1. Konec produktuview
This manual provides essential information for the installation, operation, and maintenance of your EMKE Design Radiator, Model FR6310A-DR. This horizontal panel radiator is designed for efficient heating in residential spaces.
Klíčové vlastnosti:
- Rozměry: 630 x 1000 mm (Height x Width)
- Tepelný výkon: 730 W
- Počet trubek: 13
- Doporučená oblast: Až 6 m²
- Vrstvy: Single-layer design
- Hmotnost: 19 kg
- Materiál: High-quality SPCC steel, compliant with BS EN 442 standard, CE certified
- Spojení: Side connection (left), G1/2" thread, 50 mm connection size, 55mm distance from wall
Figure 1: EMKE Design Radiator (630x1000mm, Anthracite)
2. Obsah balení
Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny a nepoškozené.
- EMKE Design Panel Radiator
- Mounting Kit (includes blind plugs, long screws, rubber rings, rubber pads)
- Návod k instalaci (tento návod)
Poznámka: Ventily nejsou součástí dodávky a je nutné je zakoupit samostatně.
Figure 2: Included Accessories and Packaging Layers
3. Nastavení a instalace
Installation should be performed by a qualified professional to ensure safety and proper function. Always turn off the main water supply before beginning any work.
3.1 Důležité aspekty
- Ensure the wall material is suitable to support the radiator's weight (19 kg plus water).
- Accurate measurements are crucial for correct mounting. Refer to the technical drawing for precise dimensions and connection points.
- The radiator is designed for hot water central heating systems.
3.2 Možnosti připojení
The radiator offers flexible connection options:
- Side Connection (Left): This is the standard configuration. It can use either a split valve or a connected valve.
- Connection at Both Ends: The four corners of the radiator can also be used for water inlet and outlet. For this method, a split valve must be used.
Figure 3: Radiator Connection Methods
3.3 Specifikace připojení
- Připojovací vlákno: G1/2"
- Vzdálenost připojení: 50 mm
- Distance from Interface to Wall: 55 mm
Figure 4: Connection Thread and Distance
3.4 Technický výkres
Consult the technical drawing for detailed measurements and mounting points. Precise measurement before drilling is essential.
Obrázek 5: Technický výkres s kótami
4. Návod k obsluze
The EMKE Design Radiator operates as part of a hot water central heating system, distributing heat through convection.
4.1 Heating Principle
Hot water circulates through the radiator panels, transferring heat to the surrounding air. This creates a comfortable and even warmth in the room.
Figure 6: Hot Water Heating Principle
4.2 Regulace teploty
Temperature control is managed by external valves (not included) connected to your central heating system. Adjust these valves to regulate the heat output of the radiator.
5. Údržba
Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho radiátoru.
5.1 Čištění
- Otřete povrch chladiče měkkým hadříkemamp tkanina.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the anthracite finish.
- Do not use metal objects for cleaning, as the paint finish is sensitive and can chip.
5.2 Odvzdušnění chladiče
If your radiator is not heating evenly or makes gurgling noises, it may contain trapped air. Bleed the radiator periodically using a radiator key (not included) to release air and improve efficiency.
6. Řešení problémů
This section addresses common issues you might encounter with your EMKE Design Radiator.
6.1 Radiator Not Heating
- Zpětné ventily: Ensure both inlet and outlet valves are fully open.
- Odvzdušnění: Trapped air can prevent proper heating. Bleed the radiator as described in the Maintenance section.
- Tlak v systému: Verify that your central heating system's pressure is within the recommended range.
6.2 Nerovnoměrné vytápění
- Odvzdušnění: Uneven heating, especially a cold top and warm bottom, often indicates trapped air.
- vyvažování: Your heating system may need balancing. Consult a heating engineer for this procedure.
6.3 Netěsnosti
- Zkontrolujte připojení: Ensure all pipe connections are tight. Do not overtighten.
- Valve Issues: Inspect valves for any signs of leakage.
- If a leak persists, immediately turn off the water supply to the radiator and contact a qualified plumber.
7. Specifikace
| Atribut | Detail |
|---|---|
| Značka | EMKE |
| Číslo modelu | FR6310A-DR |
| Rozměry produktu (V x Š x H) | 63 x 100 x 4.9 cm |
| Hmotnost | 19 kg |
| Tepelný výkon | 730 W |
| Počet trubek | 13 |
| Doporučená topná plocha | 6 m² |
| Vrstvy | Jedna vrstva |
| Barva | Antracit |
| Materiál | Vysoce kvalitní SPCC ocel |
| Soulad se standardy | BS EN 442, CE Certified |
| Typ připojení | Side connection (left) |
| Připojovací závit | G1/2" |
| Velikost připojení | 50 mm |
| Vzdálenost od zdi | 55 mm |
| Způsob vytápění | Convection (Hot Water) |
| Typ montáže | Držák na zeď |
| Země původu | Čína |
| První dostupný termín | 24. března 2022 |
Figure 7: Actual Size Comparison (Note: Please measure your installation space before purchase)
8. Záruka a podpora
EMKE products are manufactured to high-quality standards and comply with EN442 norms.
8.1 Informace o záruce
Specific warranty details for your EMKE Design Radiator are typically provided at the point of purchase or can be found on the official EMKE webstránky. Uschovejte si prosím doklad o koupi pro případné reklamace.
8.2 Zákaznická podpora
For technical assistance, installation queries, or other support needs, please refer to the contact information provided by your retailer or visit the official EMKE website. You can find more information about EMKE products and support at Značkový obchod EMKE.
