Perlegear TV Wall Mount PGXSF1 Instruction Manual

1. Úvod

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

2. Konec produktuview

The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.

Klíčové vlastnosti:

• Kompatibilita velikosti obrazovky: Fits most 10 to 32-inch televisions.
• Nosnost: Supports TVs up to 20 kg (44 lbs).
• Kompatibilita VESA: 50x50mm, 75x75mm, 100x100mm.
• Hnutí:
  • Tilt: +5° to -15°
  • Otočení: +/- 90°
  • Otočení: 360°
• Rozšíření: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
• Materiál: High-grade alloy steel construction.

Obrázek 2.1: Hlavní view of the Perlegear PGXSF1 TV Wall Mount.

Obrázek 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).

Obrázek 2.3: The mount is tested to support up to 20 kg (44 lbs).

3. Bezpečnostní informace

VAROVÁNÍ: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Nezačínejte s instalací, dokud si nepřečtete a neporozumíte všem pokynům a varováním obsaženým v této příručce.
• Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a televizoru.
• This product is designed for installation on wood studs, solid concrete, or brick walls. NEMONTUJTE pouze na sádrokarton.
• Use only the hardware provided or specified by Perlegear.
• Pokud máte jakékoli pochybnosti o procesu instalace, poraďte se s kvalifikovaným odborníkem.
• Během instalace držte děti a domácí zvířata mimo dosah.
• Pravidelně kontrolujte, zda je držák bezpečně upevněn a zda jsou všechny upevňovací prvky pevně utažené.

4. Obsah balení

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

• 1x TV Wall Mount Assembly (Wall Plate and Arm)
• 2x Wall / Lag Screws
• 2x Wall Screw Washers
• 2x Concrete Anchors (Rawl Plugs)
• 4x M4 Screws (16mm length)
• 4x M4 Screws (30mm length)
• 4x M6 Screws (16mm length)
• 4x M6 Screws (30mm length)
• 4x Spacers (10mm thickness)
• 8x Spacers (5mm thickness)
• 4x Silver Double Washers
• Návod k použití

5. Nastavení a instalace

Pro bezpečnou instalaci pečlivě dodržujte tyto kroky.

5.1 Kontroly před instalací:

1. Ověření kompatibility televizoru: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
2. Identifikujte typ stěny: Zjistěte, zda je vaše zeď z dřevěných trámů, plného betonu nebo cihly. Neinstalujte pouze na sádrokarton.
3. Sbírejte nástroje: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.

5.2 Wall Plate Installation:

1. Místo vrtání Mark: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
2. Vrtací pilotní otvory:
   • Pro dřevěné sloupky: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
   • Pro betonové/cihlové zdi: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
3. Připevnění nástěnné desky: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.

5.3 Attaching TV to Mount:

1. Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
2. Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.

6. Návod k obsluze

Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your viewzkušenosti.

Adjusting the TV Position:

• Prodloužení a zatažení: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
• Otočný: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.

Obrázek 6.1: Swivel the TV left or right for optimal viewIng.
• Náklon: Upravte svislost viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.


Obrázek 6.2: Tilt the TV up or down to reduce glare or adjust viewing výška.

• Otáčení: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.


Obrázek 6.3: Rotate the TV 360 degrees for flexible orientation.

7. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

• Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pravidelné kontroly: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
• Mazání: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.

8. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

Issue: Mount movement (swivel/tilt) is stiff.

Řešení: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.

Problém: Televizor není po instalaci v rovině.

Řešení: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.

Issue: Screws do not fit my TV.

Řešení: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.

9. Specifikace

10. Záruka a podpora

This Perlegear TV Wall Mount PGXSF1 comes with a 10letá záruka výrobce.

For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear webstránky s nejaktuálnějšími kontaktními informacemi.

Please have your model number (PGXSF1) and purchase information ready when contacting support.