Sunco LED Wraparound Shop Light Instruction Manual (Model SHW-40W-5K-2PK)

Zavedení

Thank you for choosing the Sunco LED Wraparound Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
Tento produkt musí být instalován v souladu s platným instalačním předpisem osobou obeznámenou s konstrukcí a provozem produktu a souvisejícími riziky.
Zajistěte přívod objtagJe kompatibilní se svítidlem (120–277 V).
Do not handle live wires.
Neprovádějte úpravy svítidla. Jakékoli úpravy mohou vést ke ztrátě záruky a k ohrožení bezpečnosti.
Vhodné pro damp umístění.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

LED Wraparound Shop Light Fixture (2 units for 2-pack)
Montážní hardware
Linking Cables (for connecting multiple fixtures)
Návod k použití

Specifikace

Číslo modelu	SHW-40W-5K-2PK
Spotřeba energie	40 wattů
Světelný výkon	3500 XNUMX lumenů
Teplota barev	5000K denní světlo
svtage	120-277V
Rozměry	48 cm D x 5.35 cm Š x 2.36 cm V
Úhel paprsku	110 stupňů
CRI	80+
Typ instalace	Flush Mount / Hardwired
Speciální funkce	Prismatic Lens, Linkable (up to 8 units), Non-Dimmable
Certifikace	ETL

Pokyny k instalaci

This fixture is designed for direct surface mounting to the ceiling. Always ensure power is disconnected before starting installation.

Připravte přípravek: Carefully remove the diffuser (Part B) from the lamp base (Part A) to access the wiring and mounting points.
Namontujte přípravek: Umístěte lamp base against the ceiling where you intend to install it. Mark the mounting holes. Use appropriate mounting hardware (screws, anchors) to securely attach the lamp base to the ceiling.
Zapojení: Bring the electrical supply wires from the junction box to the fixture. Connect the wires according to local electrical codes: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Ensure all connections are secure with wire nuts.
Replace Diffuser: Once wiring is complete and secure, carefully reattach the diffuser to the lamp base. Ensure it snaps firmly into place along both sides.

Propojení více zařízení

These fixtures are linkable, allowing you to connect up to 8 units from a single power source. Use the provided linking cables or flush linking connectors to connect fixtures end-to-end. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.

Diagram showing three steps for easy installation: removing diffuser, wiring, and reattaching diffuser and mounting. — **Obrázek 1: Jednoduché kroky instalace.** This image illustrates the three primary steps for installing the Sunco LED Wraparound Shop Light: 1. Removing the diffuser (Part B) from the lamp base (Part A). 2. Connecting the electrical wires from the fixture to the junction box. 3. Replacing the diffuser and mounting the shop light directly onto the ceiling or wall.

Diagram showing two methods of linking multiple shop lights: using an 8-inch linking cable and a 1.5-inch flush linking connector. — **Figure 2: Daisy Chain Linkability.** This diagram demonstrates how to connect multiple Sunco LED shop lights. The top illustration shows connecting lights using an 8-inch linking cable, while the bottom shows a 1.5-inch flush linking connector for a seamless, continuous appearance. Up to 8 lights can be connected to a single power source.

Operace

Once properly installed and powered, the Sunco LED Wraparound Shop Light will provide instant-on, flicker-free illumination. This fixture is non-dimmable and operates at a 5000K Daylight color temperature, designed to mimic natural daylight for enhanced visibility and alertness.

Image showing a person holding a smartphone displaying a brightly lit room, with an inset graphic highlighting 'Instant-on Technology' and 'Flicker-Free Lights'. — **Figure 3: Flicker-Free Lights.** The fixture features instant-on technology and provides flicker-free illumination, which helps minimize eye strain and fatigue, improving visual comfort in various environments.

Image of a parking garage with a blue car, highlighting the 5000K Daylight color temperature of the lights, with an inset showing the light source. — **Figure 4: 5000K Daylight.** The 5000K Daylight color temperature mimics natural daylight indoors, promoting alertness and enhancing visibility, making it ideal for workshops, garages, and other utility spaces.

Údržba

The Sunco LED Wraparound Shop Light is designed for long-lasting performance with minimal maintenance. The integrated LED design means there are no bulbs to replace.

Čištění: Ensure power is off before cleaning. Wipe the fixture and diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
Inspekce: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Sunco Lighting support.

Text 'Never change a tube again!' with icons for 110-degree wide beam angle and 45+ years lifespan, set against an image of a modern office with many ceiling lights. — **Figure 5: Long Lifespan.** Designed to last over 45+ years under typical usage conditions, eliminating the need for frequent bulb replacements.

Odstraňování problémů

If you experience issues with your Sunco LED Wraparound Shop Light, refer to the following common problems and solutions:

Problém	Možná příčina	Řešení
Světlo se nerozsvítí	Chybí napájení; Uvolněné zapojení; Vadné příslušenství.	Check circuit breaker/fuse. Ensure all wire connections are secure. If problem persists, contact Sunco support.
Světlo je slabé nebo bliká	Incompatible dimmer switch (fixture is non-dimmable); Loose wiring; Power fluctuation; Fixture nearing end of life.	Ensure no dimmer switch is used. Check wiring connections. If dimming occurs after extended use (e.g., 1.5-2 years), it may indicate a component issue. Contact Sunco support for warranty assistance.
Only some linked lights are working	Loose linking cable connection; Faulty individual fixture in the chain.	Check all linking cable connections. Isolate the non-working fixture to determine if it's an individual unit issue.

Pokud kroky pro řešení potíží problém nevyřeší, kontaktujte zákaznickou podporu společnosti Sunco Lighting.

Záruka a podpora

Sunco Lighting stands behind the quality of its products. This LED Wraparound Shop Light comes with a Roční ochrana warranty. For warranty claims, technical assistance, or any questions regarding your product, please contact our knowledgeable support specialists.

Kontaktní údaje: Please refer to the Sunco Lighting webNejnovější kontaktní údaje naleznete na webových stránkách nebo v dokumentaci k nákupu.

Video: Get to know Sunco. This official video from Sunco Lighting provides an overview of the company's commitment to quality, product testing, and customer service, highlighting their dedication to customer satisfaction and product reliability.

Sunco Lighting SHW-40W-5K-2PK