1. Bezpečnostní pokyny
Při práci s elektrickým nářadím vždy upřednostňujte bezpečnost. Před použitím si přečtěte a pochopte všechna bezpečnostní varování a pokyny.
- Používejte osobní ochranné prostředky (OOP): Always wear safety glasses, hearing protection, and suitable gloves. A dust mask is recommended for dusty operations.
- Zajištění obrobku: Ensure the workpiece is stable and securely clamped, aby se zabránilo pohybu během provozu.
- Udržujte čistou pracovní plochu: Keep the work area well-lit and free of clutter to prevent accidents.
- Odpojit napájení: Always disconnect the angle grinder from the power supply before making any adjustments, changing accessories, or performing maintenance.
- Use Correct Discs: Only use cutting or grinding discs that are rated for the correct speed and diameter (125 mm) for this tool.
- Vyhněte se překročení: Vždy udržujte správný postoj a rovnováhu.
- Ochrana proti restartu: This tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored. The switch must be manually reset.
2. Konec produktuview
Komponenty
The Einhell Angle Grinder TC-AG 125/1 is designed for versatility in grinding, smoothing, and rust removal tasks.
Obrázek 2.1: Přesview of the Einhell Angle Grinder TC-AG 125/1, showing its compact design with red and black housing, silver gear head, and auxiliary handle.
- Hlavní rukojeť: Ergonomicky tvarované pro pohodlné uchopení.
- Pomocná rukojeť: Can be mounted in two positions for optimal control and ergonomics.
- Zámek vřetena: Facilitates quick and easy disc changes.
- Ochrana disku: Poskytuje ochranu během provozu.
- Metal Gear Head: Robust and flat for flexible applications and durability.
- Vypínač: With restart protection feature.
Obrázek 2.2: Detail view of the angle grinder's main body, highlighting the on/off switch and the robust construction of the gear head.
Obrázek 2.3: Detailní view of the angle grinder's disc attachment area, showing the disc guard and the spindle for mounting cutting or grinding discs.
Klíčové vlastnosti
- Powerful 800-watt motor for efficient operation.
- Maximum speed of 11,000 revolutions per minute.
- Robust, flat metal gear head for flexible applications.
- High user safety thanks to disc protection and restart protection.
- Auxiliary handle can be mounted in two different positions for ergonomic use.
- Spindle lock for easy and convenient tool change.
- Suitable for cutting discs with a diameter of 125 mm.
Ergonomický design pro pohodlnou manipulaci.
Features a flat and robust aluminum gear head.
Designed for easy and convenient disc changes.
Compatible with 125 mm diameter cutting discs.
3. Nastavení
Připevnění přídavné rukojeti
- Ensure the angle grinder is unplugged from the power supply.
- The auxiliary handle can be screwed into either of the two threaded holes on the gear head, depending on your preferred working position and hand dominance.
- Rukojeť pevně utáhněte rukojetí.
Installing/Changing the Cutting Disc
- Ensure the angle grinder is unplugged from the power supply.
- Stiskněte a podržte tlačítko aretace vřetena, abyste zabránili otáčení vřetena.
- Using the provided spanner wrench, loosen and remove the clamping nut (if a disc is already installed).
- Nasaďte opěrnou přírubu na vřeteno.
- Position the new 125 mm cutting or grinding disc onto the backing flange, ensuring it is centered.
- Zašroubujte třamping nut back onto the spindle.
- Press the spindle lock button again and tighten the clamping nut firmly with the spanner wrench.
- Release the spindle lock before operating the tool.
4. Návod k obsluze
Zapnutí/vypnutí
- Zapnout: Push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- Vypnout: For continuous operation, press the rear part of the slide switch to release the lock. For momentary operation, simply release the switch.
- Due to the restart protection, if the power supply is interrupted, the tool will not restart automatically. You must manually reset the switch to the OFF position and then back to ON.
Techniky broušení a řezání
Always ensure proper ventilation and wear appropriate safety gear when operating the angle grinder.
Figure 4.1: A user demonstrating the application of the Einhell Angle Grinder for metal cutting, emphasizing the importance of safety glasses and gloves.
- Broušení: Hold the angle grinder at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
- Řezání: For cutting, hold the angle grinder at a 90-degree angle to the workpiece. Apply light, consistent pressure and allow the disc to do the work. Do not force the tool.
- Směr jiskry: Position yourself and the tool so that sparks are directed away from your body and any flammable materials.
- Přetížení: Nepřetěžujte nářadí. Pokud se motor výrazně zpomalí, snižte tlak.
- Chlazení: Allow the tool to cool down during prolonged use by running it at no load for a short period.
5. Údržba
Regular maintenance ensures the longevity and safe operation of your angle grinder. Always disconnect the tool from the power supply before any maintenance.
- Čištění: Regularly clean the ventilation slots to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or solvents.
- Ochrana disku: Ensure the disc guard is always securely attached and free from damage.
- Uhlíkové kartáče: Check the carbon brushes periodically. If they are worn down, they should be replaced by a qualified technician.
- Napájecí kabel: Inspect the power cord for any signs of damage. Do not use the tool if the cord is damaged.
- Skladování: Úhlovou brusku skladujte na suchém a bezpečném místě mimo dosah dětí.
6. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat při používání úhlové brusky.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nástroj se nespustí | No power supply; Restart protection activated; Damaged power cord/switch | Check power connection; Reset switch (OFF then ON); Inspect cord/switch, seek professional repair if damaged. |
| Nadměrné jiskření u motoru | Opotřebované uhlíkové kartáče; Znečištěný komutátor | Have carbon brushes checked/replaced; Clean commutator (professional service recommended). |
| Nástroj se přehřívá | Blocked ventilation slots; Overloading; Prolonged use | Clean ventilation slots; Reduce pressure/load; Allow tool to cool down. |
| Disk se volně neotáčí | Spindle lock engaged; Disc improperly installed; Damaged disc | Release spindle lock; Reinstall disc correctly; Replace damaged disc. |
7. Technické specifikace
| Specifikace | Hodnota |
|---|---|
| Model | TC-AG 125/1 |
| Číslo dílu | 4430970 |
| Zdroj napájení | Elektrický kabel |
| svtage | 220 V |
| Wattage | 800 W |
| Průměr disku | 125 mm |
| Rychlost naprázdno | Až 11,000 ot./min |
| Rozměry produktu | 26.5 x 24.2 x 10.2 cm |
| Hmotnost položky | 1.72 kg |
| Materiál | Kov |
| Úroveň zvuku | 44 dB |
8. Záruka a podpora
Einhell products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Einhell customer service or visit the official Einhell website. Keep your proof of purchase handy for any warranty claims.
Einhell UK Webmísto: www.einhell.co.uk
