1. Úvod
This manual provides comprehensive instructions for the Behringer SUPER-X PRO CX2310, a high-precision stereo 2-way/mono 3-way crossover with a dedicated subwoofer output. Designed for professional audio applications, this device accurately divides audio signals into different frequency bands, optimizing sound reproduction through multiple loudspeakers.
The CX2310 ensures precise frequency separation, allowing each speaker component (e.g., woofers, mid-range drivers, tweeters, subwoofers) to receive only the frequencies it is designed to reproduce efficiently. This results in improved sound clarity, increased system efficiency, and enhanced speaker protection.
Obrázek 1: Zkosená přední strana view of the Behringer SUPER-X PRO CX2310 crossover.
2. Důležité bezpečnostní pokyny
Before operating the CX2310, please read and adhere to the following safety guidelines:
- Napájení: Connect the unit only to the specified mains voltage. Ensure the power cord is undamaged and properly grounded.
- vlhkost: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the device.
- Větrání: Zajistěte dostatečné větrání. Neblokujte větrací otvory.
- Teplo: Do not place the unit near heat sources such as radiators, heat registers, or other heat-producing appliances.
- Servis: Nepokoušejte se o opravu jednotky sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
- Čištění: Čistěte pouze suchým hadříkem.
3. Klíčové vlastnosti
The Behringer SUPER-X PRO CX2310 offers a range of features for precise audio signal processing:
- Provozní režimy: Configurable for stereo 2-way or mono 3-way operation.
- Výstup subwooferu: Dedicated mono subwoofer output with independent frequency control.
- Křížové filtry: State-variable 24 dB/octave Linkwitz-Riley filters for precise frequency separation.
- Individual Mute Switches: Each output features a mute switch for easy system adjustment and troubleshooting.
- Ovládání vstupního zisku: Adjustable input gain for level matching.
- Output Level Controls: Independent level controls for all outputs.
- Phase Invert Switches: Phase invert switches on all outputs for flexible system alignment.
- LED indikátory: Clear LED indicators for input clip, mode selection, and output levels.
- Konektory: Balanced XLR inputs and outputs for professional connectivity.
4. Ovládací prvky a konektory
4.1. Ovládací prvky na předním panelu
Obrázek 2: Přední panelview of the CX2310.
- VSTUPNÍ ZISK: Upravuje vstupní citlivost pro příslušný kanál.
- CLIP LED: Illuminates when the input signal is clipping. Reduce input gain if this LED lights up frequently.
- NÍZKÝ STŘIH: Activates a high-pass filter to remove unwanted low frequencies.
- XOVER FREQ (LOW/HIGH): Sets the crossover frequency between the low and high outputs for stereo 2-way mode, or low and mid outputs for mono 3-way mode.
- XOVER FREQ (MID/HIGH): Sets the crossover frequency between the mid and high outputs for mono 3-way mode.
- LOW OUTPUT LEVEL: Adjusts the output level for the low-frequency band.
- HIGH OUTPUT LEVEL: Adjusts the output level for the high-frequency band.
- MID OUTPUT LEVEL: Adjusts the output level for the mid-frequency band (mono 3-way mode only).
- MUTE BUTTONS: Silences the corresponding output for system tuning.
- PHASE INVERT: Inverts the phase of the corresponding output signal.
- PŘEPÍNAČ REŽIMU: Selects between STEREO 2-WAY and MONO 3-WAY operation.
- SUBWOOFER FREQ: Sets the crossover frequency for the dedicated subwoofer output.
- SUBWOOFER GAIN: Adjusts the output level for the subwoofer.
- VYPÍNAČ: Zapíná nebo vypíná jednotku.
4.2. Konektory zadního panelu
Obrázek 3: Zadní panelview of the CX2310.
- AC VSTUP: Standard IEC connector for the mains power cable.
- INPUT L/R: Balanced XLR inputs for the stereo audio signal.
- LOW OUTPUT L/R: Balanced XLR outputs for the low-frequency signal.
- MID OUTPUT L/R: Balanced XLR outputs for the mid-frequency signal (mono 3-way mode only).
- HIGH OUTPUT L/R: Balanced XLR outputs for the high-frequency signal.
- SUB OUT: Balanced XLR output for the mono subwoofer signal.
5. Nastavení a připojení
Proper setup is essential for optimal performance. Always ensure all audio equipment is powered off before making connections.
5.1. Stereo 2-Way Operation
This configuration is suitable for systems with main stereo speakers and an optional subwoofer.
- Connect the stereo output of your mixer or audio source to the VSTUP L a VSTUP R XLR connectors on the CX2310 rear panel.
- Nastavte MODE switch on the front panel to STEREO 2-WAY.
- Připojte LOW OUTPUT L/R to the inputs of your low-frequency amplifier (e.g., for woofers).
- Připojte HIGH OUTPUT L/R to the inputs of your high-frequency amplifier (e.g., for tweeters/mid-range).
- If using a subwoofer, connect the VYHLEDAT to the input of your subwoofer ampživější nebo aktivní subwoofer.
- Připojte napájecí kabel k AC VSTUP and then to a suitable power outlet.
5.2. Mono 3-Way Operation
This configuration is ideal for a single, full-range speaker system divided into low, mid, and high frequency bands.
- Connect a mono audio source to the VSTUP L XLR connector. (The CX2310 will sum the inputs for mono 3-way operation if both are connected, or use only the left input if only one is present).
- Nastavte MODE switch on the front panel to MONO 3-WAY.
- Připojte LOW OUTPUT L to the input of your low-frequency ampživější.
- Připojte MID OUTPUT L to the input of your mid-frequency ampživější.
- Připojte HIGH OUTPUT L to the input of your high-frequency ampživější.
- If using a subwoofer, connect the VYHLEDAT to the input of your subwoofer ampživější nebo aktivní subwoofer.
- Připojte napájecí kabel k AC VSTUP and then to a suitable power outlet.
6. Návod k obsluze
Once connected, follow these steps to configure and operate your CX2310:
- Zapnutí: Turn on all connected amplifiers and then the CX2310. When powering down, turn off the CX2310 first, then the ampzáchranáři.
- Počáteční nastavení: Nastavit vše ZISK NA VSTUPU a VÝSTUPNÍ ÚROVEŇ controls to their center (0 dB) position. Set crossover frequencies to a starting point recommended by your speaker manufacturer, or a common value like 100 Hz for low/high and 2 kHz for mid/high.
- Nastavení vstupní úrovně: Play an audio signal through your system. Adjust the ZISK NA VSTUPU until the signal is strong but the CLIP LED only flashes occasionally on peaks.
- Nastavení dělicí frekvence: Carefully adjust the XOVER FREQ controls to achieve the desired frequency separation. Listen for smooth transitions between frequency bands.
- Nastavení výstupní úrovně: Use the individual VÝSTUPNÍ ÚROVEŇ controls to balance the volume of each frequency band. The ZTLUMIT buttons can be used to isolate bands for easier adjustment.
- Integrace subwooferu: Upravte SUBWOOFER FREKV a SUBWOOFER GAIN controls to blend the subwoofer output seamlessly with the main speakers.
- Fázové zarovnání: Experimentujte s INVERZE FÁZE switches if you notice phase cancellation or an unnatural sound. This helps ensure all speakers are working in phase.
7. Údržba
The Behringer CX2310 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- Čištění: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid abrasive cleaners or solvents.
- Prostředí: Operate the unit in a clean, dry environment. Avoid excessive dust, humidity, and extreme temperatures.
- Větrání: Ujistěte se, že ventilační otvory nejsou zablokované, aby nedošlo k přehřátí.
- Skladování: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place, preferably in its original packaging.
8. Řešení problémů
If you encounter issues with your CX2310, consult the following table before contacting support:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No sound from any output. | Unit not powered on; incorrect connections; input gain too low; all outputs muted. | Check power cable and switch; verify all XLR connections; increase input gain; ensure mute buttons are disengaged. |
| No sound from a specific output. | Output muted; output level too low; incorrect mode selection. | Check the specific output's mute button; increase output level; verify correct 2-way/3-way mode. |
| Zkreslený zvuk. | Input signal too high (clipping); output signal too high. | Reduce input gain if CLIP LED is constantly lit; reduce output levels. |
| Hučení nebo šum. | Ground loop; unbalanced cables; faulty cables. | Ensure all equipment is properly grounded; use balanced XLR cables; test with different cables. |
| Subwoofer not working. | Subwoofer output muted; subwoofer gain too low; incorrect frequency setting. | Check subwoofer mute button; increase subwoofer gain; adjust subwoofer frequency control. |
9. Specifikace
Technical specifications for the Behringer SUPER-X PRO CX2310:
- Hmotnost položky: 7.5 libry
- Rozměry produktu: 19 x 1.75 x 8.46 palce
- Typ konektoru: XLR
- Hardwarové rozhraní: 1/4-inch Audio (Note: Product images show XLR, specification might be generic or refer to internal components)
- Formát signálu: Analogový
- Zdroj napájení: Elektrický kabel
- svtage: 9 voltů (vnitřní provozní napětítage, not mains input)
- Křížové filtry: Linkwitz-Riley, 24 dB/octave
Figure 4: Silhouette illustrating the dimensions of the CX2310.
10. Záruka a podpora
The Behringer SUPER-X PRO CX2310 comes with a standard 1-year limited warranty. Users can extend this warranty to 3 years by registering their product online within 90 days of purchase. For detailed warranty terms and conditions, please refer to the official Behringer webmísto.
For technical support, service, or further inquiries, please visit the official Behringer support page or contact their customer service department. Keep your purchase receipt and product serial number readily available when seeking support.
Pro více informací navštivte Behringer Official Webmísto.
