Invacare Tracer EX2 Manual Folding Wheelchair User Manual

1. Konec produktuview

The Invacare Tracer EX2 Standard Manual Folding Wheelchair is designed for adults requiring mobility assistance. It features a robust carbon steel frame and a dual-axle design for adjustable seat-to-floor heights. This wheelchair combines durability with user comfort, making it suitable for long-term use.

Klíčové vlastnosti:

• Robust Carbon Steel Frame: Ensures strength and longevity, supporting users up to 250 lbs.
• Dual-Axle Design: Allows for easy conversion to a hemi seat, with adjustable seat-to-floor heights from 17.5" to 19.5".
• Odolné čalounění: Features dual-embossed vinyl seat and back with heavy-duty inner liners to prevent stretching.
• "No Flex" Wheels: Urethane rear tires mounted on "no flex" wheels provide smooth and reliable movement.
• Removable Full-Length Padded Armrests: Enhance comfort and support, aiding in user transfers.

2. Nastavení a montáž

The Invacare Tracer EX2 wheelchair is designed for straightforward setup. While it often arrives largely pre-assembled, some adjustments and component attachments may be necessary before first use.

2.1 Rozložení invalidního vozíku

1. Ensure the wheelchair is on a flat, stable surface.
2. Grasp the handrims and push outwards to open the frame.
3. Press down firmly on the seat rails until the seat is fully flat and locked into position.

2.2 Adjusting Seat Height (Dual-Axle)

The dual-axle design allows for two seat-to-floor height settings: 19.5" (standard) and 17.5" (hemi). To adjust:

1. Locate the axle plate on the rear wheels.
2. Remove the axle bolt and reposition it to the desired height setting.
3. Ensure both sides are adjusted equally and securely fastened.

Popis obrázku: Přední strana view of the Invacare Tracer EX2 wheelchair. Labels indicate a seat and back width of 18 inches and an adjustable seat height of 17.5 or 19.5 inches. Quick-release brackets for legrests or footrests are also highlighted.

2.3 Attaching Armrests

The wheelchair comes with removable full-length padded armrests. To attach:

1. Align the armrest posts with the receptacles on the wheelchair frame.
2. Press down firmly until the armrests click securely into place.
3. To remove, press the release button (if present) and lift the armrest.

Popis obrázku: Strana view of the Invacare Tracer EX2 wheelchair. Key features such as the full-length removable arms and the "no flex" urethane rear wheels are highlighted. A textual note clarifies that footrests/legrests are not included with this specific listing.

2.4 Footrests/Legrests

Please note that front riggings (footrests/legrests) are not included with this specific wheelchair model and must be acquired separately if needed. The wheelchair is equipped with quick-release brackets for easy attachment of compatible Invacare legrests or footrests without tools.

3. Obsluha invalidního vozíku

Proper operation ensures safety and comfort for the user.

3.1 Self-Propelling

Users can propel the wheelchair by grasping the handrims on the large rear wheels and pushing forward. The durable handrims provide a good grip for efficient movement.

3.2 Using the Wheel Locks

Always engage the wheel locks when the wheelchair is stationary, especially during transfers or when parking on an incline. To engage, push the lock levers forward until they firmly secure the wheels. To release, pull the levers back.

3.3 Assisting a User

When pushing the wheelchair, use the padded handles located on the back of the chair. Ensure the user's feet are properly positioned on the footrests (if installed) and that the wheel locks are disengaged before moving.

3.4 přestupy

The removable full-length padded armrests can be helpful during transfers. They provide a stable leverage point for users when moving to or from another chair or bed. Ensure wheel locks are engaged before attempting any transfer.

4. Údržba a péče

Regular maintenance will extend the life and ensure the safe operation of your Invacare Tracer EX2 wheelchair.

4.1 Čištění

• Rám: Otřete rám z uhlíkové oceli reklamouamp hadříkem a jemným čisticím prostředkem. Důkladně osušte.
• Čalounictví: The dual-embossed vinyl seat and back can be cleaned with a damp hadříkem a jemným mýdlem. Vyhněte se agresivním chemikáliím, které by mohly materiál poškodit.
• kola: Clean the urethane tires and wheels regularly to remove dirt and debris.

4.2 inspekcí

Pravidelně kontrolujte následující součásti:

• Rám: Check for any signs of damage, cracks, or loose connections. The 14-gauge cross braces contribute to the wheelchair's structural integrity.
• Kola a pneumatiky: Ensure tires are free from excessive wear and that wheels spin freely without wobbling.
• Zámky kol: Verify that wheel locks engage securely and hold the wheels firmly.
• Područky: Check that armrests are securely attached and padding is intact.
• Spojovací materiál: Ensure all bolts, screws, and fasteners are tight. Do not overtighten.

Popis obrázku: A zadní view of the Invacare Tracer EX2 wheelchair. The image highlights the durable frame, constructed from heavy-duty carbon steel, capable of supporting up to 250 lbs. It also showcases the dual-embossed padded vinyl seat and back upholstery.

5. Řešení problémů

This section addresses common issues you might encounter with your wheelchair.

5.1 Wheelchair Does Not Roll Smoothly

• Zkontrolujte překážky: Ensure no debris is caught in the wheels or casters.
• Kontrola kol: Verify that the wheels are properly aligned and not bent.
• Axle Adjustment: Confirm that the dual-axle is correctly set and secured on both sides.

5.2 Wheel Locks Not Engaging Properly

• Adjust Locks: The wheel locks may need adjustment. Consult a qualified technician if you are unsure how to adjust them.
• Zkontrolujte opotřebení: Check the lock mechanisms for wear or damage.

5.3 Obtíže se skládáním/rozkládáním

• Jasné překážky: Ensure no items are preventing the frame from collapsing or expanding fully.
• Mazání: Moving parts of the folding mechanism may require light lubrication.

Popis obrázku: Strana view of the Invacare Tracer EX2 wheelchair shown in its folded configuration. The image highlights its compact 13-inch folded width, designed for convenient travel and storage. Text also indicates that this standard wheelchair weighs 36 lbs without legrests.

If you experience persistent issues not covered here, please contact Invacare customer support.

6. Specifikace

7. Záruka a podpora

Invacare is committed to providing quality products. For specific warranty details regarding your Tracer EX2 wheelchair, please refer to the documentation included with your purchase or contact Invacare directly.

Zákaznická podpora:

If you have questions, require assistance, or need to report an issue, please contact Invacare customer service:

• Telefon: 1 (800) 333-6900
• Webmísto: www.invacare.com (for general information and product support)