Veanic Replacement Joystick Analog Thumb Stick Repair Kit for Nintendo Switch Joy-Con Controllers - Instruction Manual

1. Konec produktuview

The Veanic 2-Pack Replacement Joystick Analog Thumb Stick Repair Kit is designed to address common issues such as drift, stuttering, blind spots, dead zones, and non-centered problems in Nintendo Switch, Switch OLED Model, and Switch Lite Joy-Con controllers. This kit provides the necessary components and tools to restore your controller's functionality.

2. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 2 x Replacement Joystick for Switch Joy-Con
• 4 x Replacement "Y" Screws
• 1 x "Y1.5" Screwdriver
• 1 x "+1.5" Cross Screwdriver
• 1 x pinzeta
• 2 x Py Tools

Image: The complete Veanic repair kit, showing two replacement joysticks, four replacement 'Y' screws, a Y1.5 screwdriver, a +1.5 cross screwdriver, tweezers, and two pry tools.

3. Kompatibilita

This replacement joystick kit is compatible with the following Nintendo Switch Joy-Con controller models:

• Nintendo Switch (2017 Release)
• Nintendo Switch Lite (2019 Release)
• Nintendo Switch OLED Model (2021 Release)

Image: A visual representation of the replacement joystick's compatibility with Nintendo Switch (2017), Nintendo Switch Lite, and Nintendo Switch OLED models, indicating it works for both left and right Joy-Con controllers.

4. Pokyny k instalaci

Důležité: Proceed with caution. Disassembling electronic devices carries risks. If you are unsure, seek professional assistance. It is recommended to watch a video tutorial before beginning the repair process.

1. Remove Back Screws: Use the Y1.5 screwdriver to remove the four screws on the back of the Joy-Con.
2. Otevřete Casing: Use a pry tool to carefully remove the back cover of the casing.
3. Vyjměte baterii: Gently use a pry tool to remove the battery from its case. Be aware that it may be lightly glued in place.
4. Remove Battery Tray Screws: Using the +1.5 screwdriver, remove the five screws holding the battery tray in place.
5. Set Aside Battery Tray: Gently set aside the battery tray so it is not in the way.
6. Locate Ribbon Cable: Directly below the metal joystick casing, there is a ribbon cable. Gently lift the clip holding the ribbon cable in place.
7. Detach Ribbon Cable: Gently detach the ribbon cable.
8. Lift Ribbon Cable Clip: Gently lift the clip holding the ribbon cable for the joystick in place.
9. Remove Joystick Ribbon Cable: Gently remove the joystick ribbon cable.
10. Remove Joystick Screws: Using the +1.5 screwdriver, remove the two screws holding the joystick in place.
11. Replace Joystick: Lift out your old joystick and set the new one in its place.
12. Replace Joystick Screws: Replace the two screws which hold the joystick in place.
13. Reattach Ribbon Cable (Joystick): Gently reattach the ribbon cable for the joystick.
14. Flip Ribbon Cable Clip: Gently flip the clip for the ribbon cable back down.
15. Reattach Ribbon Cable (Below Joystick): Gently reattach the ribbon cable below the joystick.
16. Flip Ribbon Cable Clip: Gently flip the clip for the ribbon cable back down.
17. Replace Battery Tray: Replace the battery tray and the five screws which hold it in place.
18. Zavřít Casing: Place the battery back and the back cover for the Joy-Con, then replace the four screws.

Image: Steps 1-6 of the Joy-Con disassembly process, illustrating how to remove the back screws, open the casing, remove the battery, and access internal components.

Image: Steps 7-12 of the joystick replacement process, detailing the detachment of ribbon cables, removal of the old joystick, and installation of the new one.

Image: Steps 13-18 of the Joy-Con reassembly process, showing how to reattach ribbon cables, replace the battery tray, and secure the back cover.

5. Operating Instructions: Joystick Calibration

After installing the new joystick, it is crucial to calibrate it using the Nintendo Switch settings to ensure proper functionality and prevent drift. Follow these steps:

1. Connect the reassembled Joy-Con to your Nintendo Switch.
2. Navigate to the System Settings on your Nintendo Switch.
3. Scroll down and select "Controllers and Sensors."
4. Select "Calibrate Control Sticks."
5. Follow the on-screen instructions to calibrate the new joystick. This typically involves moving the stick in full circles and pressing it down.
6. If the stick is not working as expected after calibration, you may need to power cycle your Switch by holding down the power button for 10-15 seconds until it turns off, then turning it back on.

6. Údržba

To ensure the longevity of your replacement joysticks and Joy-Con controller:

• Avoid excessive force or aggressive movements on the joysticks.
• Udržujte ovladač čistý a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
• Store the controller in a safe place to prevent accidental damage.

7. Řešení problémů

Pokud se po instalaci setkáte s problémy, zvažte následující:

• Joystick Drift or Non-Centering: Ensure you have performed the calibration steps outlined in Section 5. If the issue persists, try recalibrating or power cycling your Nintendo Switch.
• Tlačítka nereagují: Double-check all ribbon cable connections during reassembly. Ensure they are securely seated and the clips are properly closed.
• Screws Stripped: The kit includes replacement "Y" screws. Exercise caution and use appropriate pressure when tightening screws to avoid stripping.

8. Specifikace

9. Záruka a podpora

Veanic stands behind its products. If you are not satisfied with your purchase within 90 days, please contact us directly. We are committed to providing support and will respond to inquiries within 24 hours.

Pro další pomoc prosím navštivte Veanic Store on Amazon.