1. Úvod
The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument ampzvedání.
2. Klíčové vlastnosti
- Compact and powerful performance; Light weight and highly portable.
- 1000 Watt peak power Class-D ampfiltrační modul.
- Easily selected contours for commonly-used applications.
- Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
- Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
- Professional appearance looks great in any application.
- Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.
3. Nastavení
Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

Obrázek 1: Přední strana view of the QSC CP8 loudspeaker, showcasinjeho kompaktní design a ochranná mřížka.

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.
3.1 Připojení napájení
- Ujistěte se, že je vypínač na zadním panelu v poloze „VYPNUTO“.
- Connect the provided power cord to the AC inlet on the rear panel.
- Zapojte druhý konec napájecího kabelu do vhodné elektrické zásuvky.
3.2 Audio připojení
- Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
- Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.
4. Návod k obsluze
4.1 Zapnutí/vypnutí
- To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
- Chcete-li přístroj vypnout, přepněte vypínač do polohy „VYPNUTO“.
4.2 Adjusting Volume and Gain
- Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
- The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.
4.3 DSP Contours
The CP8 features selectable DSP contours to optimize sound for different applications:
- VÝCHOZÍ: Nastavení pro všeobecné účely.
- DANCE: Enhanced bass response for music playback.
- EXT SUB: Optimized for use with an external subwoofer.
- MONITOR PODLAHY: Reduces low-frequency build-up for stage monitorování.
- MLUVENÝ PROJEV: Zlepšuje čistotu hlasu.
Select the appropriate contour using the switch on the rear panel.
4.4 Připojení Bluetooth
The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.
5. Údržba
- Čištění: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
- Skladování: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Zacházení: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.
6. Řešení problémů
- Žádný zvuk: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
- Zkreslený zvuk: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
- Problémy s napájením: Ujistěte se, že je napájecí kabel bezpečně připojen a elektrická zásuvka funguje.
7. Specifikace
| Funkce | Detail |
|---|---|
| Typ montáže | Stojací, Nástěnná montáž |
| Materiál | Plast |
| Název modelu | CP8-NA |
| Typ reproduktoru | Monitor |
| Speciální funkce | Přenosný |
| Doporučená použití | For main PA, stage monitor, instrument amplification, and portable PA systems |
| Kompatibilní zařízení | Notebook, MP3 přehrávač, chytrý telefon, tablet |
| Počet jednotek | 1.0 Počet |
| Barva | Černý |
| Rozměry produktu | 14"H x 20"Š x 14"V |
| Hmotnost položky | 10 libry |
| Kontrolní metoda | Dotek |
| Bezdrátová komunikace | Bluetooth |
| Velikost reproduktoru | 8 palce |
| Zdroj napájení | Elektrický kabel |
| Průměr basového reproduktoru | 20.32 centimetrů |
| Průměr výškového reproduktoru | 1 palce |
| Reproduktor AmpTyp liifikace | Aktivní |
| Wattage | 1000 wattů |
| Frekvenční odezva | 20 kHz |
| Technologie připojení | Pomocný |
8. Co je v krabici
- QSC CP8 8-Inch Compact Powered Loudspeaker
- Uživatelská příručka
- Napájecí kabel
9. Záruka a podpora
The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC webnebo kontaktujte jejich oddělení zákaznických služeb.
Další zdroje a informace o produktech naleznete na QSC Store on Amazon.





