall box, turn the power back on at the circuit breaker. Test the switch to ensure it powers the lights on and off correctly.
2. Instalace přepínače: Once confirmed working, turn off the power at the circuit breaker again. Carefully push the wires back into the electrical box, then secure the WeMo Smart Light Switch into the wall box with screws.
3. Připevněte čelní panel: Secure the new faceplate over the installed switch.
4. Obnovit napájení: Znovu zapněte napájení na jističi.

5.4. Advanced 3-Way/4-Way Configuration Note

While the WeMo Light Switch cannot directly replace a 4-way switch, it can be integrated into a 4-way circuit. In a typical 4-way setup (three switches controlling one light), there are two 3-way switches and one 4-way switch. You can replace one of the 3-way switches in this configuration with a WeMo Smart Light Switch to make the entire circuit smart. This requires identifying the correct 3-way switch that has a neutral wire in its box. You may need to open multiple switch boxes to find the appropriate 3-way switch with a neutral wire.

6. Návod k obsluze

6.1. WeMo App Control

1. Stáhnout aplikaci: Download the free WeMo App from your device's app store (Apple App Store or Google Play Store).
2. Vytvořit účet: Follow the in-app instructions to create a WeMo account.
3. Přidat zařízení: Select 'Add a WeMo' and follow the prompts to connect your new Smart Light Switch to your home Wi-Fi network.
4. Aktualizace firmware: Check for and install any available firmware updates within the WeMo App to ensure optimal performance and access to the latest features.
5. Plánování a časovače: Use the WeMo App to set automatic schedules for your lights (e.g., turn off at sunrise, synchronize with sunset) and create custom timers.

6.2. Integrace hlasového ovládání

The WeMo Smart Light Switch is compatible with Apple HomeKit, Amazon Alexa, and Google Assistant for hands-free control.

1. Apple HomeKit: Open the Home app on your Apple device. Select 'Add Accessory' and scan the HomeKit setup code located on the switch or its packaging. Follow the on-screen instructions to complete the setup.
2. Amazon Alexa: Open the Amazon Alexa app. Go to 'Skills & Games', search for 'WeMo', and enable the skill. Link your WeMo account when prompted. Once linked, Alexa will discover your WeMo devices.
3. Asistent Google: Open the Google Home app. Go to 'Set up device' or 'Works with Google', search for 'WeMo', and link your WeMo account. Your WeMo devices will then appear in the Google Home app.

7. Údržba

• Čištění: Use a soft, dry cloth to clean the surface of the switch. Do not use abrasive cleaners or solvents.
• Aktualizace firmwaru: Regularly check the WeMo App for firmware updates. Updates often include performance improvements, bug fixes, and new features.
• Power Cycling: Pokud spínač přestane reagovat, zkuste na 10 sekund vypnout napájení jističem a poté jej znovu zapnout.

8. Řešení problémů

• Přepínač nereaguje: Ensure the circuit breaker is on. Check the indicator light on the switch; if it's off, there might be a power issue or a loose connection. Re-verify wiring if necessary (with power off).
• Problémy s připojením aplikace: Ensure your Wi-Fi network is active and the switch is within range. Try restarting your Wi-Fi router. If issues persist, try resetting the switch (refer to the WeMo App for specific reset instructions) and re-adding it.
• Hlasové ovládání nefunguje: Verify that your WeMo account is correctly linked in the respective smart assistant app (Alexa, Google Home, Apple Home). Ensure your smart assistant device is online and properly configured.
• Neutral Wire Requirement: As noted in the safety section, a neutral wire is mandatory. If your installation location lacks a neutral wire, the WeMo Smart Light Switch will not function.

9. Záruka a podpora

Pro informace o záruce, technickou podporu nebo další pomoc navštivte oficiální stránky podpory WeMo. webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.