Návod k obsluze padacího rámu SW-Motech pro BMW F 750/850 GS (2018-)

Zavedení

This instruction manual provides essential information for the proper installation, use, and maintenance of your SW-Motech Crash Bar. Designed specifically for the BMW F 750 GS and F 850 GS models from 2018 onwards, this crash bar offers reliable protection for important motorcycle components. Please read this manual thoroughly before beginning installation to ensure safety and correct fitment.

Bezpečnostní informace

• Doporučená profesionální instalace: If you are not confident in your mechanical abilities, it is highly recommended to have this product installed by a qualified motorcycle technician.
• Přečtěte si všechny pokyny: Ensure you understand all steps before proceeding.
• Používejte správné nástroje: Always use appropriate tools for each step to prevent damage to the product or motorcycle.
• Specifikace točivého momentu: Adhere strictly to all torque specifications provided in the detailed mounting instructions included with the product. Incorrect torque can lead to component failure.
• Pravidelná kontrola: Periodically check all fasteners for tightness, especially after the first few rides and after any off-road use.
• Stabilita motocyklu: Ensure the motorcycle is stable and securely supported before and during installation.

Obsah balení

Před zahájením instalace se prosím ujistěte, že jsou všechny položky přítomny:

• 2 x SW-Motech Crash Bars (Left and Right)
• Mounting Material (bolts, washers, spacers, etc.)
• Detailed Mounting Instructions (specific to your model)

Nastavení (instalace)

Následující kroky poskytují obecný přehledview. Refer to the specific, detailed mounting instructions included in your package for precise, model-specific guidance and torque values.

1. Příprava motocyklu: Park the motorcycle on a firm, level surface. Ensure it is stable, preferably on a center stand or a suitable paddock stand. Allow the engine to cool completely.
2. Určete montážní body: Locate the designated mounting points on the motorcycle frame and engine, as indicated in the detailed instructions.
3. Initial Fitment: Loosely attach the crash bar components to the motorcycle using the provided hardware. Do not tighten any bolts fully at this stage.
4. Zarovnání a úprava: Ensure both crash bars are correctly aligned and positioned without interfering with other motorcycle components (e.g., handlebars, wheels, fairings).
5. Utáhněte upevňovací prvky: Following the sequence and torque specifications outlined in the detailed instructions, gradually tighten all bolts. Use a torque wrench for accuracy.
6. Závěrečná kontrola: After tightening, visually inspect all connections to confirm secure installation. Ensure no tools or loose parts remain on the motorcycle.

Popis obrázku: This image displays the SW-Motech Crash Bar securely mounted on the left side of a BMW F 750/850 GS motorcycle. The black tubular steel frame extends around the engine and lower fairing, providing robust protection for critical components. Visible elements include the silver engine casing with the BMW logo, the motorcycle's seat, and parts of the front suspension.

Provozní

The SW-Motech Crash Bar is a passive protection device. Once correctly installed, it operates by providing a robust barrier to absorb impact energy and protect critical motorcycle components during a fall or slide. No active operation is required from the user.

Údržba

• Pravidelná kontrola: Periodically inspect the crash bars for any signs of damage, cracks, bends, or corrosion. Check all mounting bolts for tightness, especially after off-road riding or long trips.
• Čištění: Clean the crash bars with mild soap and water. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
• Post-Impact Assessment: If the motorcycle has been involved in a fall or impact, thoroughly inspect the crash bars and their mounting points for any damage. Even minor impacts can compromise the structural integrity. Replace damaged crash bars immediately.

Odstraňování problémů

• Difficulty with Fitment: Ensure you have the correct crash bar model for your specific BMW F 750 GS or F 850 GS (2018-). Double-check that all components are oriented correctly according to the detailed mounting instructions. Do not force components into place.
• Uvolněné šrouby: If bolts become loose after installation, re-tighten them to the specified torque values. Consider using a thread-locking compound (e.g., blue Loctite) on the threads, as recommended in the detailed instructions, to prevent loosening from vibration.
• Neobvyklé zvuky/vibrace: If you notice new noises or vibrations after installation, immediately stop and inspect the crash bars and their mounting points. Ensure nothing is loose or making contact with other motorcycle parts.

Specifikace

Informace o záruce

SW-Motech products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty documentation included with your purchase or visit the official SW-Motech webUschovejte si doklad o koupi pro případné reklamace.

Podpora

If you encounter any issues during installation or use, or if you have questions not covered in this manual, please contact SW-Motech customer support or your authorized dealer. Contact information can typically be found on the official SW-Motech webna webu nebo v dokumentaci k nákupu.