Audio-Technica AT-LP60XHP Turntable & Headphone Bundle

Zavedení

The Audio-Technica AT-LP60XHP is a fully automatic belt-drive turntable and headphone combination designed for enjoying 33-1/3 and 45 RPM vinyl records. This bundle includes an integrated headphone amplifier with a 3.5 mm (1/8") headphone jack and volume control, allowing for direct listening with the included ATH-250AV over-ear headphones or other compatible headphones. The turntable can also be connected to external audio systems via its detachable RCA output cable and built-in switchable phono preamp.

Mezi klíčové vlastnosti patří:

• High-fidelity audio reproduction from vinyl records.
• Fully automatic belt-drive operation with two selectable speeds: 33-1/3 and 45 RPM.
• Integrovaná sluchátka amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control.
• Included ATH-250AV over-ear headphones with 40 mm drivers and a 3.5 m (11.5') cable.
• Anti-resonance die-cast aluminum platter for stable playback.
• Redesigned tonearm base and headshell for improved tracking and reduced resonance.
• External AC adapter to minimize noise interference in the signal chain.

Co je v krabici

Ověřte, zda balení obsahuje všechny následující položky:

• AT-LP60XHP Turntable Unit
• ATH-250AV Over-Ear Headphones
• Detachable RCA Output Cable (3.5 mm male to dual RCA male)
• Adaptér 45 RPM
• Removable Hinged Dust Cover
• AC Adapter (External)

Konec produktuview

Familiarize yourself with the components and controls of your AT-LP60XHP turntable.

Figure 1: Audio-Technica AT-LP60XHP Turntable with ATH-250AV Headphones.

The turntable features a sleek design with clearly labeled controls for ease of use. The main unit houses the platter, tonearm, and control buttons, while the included headphones provide a direct listening experience.

Obrázek 2: Shora dolů view highlighting turntable controls and tonearm.

Ovládání:

• Volič rychlosti: Switch between 33-1/3 RPM and 45 RPM.
• Tlačítko Start: Initiates automatic playback, moving the tonearm to the record and lowering the stylus.
• Tlačítko Stop: Halts playback, lifts the stylus, and returns the tonearm to its rest position.
• Tonearm Lift/Lower Button: Manually raises or lowers the tonearm.
• Konektor pro sluchátka (3.5 mm): Připojte sluchátka pro soukromý poslech.
• Ovládání hlasitosti sluchátek: Adjusts the volume for connected headphones.

Nastavení

1. Rozbalit: Opatrně vyjměte všechny součásti z obalu. Obal uschovejte pro budoucí přepravu nebo skladování.
2. Place Turntable: Umístěte otočný talíř na stabilní, rovný povrch mimo dosah přímého slunečního záření, zdrojů tepla a nadměrných vibrací.
3. Install Platter: Place the die-cast aluminum platter onto the turntable spindle. Ensure it sits correctly.
4. Instalace hnacího řemene: Carefully attach the drive belt to the motor pulley and the inner rim of the platter according to the diagram in the quick start guide (not provided here).
5. Instalace krytu proti prachu: Attach the hinged dust cover to the rear hinges of the turntable.
6. Připojte napájení: Connect the AC adapter to the DC IN 12V port on the rear of the turntable, then plug the adapter into a wall outlet.
7. Připojení sluchátek: Plug the ATH-250AV headphones (or your preferred headphones) into the 3.5 mm headphone jack on the front panel.
8. Externí audio připojení (volitelné): Pokud se připojujete k externímu amplifier or powered speakers, use the detachable RCA output cable. Ensure the PHONO/LINE switch on the rear is set appropriately (PHONO for phono input, LINE for line input).

Návod k obsluze

Follow these steps to play your vinyl records:

1. Záznam o místě: Carefully place a vinyl record on the platter. If playing a 7-inch record, place the 45 RPM adapter on the center spindle.
2. Vyberte rychlost: Set the speed selector switch to either 33-1/3 RPM or 45 RPM, matching the speed of your record.
3. Spustit přehrávání: Stiskněte tlačítko START button. The tonearm will automatically move to the lead-in groove of the record and gently lower the stylus.
4. Upravit hlasitost: If using headphones, adjust the headphone volume control to your desired listening level. If connected to an external system, adjust the volume on that system.
5. Zastavit přehrávání: Přehrávání zastavíte stisknutím tlačítka ZASTÁVKA button. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
6. Manual Tonearm Operation (for 10-inch records or specific track selection): For 10-inch records, you may need to manually position the tonearm. Use the tonearm lift/lower button to raise the tonearm, manually move it over the desired track, then lower it.

Spojení

The AT-LP60XHP offers flexible connection options:

• RCA výstup: Use the included detachable 3.5 mm male to dual RCA male cable to connect the turntable to an ampzesilovač, přijímač nebo aktivní reproduktory.
• Přepínač Phono/Line: Located on the rear panel, this switch allows you to select between PHONO output (for connecting to an amplifier with a dedicated phono input) or LINE output (for connecting to a line-level input on an amplifier or powered speakers without a phono input).
• Sluchátkový výstup: The integrated 3.5 mm (1/8") headphone jack on the front panel provides direct audio output for headphones.

Údržba

Proper maintenance ensures the longevity and optimal performance of your turntable:

• Protiprachový kryt: Always keep the hinged dust cover closed when the turntable is not in use to protect it from dust and debris.
• Čištění: Use a soft, dry cloth to clean the turntable chassis and dust cover. Avoid harsh chemicals or abrasive cleaners.
• Péče o stylus: Stylus pravidelně jemně čistěte měkkým kartáčkem určeným k čištění stylusu, a to kartáčováním zezadu dopředu.
• Výměna stylusu: The Dual Magnet cartridge features a replaceable stylus. Replace the stylus when you notice a decrease in sound quality or after approximately 300-500 hours of playback. Refer to the Audio-Technica website or your local dealer for replacement styli.

Odstraňování problémů

If you encounter issues with your turntable, consult the following common troubleshooting tips:

• Bez napájení: Ensure the AC adapter is securely connected to the turntable and a working power outlet.
• Žádný zvuk: Check all audio cable connections. Verify the PHONO/LINE switch is set correctly for your amplifier/speaker input. Ensure headphone volume is turned up if using headphones.
• Skipping/Distorted Sound: Ensure the record is clean and free of dust. Verify the turntable is on a stable, level surface. Check the stylus for damage or wear; replace if necessary.
• Talíř se netočí: Check the drive belt to ensure it is correctly seated on the motor pulley and platter rim.

For further assistance, please contact Audio-Technica customer support.

Specifikace

Záruka a podpora

Audio-Technica products are manufactured to high quality standards and are warranted against defects in materials and workmanship. For specific warranty terms, registration, and support information, please refer to the warranty card included with your product or visit the official Audio-Technica webmísto.

For technical assistance, troubleshooting, or service inquiries, please contact Audio-Technica customer support through their webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.