Zavedení
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Webasto Air Heater MultiControl Timer. This device is designed to enhance the functionality of your Webasto Air Top Evo heater, allowing for precise control over heating schedules and modes. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
Důležité bezpečnostní informace
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění osob nebo poškození zařízení:
- Ensure the device is installed by qualified personnel in accordance with all local and national regulations.
- Před zahájením jakékoli instalace, údržby nebo řešení problémů odpojte napájení.
- Nevystavujte zařízení extrémním teplotám, vlhkosti ani přímému slunečnímu záření.
- Používejte pouze originální Webasto replacement parts and accessories.
- Během provozu držte děti v dostatečné vzdálenosti od zařízení.
- Refer to the main heater manual for additional safety guidelines related to the heating system.
Konec produktuview
The Webasto MultiControl Timer is an advanced control unit for Webasto Air Top Evo heaters. It features a clear display, intuitive rotary knob, and push buttons for easy navigation and setting adjustments.
Obrázek 1: Přední view z Webasto MultiControl Timer. The display shows the current time (09:01) and icons for heating (Heizen) and fan operation. A rotary knob and power button are visible on the right.
Obrázek 2: Strana view z Webasto MultiControl Timer, illustrating its compact design and the connection point for the power and data cable.
Klíčové komponenty:
- Displej: Shows time, operating mode, temperature, and menu options.
- Otočný knoflík: Used for navigating menus and adjusting settings. Press to confirm selections.
- Vypínač: Turns the heater on/off or accesses quick functions.
Nastavení a instalace
Proper installation is crucial for the correct functioning of the MultiControl Timer. It is recommended that installation be performed by a certified Webasto service partner.
1. Elektrické připojení:
Connect the MultiControl Timer to the heater's control unit using the provided wiring harness. Ensure all connections are secure and correctly polarized. Refer to the wiring diagram in your main heater manual for specific connection points.
Obrázek 3: Excerpt from the electrical system diagram, showing connectors for optional control elements like the MultiControl (X9c) and Combi timer (X9a). This illustrates typical connection points for the control unit.
2. Initial Start-up and Heater Selection:
Upon first connection, the MultiControl Timer may display a message indicating missing configuration. You will need to select your specific heater model.
- Press the control knob and the quick-start knob simultaneously for 3 seconds to enter the configuration menu.
- Navigate to the "Heater" menu element using the rotary knob.
- Press the control knob to select the desired heater model (e.g., Air Top Evo 3900/5500).
Obrázek 4: Instructions for selecting the heater model during initial setup. The display shows "Air Top Evo 3900/5500" as an example selection under the "Heater" menu.
The MultiControl Timer is compatible with various Webasto heaters. For detailed compatibility, refer to the official Webasto documentation or consult a service professional.
Návod k obsluze
The MultiControl Timer offers several operating modes and functions for optimal climate control.
1. Zapnutí/vypnutí:
- Zapnout: Press the power button briefly. The display will show the current operating mode.
- Vypnout: Press and hold the power button until the display turns off or indicates standby mode.
2. Setting Temperature and Mode:
- Rotate the knob to navigate through available modes (e.g., Heating, Ventilation).
- Press the knob to select a mode.
- In heating mode, rotate the knob to adjust the desired temperature. Press the knob to confirm.
3. Timer Functions:
The MultiControl Timer allows you to program up to three start times for your heater.
- From the main screen, rotate the knob to access the timer menu.
- Select a timer slot (e.g., Timer 1, Timer 2, Timer 3).
- Set the desired start time, operating duration, and mode (heating/ventilation) for each timer.
- Activate the timer by selecting "ON" for the specific timer slot.
The timer will automatically activate the heater at the programmed time and run for the set duration.
Údržba
The Webasto MultiControl Timer requires minimal maintenance. Regular cleaning will help ensure its longevity and proper function.
- Čištění: Otřete displej a casing s měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani nadměrnou vlhkost.
- Inspekce: Pravidelně kontrolujte kabeláž, zda nevykazuje známky opotřebení nebo poškození.
- Aktualizace softwaru: Poraďte se se svým Webasto service partner for information on potential software updates for your MultiControl Timer.
Odstraňování problémů
If you encounter issues with your MultiControl Timer, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný. | No power, loose connection, or device fault. | Check power supply to the heater system. Verify all wiring connections are secure. If problem persists, contact service. |
| Heater does not start via timer. | Timer not activated, incorrect time setting, or heater fault. | Ensure the timer is activated ("ON"). Verify the correct time and date are set. Check the main heater for error codes. |
| "Missing configuration" message. | Heater model not selected or recognized. | Perform the initial setup steps to select your heater model (refer to "Setup" section). |
| Buttons/knob unresponsive. | Dočasná softwarová závada nebo hardwarový problém. | Try disconnecting and reconnecting power to the heater system (if safe to do so). If unresponsive, contact service. |
For complex issues or error codes displayed on the unit, please consult a qualified Webasto service technician.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Webast |
| Číslo modelu | 9030910D |
| Hmotnost položky | 10 unce |
| Rozměry balení | 7.17 x 5.39 x 1.54 palce |
| Kompatibilita | Webasto Air Top Evo 12V or 24V heaters (and others as per compatibility chart) |
| První dostupný termín | 22. října 2018 |
Informace o záruce
Webasto products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your MultiControl Timer, please refer to the warranty card included with your product or visit the official Webast webUschovejte si doklad o koupi pro případ reklamace.
Zákaznická podpora
For technical assistance, troubleshooting beyond this manual, or to locate an authorized service center, please contact Webasto customer support or visit their official website. Contact information can typically be found on the product packaging or the Webasto global webmísto.
Webasto Official Webmísto: www.webasto.com
