Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Úvod

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Bezpečnostní pokyny

Důležité: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo zranění osob.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Zajistěte napájení objtage odpovídá štítku s výkonem na spotřebiči.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Neponořujte spotřebič do vody nebo jiných kapalin.
• Pokud je napájecí kabel poškozen, musí jej vyměnit výrobce, jeho servisní zástupce nebo podobně kvalifikovaná osoba, aby se předešlo nebezpečí.
• Tento spotřebič není určen pro použití osobami (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatečnými zkušenostmi a znalostmi, pokud na ně nedohlíží osoba odpovědná za jejich bezpečnost nebo jim nebyla poskytnuta instrukce ohledně používání spotřebiče.

3. Konec produktuview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Topná tělesa: Horizontal round tubes for towel drying and radiant heat.
• Ventilátor: Located at the bottom, provides rapid heat for quick room warming.
• Ovládací panel LCD: Displays temperature, mode, and programming settings.
• Ovládací tlačítka: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Obrázek 3.2: Přední strana view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view spotřebiče, ukázkaasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Obrázek 3.3: Úhlové view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Nastavení a instalace

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Montáž

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Elektrické připojení

• Varování: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Zajistěte správné uzemnění.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Návod k obsluze

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Zapnutí/vypnutí

• Stiskněte tlačítko Moc button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 LCD displej a ovládací prvky

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Režim, +/-, Prog) to adjust settings.

5.3 Provozní režimy

Your radiator typically offers several operating modes:

• Komfortní režim: Maintains a set temperature for continuous comfort.
• Eko režim: Udržuje nižší, energeticky úspornou teplotu.
• Režim ochrany proti mrazu: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Režim programu: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Stiskněte tlačítko Režim button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programování

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Stiskněte tlačítko Prog tlačítko pro vstup do programovacího režimu.
2. Použijte Režim or arrow buttons to select the day and time segment you wish to program.
3. Použijte +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Stiskněte Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Údržba

Pravidelné čištění zajišťuje optimální výkon a prodlužuje životnost vašeho radiátoru.

• Čištění: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Generální inspekce: Pravidelně kontrolujte napájecí kabel a zástrčku, zda nevykazují známky poškození. Pokud zjistíte poškození, obraťte se na kvalifikovaného technika.

7. Řešení problémů

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Specifikace

• Značka: Sauter
• Model: Marapi
• Číslo modelu: 3410532201757
• Typ: Electric Towel Dryer Radiator with Blower
• Výkon: 1750 wattů
• Řízení: LCD Screen, Programmable
• Hmotnost: Přibližně 27.25 kg
• ASIN: B07HGPKKJD

9. Záruka a podpora

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webUschovejte si doklad o koupi pro případ reklamace.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webwebu nebo na obalu vašeho produktu.

Sauter Official Webmísto: www.sauter.fr (Ověřte prosím správný regionální webstránky pro podporu.)