Návod k obsluze integrální motocyklové helmy Shoei GT-Air II

Zavedení

This manual provides essential information for the proper use, maintenance, and care of your Shoei GT-Air II Full Face Motorcycle Helmet. Please read it thoroughly before using your helmet to ensure maximum safety and performance. The Shoei GT-Air II is engineered for advanced aerodynamics, noise reduction, and comfort, designed to enhance your riding experience.

Obrázek: Přední strana view of the Shoei GT-Air II Full Face Motorcycle Helmet in matte black, showcasing its sleek design and clear visor.

Klíčové vlastnosti

• Advanced Aerodynamics and Noise Reduction: Designed with an aerodynamic shell and cutting-edge noise reduction technology for a smooth and quiet ride.
• Optimal Sun Glare Protection: Equipped with the QSV-2 Sun Shield System, offering a lengthened internal sun shield for clear vision and enhanced safety.
• Superior Ventilation System: Features three intake and five exhaust vents for exceptional airflow, keeping you cool and comfortable.
• Enhanced Comfort and Fit: Multi-Ply Matrix AIM Shell construction and 3D Max-Dry System II Interior provide a snug, moisture-wicking fit.
• Bluetooth Communication Ready: Compatible with the SENA SRL2 Bluetooth Communication System for seamless integration and on-road communication.

Nastavení a montáž

1. Proper Fitment

A helmet must fit snugly to provide optimal protection. To determine the correct size, measure your head circumference and refer to the size guide. The helmet should feel tight but comfortable, without excessive pressure points. It should not move freely when you shake your head.

2. Nastavení podbradního pásku

The GT-Air II features a micro ratchet chin strap for secure and easy adjustments. To fasten, insert the ratchet strap into the buckle until it clicks securely. To release, pull the red tab to disengage the ratchet mechanism.

Obrázek: Podrobný view of the micro ratchet chin strap, highlighting the red release tab and the secure locking mechanism.

3. Sena SRL2 Bluetooth Communication System Integration

The helmet is designed for seamless integration with the optional SENA SRL2 Bluetooth Communication System. Follow the instructions provided with your SENA SRL2 unit for installation into the designated cavities within the helmet.

Obrázek: Rentgenový snímek view of the Shoei GT-Air II helmet illustrating the internal placement of the SENA SRL2 Bluetooth communication system components.

Operating Your Helmet

1. Visor Operation (CNS-1 Shield)

The clear CNS-1 shield is fog-resistant and provides excellent optical clarity. It can be easily opened and closed using the tab located at the bottom center. For advanced venting and defogging, the visor can be set to a "first position opening" which creates a small gap for airflow.

Obrázek: Boční view of the Shoei GT-Air II helmet in matte black, showing the clear CNS-1 visor in a slightly open position.

2. Internal Sun Shield (QSV-2)

The QSV-2 internal sun shield protects against sun glare. It is operated by a slider mechanism on the left side of the helmet. The QSV-2 is designed to be 5mm longer than its predecessor (QSV-1) for improved coverage.

Image: A cutaway diagram of the Shoei GT-Air II helmet showing the QSV-2 internal sun shield extended, highlighting its increased length compared to the previous model.

3. Větrací systém

The GT-Air II features an advanced ventilation system with three air intakes and five exhaust outlets. These vents can be adjusted to control airflow and maintain comfort during your ride.

Image: An animated diagram illustrating the path of airflow through the helmet's intake and exhaust vents, demonstrating optimal ventilation.

Údržba a péče

• Shell Cleaning: Use a soft cloth and mild soap with water. Avoid harsh chemicals or abrasive cleaners.
• Čištění zorníku: Očistěte clonu měkkým hadříkemamp cloth and mild soap. Do not use abrasive materials.
• Čištění interiéru: The 3D Max-Dry System II Interior is removable and washable. Carefully remove the padding and wash according to the care label instructions. Ensure all parts are completely dry before reinstallation.
• Skladování: Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided helmet bag for protection.

Odstraňování problémů

• Zamlžování hledí: Ensure the visor is properly closed or utilize the "first position opening" for increased airflow. The Pinlock EVO Lens (included) can be installed for enhanced fog resistance.
• Volný střih: If the helmet feels loose over time, inspect the interior padding for wear. Replacement cheek pads and center pads are available to restore a snug fit.
• Problémy s hlukem: Verify all vents are closed if noise is excessive. Ensure the visor is fully sealed. The GT-Air II is designed for advanced noise reduction, but external factors can influence perceived noise levels.

Specifikace

Informace o záruce

Your SHOEI helmet is covered under warranty for five years from the purchase date, or seven years from the date of manufacture (whichever comes first). The warranty covers all manufacturing defects. Please note that damage caused by the consumer (e.g., dropping the helmet) is not covered under warranty.

Produktová videa