Marshall SV20H Studio Vintage 20/5-watt Tube Head

Zavedení

The Marshall SV20H Studio Vintage 20/5-watt Tube Head is a compact yet powerful amplifier designed to deliver the iconic "Plexi" tone. This amplifier head is a versatile tool for guitarists seeking classic British rock sounds, offering both 20-watt and 5-watt power modes for various playing environments, from studio recording to live performances. It features a 1-channel design with four inputs, high/low sensitivity loudness controls, an effects loop, and a power reduction circuit, providing flexibility and authentic vintage zvuk.

Bezpečnostní informace

Před použitím si prosím přečtěte a pochopte všechny bezpečnostní pokyny amplifier. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Zdroj napájení: Připojte amplifier only to a power supply of the type described in this manual and marked on the unit. Ensure the power cord is not damaged and is properly grounded.
• Větrání: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Adequate airflow is essential to prevent overheating.
• Voda a vlhkost: Do not expose this apparatus to rain or moisture. Do not use near water or in wet locations.
• Teplo: Neinstalujte v blízkosti zdrojů tepla, jako jsou radiátory, tepelné regulátory, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
• Servis: Nepokoušejte se tento výrobek opravovat sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu. Servis je nutný, pokud je zařízení jakkoli poškozeno, například je poškozen napájecí kabel nebo zástrčka, do zařízení se dostala tekutina nebo do něj spadly nějaké předměty, zařízení bylo vystaveno dešti nebo vlhkosti, nefunguje normálně nebo upadlo.
• Trubky: Trubice amplifiers contain vacuum tubes that operate at high temperatures and high voltages. Exercise extreme caution when handling or replacing tubes. Allow the amplifier to cool down completely before attempting any tube maintenance.
• Vysoká hlasitost: Prolonged exposure to high volume levels can cause permanent hearing damage. Use caution when setting volume levels.

Začínáme

Upon receiving your Marshall SV20H, carefully unpack the amplifier from its packaging. Retain all packaging materials for future transport or storage. Inspect the amplifier for any signs of damage that may have occurred during shipping. If any damage is found, contact your retailer immediately.

Před připojením amplifier, ensure it is placed on a stable, level surface with adequate ventilation around all sides.

Nastavení

Follow these steps to set up your SV20H amplifier head:

1. Connect Speaker Cabinet: Using a high-quality speaker cable (not a guitar cable), connect the appropriate speaker output on the rear of the SV20H to your speaker cabinet. Ensure the impedance of the speaker cabinet matches the selected output on the amplifier (e.g., 8 Ohm output to an 8 Ohm cabinet). Nikdy neprovozujte amplifier without a speaker load connected.
2. Připojte napájení: Zajistěte amplifier's power switch is in the 'OFF' position. Connect the supplied power cord to the IEC inlet on the rear of the amplifier and then to a grounded electrical outlet.
3. Připojit nástroj: Plug your guitar into one of the input jacks on the front panel. The SV20H features four inputs: two for High Sensitivity (Loudness 1) and two for Low Sensitivity (Loudness 2). Experiment to find the input that best suits your guitar and desired tone.

Figure 1: Front panel of the Marshall SV20H amplifier head, displaying the various controls and input jacks.

Obsluha Ampdoživotní

The SV20H offers intuitive controls for shaping your sound:

• Power Switch (MAINS): Otočí amplifier on and off. Always turn the amplifier on with the MAINS switch first, then the STANDBY switch (if applicable, though this model typically has a single power switch).
• Loudness 1 (High Sensitivity): Controls the volume of the high-sensitivity input. This input provides more gain and is ideal for achieving classic rock crunch and lead tones.
• Loudness 2 (Low Sensitivity): Controls the volume of the low-sensitivity input. This input offers cleaner tones with less gain, suitable for jazz, blues, or when using high-output pickups.
• Přítomnost: Adjusts the amount of high-frequency feedback in the power amplifier section, adding sparkle and definition to your tone.
• Basy, středy, výšky: Standard three-band equalizer controls to shape the low, mid, and high frequencies of your guitar tone.
• Power Reduction Circuit: The SV20H features a power reduction switch (often labeled 20W/5W or similar) allowing you to switch between full 20-watt output and a lower 5-watt output. This is useful for achieving cranked tube tones at lower volumes.
• Smyčka efektů: The series effects loop (SEND/RETURN jacks on the rear panel) allows you to integrate external effects pedals (e.g., delay, reverb, modulation) into the amplifier's signal path after the preamp section. Connect the SEND to your pedal's input and the pedal's output to the RETURN.

Zahřívání a ochlazení: Povolit amplifier a few minutes to warm up after turning it on before playing. Similarly, allow it to cool down for a few minutes after turning it off before moving it.

Údržba

Proper maintenance will ensure the longevity and optimal performance of your SV20H ampživější:

• Čištění: Odpojte amplifier from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or waxes.
• Výměna trubek: Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. Refer to a qualified technician for tube replacement, as this involves high voltages.
• Skladování: Pokud se přístroj delší dobu nepoužívá, uložte jej amplifier in a cool, dry place, ideally in its original packaging or a protective cover.
• Přeprava: Always disconnect all cables and allow the amplifier to cool down before transporting. Use appropriate cases or covers to protect the unit from physical damage.

Odstraňování problémů

If you encounter issues with your SV20H, try these common troubleshooting steps:

Pokud problém přetrvává i po vyzkoušení těchto řešení, obraťte se na kvalifikovaný servisní personál.

Specifikace

Figure 2: Dimensions of the Marshall SV20H amphlava lifikátoru.

Záruka a podpora

For information regarding warranty coverage and terms for your Marshall SV20H amplifier, please refer to the warranty card included with your product or visit the official Marshall Ampzvedání webUschovejte si doklad o koupi pro případ reklamace.

For technical support, service inquiries, or to locate an authorized service center, please contact Marshall Amplification customer support through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.

Oficiální Marshall Webmísto: www.marshall.com