Zavedení
This user manual provides essential information for the installation, operation, maintenance, and troubleshooting of your FCS Complete Strut Assembly. This assembly is designed for specific vehicle applications, including Chevrolet Traverse (2013-2015 Front), Buick Enclave (2013-2015 Front), and GMC Acadia (2013-2015 Front). It is a pre-assembled unit, simplifying the replacement process for your vehicle's suspension system.
For optimal performance and safety, it is highly recommended that installation be performed by a qualified professional.
Konec produktuview
Image: A complete FCS strut assembly, featuring the strut, coil spring, and upper mount. The FCS logo is visible on the strut body.
The FCS Complete Strut Assembly is an all-in-one solution for replacing worn or damaged suspension components. It includes the strut, coil spring, strut mount, boot, and bumper, all pre-assembled for a direct fit and easier installation. This design helps restore original ride height, handling, and braking performance.
Co je v krabici
Each FCS Complete Strut Assembly package typically contains:
- One (1) Pre-assembled Complete Strut Assembly
- Includes: Mount, Bearing, Coil Spring, and Strut Assembly
Please inspect the contents upon arrival to ensure all components are present and undamaged.
Nastavení a instalace
Bezpečnost především: Always wear appropriate personal protective equipment (PPE) including safety glasses and gloves. Ensure the vehicle is securely supported on jack stands on a level surface before beginning any work. Never rely solely on a jack.
Doporučená profesionální instalace: Due to the complexity and safety-critical nature of suspension components, professional installation by a certified mechanic is strongly recommended. Improper installation can lead to vehicle damage, poor handling, and serious injury.
General Installation Steps (Consult a service manual for your specific vehicle model):
- Bezpečně zvedněte a podepřete vozidlo. Sejměte kolo.
- Locate and disconnect any brake lines, ABS sensor wires, or sway bar links attached to the strut assembly.
- Remove the lower mounting bolts connecting the strut to the steering knuckle or control arm.
- Access the upper strut mount bolts, typically located under the hood or inside the trunk. Support the strut assembly while removing these bolts.
- Carefully remove the old strut assembly from the vehicle.
- Install the new FCS Complete Strut Assembly by aligning the upper mounting studs with the vehicle's strut tower and securing them with nuts.
- Align the lower mounting points of the new strut assembly with the steering knuckle or control arm and insert the bolts. Tighten all bolts to the manufacturer's specified torque settings.
- Reconnect any disconnected brake lines, ABS sensor wires, and sway bar links.
- Nasaďte kolo zpět a spusťte vozidlo dolů.
- Perform a wheel alignment after installation to ensure proper vehicle handling and tire wear.
Note: Specific torque specifications and procedures vary by vehicle. Always refer to your vehicle's factory service manual for precise instructions.
Provozní principy
A complete strut assembly is a critical component of your vehicle's suspension system, serving multiple functions:
- Damping: The strut's internal shock absorber dampens spring oscillations, preventing excessive bouncing and maintaining tire contact with the road.
- Podpora: The coil spring supports the weight of the vehicle, maintaining ride height and absorbing road imperfections.
- Strukturální integrita: The strut body often serves as a structural link between the vehicle's chassis and the wheel hub, contributing to steering and alignment.
Properly functioning struts ensure a comfortable ride, stable handling, and effective braking.
Údržba
While complete strut assemblies are largely maintenance-free, periodic inspection is crucial for longevity and safety:
- Vizuální kontrola: Regularly check for signs of fluid leaks from the strut body, damaged or cracked rubber boots, and worn or corroded mounting hardware.
- Kontrola hluku: Listen for unusual noises (clunking, squeaking) coming from the suspension, especially over bumps.
- Opotřebení pneumatik: Uneven tire wear can indicate suspension issues, including worn struts.
- Jízdní kvalita: Noticeable changes in ride comfort, excessive bouncing, or nose-diving during braking can signal worn struts.
Address any issues promptly to prevent further damage to other suspension components and ensure vehicle safety.
Odstraňování problémů
| Příznak | Možná příčina | Řešení |
|---|---|---|
| Excessive Bouncing / Poor Ride Quality | Worn or leaking strut/shock absorber. | Inspect and replace the strut assembly if necessary. |
| Clunking or Rattling Noises | Loose mounting bolts, worn strut mount, or damaged internal components. | Check all mounting bolts for proper torque. Inspect strut mount for wear. Replace assembly if internal damage is suspected. |
| Nerovnoměrné opotřebení pneumatik | Worn suspension components, improper alignment after installation. | Inspect all suspension components. Ensure a proper wheel alignment is performed after installation. |
| Vehicle Pulling to One Side | Damaged strut, improper installation, or alignment issues. | Verify correct installation. Check for damaged components. Perform wheel alignment. |
If you experience any of these symptoms, it is advisable to have your vehicle inspected by a qualified mechanic.
Specifikace
| Atribut | Detail |
|---|---|
| Značka | FCS |
| Číslo modelu | 1333490 |
| Model produktu | Susp Strut Assembly |
| Pozice automatického dílu | Přední |
| Kompatibilní vozidla | Chevrolet Traverse (2013-2015 Front), Buick Enclave (2013-2015 Front), GMC Acadia (2013-2015 Front) |
| Hmotnost položky | 26.5 libry |
| Položka Hmotnost balení | 24.07 lb |
| Rozměry produktu | 28 x 9.1 x 9.1 palce |
| Rozměr balení položky | 27.95" D x 9.06" Š x 9.06" V |
| Země původu | Čína |
| UPC | 724165754010 |
| Vnější povrch | Vymalováno |
| Styl | Moderní |
| Typ služby vozidla | Auto, náklaďák |
Záruka a podpora
For specific warranty information regarding your FCS Complete Strut Assembly, please refer to the documentation included with your purchase or visit the official FCS webZáruční podmínky se mohou lišit.
If you require technical assistance or have questions about your product, please contact FCS customer support through their official channels. You can often find contact information on the manufacturer's website or by searching for "FCS customer support".
For more information about FCS products, you can visit the FCS Store on Amazon.
