Cooper Lighting 24FP4740C LED Flat Panel User Manual

1. Úvod

This manual provides essential information for the safe installation, operation, and maintenance of the Cooper Lighting 24FP4740C LED Flat Panel. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.

The 24FP4740C is a 2x4 foot LED flat panel designed for indoor use, offering 4800 lumens of 4000K light. It features universal voltage construction and a 0-10V dimming driver, making it suitable for various applications. This product is damp location listed and DLC qualified.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.

POZOR: Risk of fire. Use only in circuits rated for the specified voltage and current. Ensure all electrical connections are made in accordance with local and national electrical codes.

• Always ensure the power supply is turned off before handling the fixture.
• Instalaci by měl provádět kvalifikovaný elektrikář.
• Neinstalujte zařízení na místech, kde provozní teplota překračuje jmenovitou teplotu svítidla.
• Neupravujte svítidlo ani jeho součásti.
• Během instalace používejte vhodné osobní ochranné prostředky (OOP).

3. Nastavení a instalace

The Cooper Lighting 24FP4740C LED Flat Panel is designed for recessed installation in a 2x4 grid ceiling. It can also be surface mounted using the optional kit #FPSURF24 (sold separately).

Obrázek 1: Úhlová view of the Cooper Lighting 24FP4740C LED Flat Panel, showcasing jeho štíhlý profesionálfile and white frame.

3.1 Recessed Installation (2x4 Grid Ceiling)

1. Ensure power to the installation area is disconnected at the circuit breaker.
2. Remove the existing ceiling tile from the 2x4 grid opening where the panel will be installed.
3. Connect the electrical wiring from the building to the fixture's junction box. Ensure proper grounding and secure all connections with wire nuts.
4. Carefully place the LED flat panel into the 2x4 grid opening. The panel should rest securely on the grid rails.
5. Obnovte napájení a vyzkoušejte zařízení.

3.2 Surface Mount Installation (Optional)

For surface mount applications, the Cooper Lighting FPSURF24 surface mount kit is required (sold separately). Follow the instructions provided with the surface mount kit for proper installation.

4. Návod k obsluze

The 24FP4740C LED Flat Panel operates on 120 Volts and can be controlled via a standard wall switch or a compatible 0-10V dimming system.

4.1 Basic On/Off Operation

Toggle the connected wall switch to turn the LED panel on or off.

4.2 Funkce stmívání

This fixture is equipped with a 0-10V dimming driver. Connect a compatible 0-10V dimmer switch (not included) to the designated dimming wires of the fixture. Follow the dimmer manufacturer's instructions for wiring and operation. The 0-10V dimmer allows for adjustment of light output from 100% down to 10% or lower, depending on the dimmer.

5. Údržba

The Cooper Lighting 24FP4740C LED Flat Panel requires minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je přístroj vypnutý. Použijte měkký, suchý nebo lehce navlhčený hadřík.amp cloth to wipe the surface of the panel. Do not use abrasive cleaners, solvents, or cleaners containing ammonia, as these may damage the fixture.
• Žádné díly opravitelné uživatelem: There are no user-serviceable parts inside the LED panel. Do not attempt to open or repair the fixture.

6. Řešení problémů

If the LED panel is not functioning correctly, refer to the following troubleshooting steps:

• Světlo se nerozsvítí:
  • Zkontrolujte jistič, abyste se ujistili, že je do svítidla přivedeno napájení.
  • Ověřte, že jsou všechna elektrická připojení zajištěna.
  • Ujistěte se, že je nástěnný vypínač v poloze „ZAPNUTO“.
• Světlo nečekaně bliká nebo ztlumuje:
  • Ensure the 0-10V dimmer (if installed) is compatible and correctly wired.
  • Zkontrolujte, zda nejsou uvolněné kabelové spoje.
  • Ověřte, zda je napájení stabilní.

If issues persist after performing these checks, contact a qualified electrician or Cooper Lighting customer support.

7. Specifikace

8. Záruka a podpora

For warranty information or technical support, please contact Cooper Lighting customer service. Details regarding specific warranty terms and conditions are typically provided with the product packaging or can be found on the manufacturer's official webmísto.

Výrobce: MĚDĚNÉ OSVĚTLENÍ