Lenco LBT-188 Bluetooth Turntable

Zavedení

Thank you for choosing the Lenco LBT-188 Bluetooth Turntable. This high-quality belt-drive turntable is designed to provide an excellent vinyl listening experience with modern conveniences. It features two selectable speeds (33 and 45 RPM), an anti-skating mechanism, a built-in pre-amplifier, and a USB port for digitizing your vinyl collection to MP3. Additionally, its integrated Bluetooth transmission allows for wireless audio streaming to compatible speakers or headphones.

This manual provides detailed instructions for setting up, operating, and maintaining your LBT-188 turntable to ensure optimal performance and longevity.

Obsah balení

• Lenco LBT-188 Turntable Unit
• Prachový kryt
• Talíř
• Plstěná podložka
• Protiváha
• Hmotnost proti bruslení
• AC Power Adapter (CE-UK)
• USB kabel
• Audio kabel RCA
• Návod k použití

Nastavení

1. Vybalení a umístění

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

Figure 1: Lenco LBT-188 Turntable with dust cover closed, ready for placement.

2. Instalace talíře a pásu

1. Gently place the platter onto the center spindle.
2. Locate the drive belt underneath the platter. Stretch the belt around the motor pulley.
3. Umístěte plstěnou podložku na horní část talíře.

3. Tonearm Assembly and Balance

1. Attach the counterweight to the rear of the tonearm. Rotate it clockwise until it is fully threaded.
2. Carefully remove the stylus protector from the cartridge.
3. Uvolněte třamp. Adjust the counterweight by rotating it until the tonearm is perfectly balanced and floats horizontally.
4. Once balanced, hold the counterweight steady and rotate the tracking force ring to "0".
5. Rotate the entire counterweight counter-clockwise to set the recommended tracking force (typically 2.0g for the AT3600 cartridge). Refer to the cartridge manufacturer's specifications for precise values.

Figure 2: Close-up of the tonearm assembly, showing the counterweight and anti-skating wire.

4. Nastavení proti kluzání

Attach the small loop of the anti-skating weight string to the anti-skating post. The weight should hang freely. This helps prevent the stylus from skipping inwards across the record.

5. Connecting to Audio System

The LBT-188 has a built-in switchable pre-amplifier. You can connect it to an amplifier's PHONO input (if the pre-amp is OFF) or to an AUX/LINE input (if the pre-amp je ZAPNUTO).

• Connect the RCA audio cables from the turntable's RCA output jacks (red for right, white for left) to the corresponding input jacks on your ampzesilovač nebo aktivní reproduktory.
• Ensure the PHONO/LINE switch on the back of the turntable is set correctly based on your ampvstup od lifiera.

Figure 3: Rear panel connections including RCA outputs, USB port, and power input.

6. Připojení napájení

Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug the adapter into a wall outlet.

Návod k obsluze

1. Zapnutí/vypnutí

Use the ON/OFF switch located on the rear panel to power the turntable on or off.

2. Přehrávání nahrávky

1. Umístěte desku na talíř.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector knob.
3. Odemkněte raménko přenoskyamp.
4. Zvedněte raménko přenosky pomocí páčky pro nastavení tónu.
5. Umístěte raménko přenosky nad požadovanou počáteční drážku desky.
6. Jemně spusťte raménko přenosky pomocí páčky pro přehrávání. Jehla se dotkne desky a spustí se přehrávání.
7. To stop playback, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the clamp.

Figure 4: A hand carefully positioning the tonearm over a record.

Figure 5: The stylus tracking a groove on a vinyl record during playback.

3. Bluetooth Transmission

The LBT-188 can stream audio wirelessly to Bluetooth-enabled speakers or headphones.

1. Ensure your Bluetooth receiving device (speaker/headphones) is in pairing mode.
2. With the turntable powered on, press and hold the Bluetooth pairing button (usually indicated by a Bluetooth icon) on the turntable until the indicator light flashes, signifying pairing mode.
3. The turntable will automatically search for and connect to the nearest available Bluetooth device. Once connected, the indicator light will become solid.
4. Begin playing a record, and the audio will be transmitted to your paired Bluetooth device.

Note: Bluetooth connection may be affected by other nearby Bluetooth devices. Ensure your receiving device is close to the turntable during pairing.

4. USB Digitization (Vinyl to MP3)

The integrated USB port allows you to convert your vinyl records into digital MP3 files directly to a computer.

1. Připojte gramofon k počítači pomocí dodaného kabelu USB.
2. Install appropriate audio recording software on your computer (e.g., Audacity, available for free online).
3. Follow the instructions of your chosen software to select the turntable as the input device and begin recording.
4. Play your vinyl record, and the audio will be captured by the software.
5. Save the recorded audio as an MP3 file na vašem počítači.

Údržba

1. Čištění stylusu

Regularly clean the stylus using a soft brush, brushing gently from back to front. A dirty stylus can cause poor sound quality and damage to your records.

2. Cleaning the Turntable Unit and Dust Cover

Wipe the turntable and dust cover with a soft, dry, lint-free cloth. For stubborn marks, use a slightly damp cloth with mild soap, then wipe dry immediately. Avoid abrasive cleaners or solvents.

3. Replacing the Stylus/Cartridge

The stylus (needle) has a limited lifespan and should be replaced after approximately 300-500 hours of playback. Refer to the cartridge manufacturer's instructions for replacement. The LBT-188 typically uses an Audio-Technica AT3600 cartridge.

Odstraňování problémů

Specifikace

Záruka a podpora

This product comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact Lenco customer service through their official website or the retailer where you purchased the product. Do not attempt to repair the unit yourself, as this may void the warranty.