Zavedení
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your COSTWAY 2-in-1 Rolling Cabinet Storage Chest Box. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.
Bezpečnostní informace
Always secure the cabinet when not in use to prevent tipping. Use the brakes on the casters to keep it in place. Be cautious when moving the cabinet to avoid injury from the handle or casters. Do not overload drawers. Distribute weight evenly to maintain stability. Keep children away from the unit during assembly and operation.
Seznam dílů
Před zahájením montáže se ujistěte, že jsou všechny díly přítomny a nepoškozené. Pokud některé díly chybí nebo jsou poškozené, nepokračujte v montáži. Požádejte o pomoc zákaznickou podporu.
- Top Tool Chest (with 4 small drawers and locking mechanism)
- Rolling Cabinet Base (with 2 large drawers, 1 bottom cabinet, and side handle attachment points)
- Casters (4 total, 2 with brakes)
- Boční klika
- Keys for Top Tool Chest Lock
- Montážní materiál (šrouby, matice, podložky)
- Side Hooks (for pegboard section)
Figure 1: Fully assembled COSTWAY 2-in-1 Rolling Cabinet Storage Chest Box.
Montážní návod
Pro správnou montáž pečlivě dodržujte tyto kroky. Pro některé kroky se doporučuje, aby provedly dvě osoby.
- Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu. Položte je na čistý, rovný a měkký povrch, abyste zabránili poškrábání.
- Attach Casters to Rolling Cabinet Base:
- Identify the four casters. Two casters will have locking brakes.
- Attach the casters to the bottom of the rolling cabinet base using the provided hardware. Ensure the two locking casters are installed on the same side for easier access.
- Pevně utáhněte všechny šrouby.
- Install Side Handle:
- Locate the side handle and the corresponding mounting holes on the side of the rolling cabinet base.
- Attach the handle using the provided screws and tighten them firmly.
- Place Top Tool Chest:
- Carefully lift the top tool chest and align it with the top surface of the rolling cabinet base.
- Ensure it is centered and stable. The top chest can be used separately or placed on the rolling cabinet.
- Instalace bočních háků:
- Insert the provided hooks into the pegboard holes on the side of the rolling cabinet base. These are for hanging smaller tools.
Figure 2: Product dimensions for both the top chest and rolling cabinet.
Figure 3: Detailed features including universal wheels, side handle, external locking system, ball-bearing slides, and side hooks.
Návod k obsluze
- Používání zásuvek:
- The drawers feature ball-bearing slides for smooth opening and closing. Pull the drawer handle gently to open and push firmly to close.
- Avoid slamming drawers to prevent damage to the slides.
- Distribute the weight of tools evenly within each drawer.
Figure 4: Top chest and rolling cabinet with drawers extended, demonstrating storage space.
- Uzamykací mechanismus:
- The top tool chest is equipped with a lock to secure its contents. Insert the key and turn to lock or unlock.
- Ensure all drawers in the top chest are fully closed before locking.
- Náhradní klíče uchovávejte na bezpečném místě.
- Přemisťování skříně:
- To move the cabinet, unlock the two braking casters by flipping their levers.
- Use the side handle to steer and push the cabinet to your desired location.
- Once in position, engage the brakes on the casters to prevent unintended movement.
- Separating the Units:
- The top tool chest can be lifted off the rolling cabinet base for separate use or transport.
- Ensure the top chest is empty or its contents are secured before lifting.
Figure 5: The top tool chest and rolling cabinet base shown as separate units.
Údržba
- Čištění: Vnější povrchy otřete měkkým, damp cloth. Avoid abrasive cleaners that may damage the powder-coated finish.
- Posuvy zásuvek: Periodically check the ball-bearing slides for smooth operation. If they become stiff, apply a small amount of silicone lubricant.
- Kolečka: Inspect casters regularly for debris or damage. Clean as needed to ensure smooth rolling and effective braking.
- Železářské zboží: Periodically check all screws and bolts for tightness. Retighten if necessary to maintain structural integrity.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zásuvky jsou tuhé nebo se obtížně otevírají/zavírají. | Overloaded drawer; debris in slides; dry slides. | Reduce weight in drawer; clean slides; apply silicone lubricant to ball-bearing slides. |
| Cabinet does not roll smoothly. | Caster brakes engaged; debris in casters; damaged casters. | Disengage caster brakes; clean casters; replace damaged casters if necessary. |
| Top chest lock is not working. | Drawer not fully closed; key not fully inserted or turned. | Ensure all top chest drawers are fully closed; insert key completely and turn firmly. |
| Kabinet působí nestabilně. | Uneven weight distribution; loose caster bolts. | Redistribute contents evenly; tighten all caster bolts and assembly hardware. |
Specifikace
- Model: VD-34996BKTL
- Rozměry (celkové): 13"H x 23.5"Š x 42.5"V
- Materiál: Alloy Steel (Powder Coated Finish)
- Počet zásuvek: 6 (4 small in top chest, 2 large in rolling cabinet)
- Skladování: Top chest, 6 drawers, 1 bottom cabinet, side pegboard with hooks
- Kolečka: 4 (2 s brzdami)
- Speciální vlastnosti: Lockable top chest, ball-bearing drawer slides, side handle
- Hmotnost položky: 51.5 libry
- Požadovaná montáž: Ano
Záruka a podpora
For warranty information or technical support, please refer to the documentation included with your purchase or contact COSTWAY customer service directly. Contact details are typically available on the manufacturer's website or original packaging.
