Artemide Tolomeo Mini 100W E26 Stolek Lamp Uživatelská příručka

1. Úvod

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Bezpečnostní informace

• Ujistěte se, že lamp is connected to a power source within the specified voltage rozsah (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Vyvarujte se umístění lamp in areas with excessive moisture or extreme temperatures.
• Nepokoušejte se upravovat lamp's electrical components. Refer servicing to qualified personnel.
• Nechte si lamp daleko od hořlavých materiálů.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Hliníková základna
• Odstín
• Napájecí kabel

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Pokyny k nastavení

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, rovný povrch.
2. Připevněte základnu: Bezpečně připevněte lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Nainstalujte žárovku: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Umístěte Lamp: Umístěte lamp na stabilním rovném povrchu.
5. Připojte napájení: Zapojte napájecí kabel do standardní elektrické zásuvky 120V.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Návod k obsluze

• Zapnutí/vypnutí: Jáamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Nastavení polohy: Jáamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Údržba

• Čištění: Odpojte lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Výměna žárovky: Ujistěte se, že lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Napětí v kloubu: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Řešení problémů

Lamp nezapne se:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Blikání světla:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Paže nedrží polohu:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Specifikace

9. Záruka a podpora

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.