Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

1. Úvod

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

Bezpečnostní informace

• Před instalací nebo servisem vždy vypněte napájení jističem.
• Instalaci by měl provádět kvalifikovaný elektrikář nebo osoba obeznámená s konstrukcí a provozem výrobku a s riziky, která s ním souvisejí.
• Ujistěte se, že všechna elektrická připojení splňují místní předpisy a vyhlášky.
• Neinstalujte na povrchy, které nejsou konstrukčně pevné.
• Avoid looking directly into the LED light source when illuminated.

2. Vlastnosti produktu

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

• Vysoký jas a energetická účinnost: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
• Tři režimy svícení: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
• Adjustable Motion Sensor: 180-degree swiveling angle with a detection distance of up to 75 feet.
• Odolné a odolné vůči povětrnostním vlivům: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
• Nastavitelné světelné hlavy: Three independently adjustable light heads allow for broad and customized light coverage.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Amico 3 Head LED Security Light Unit
• Montážní konzola
• Montážní šrouby
• Drátěné matice
• EVA Pad (for waterproofing)
• Návod k použití

4. Pokyny k instalaci

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

1. Připravte montážní povrch: Ensure the junction box is securely installed and accessible.
2. Instalace montážního držáku: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
4. Kabelová připojení: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
   • Green wire (from light) to Green wire (ground from junction box)
   • Black wire (from light) to Black wire (hot from junction box)
   • White wire (from light) to White wire (neutral from junction box)

   Note: Improper wiring may cause the light to be slightly bright even when off.
5. Montáž svítidla: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
7. Nastavení světelných hlavic a senzoru: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.

Instalační video průvodce

5. Provozní režimy

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

Nastavení režimu:

• Režim detekce pohybu: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
• Režim od soumraku do úsvitu (D2D): The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
• Vždy zapnutý režim: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.

Operating Modes Video Guide

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your security light.

• Čištění: Pravidelně čistěte hlavy světel a čočku pohybového senzoru měkkým hadříkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Inspekce: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
• Environmentální faktory: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.

7. Řešení problémů

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

8. Specifikace

9. Informace o záruce

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. Zákaznická podpora

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico webwebu nebo kontaktních informací uvedených na obalu produktu.