ECHOGEAR In-Wall Cable Management Kit

Zavedení

The ECHOGEAR In-Wall Cable Management Kit is designed to safely and efficiently conceal power and low-voltage cables behind your wall-mounted television or other electronic devices. This kit provides a clean, professional appearance by eliminating visible wires, while ensuring electrical safety with ETL In-Wall Certification. It is suitable for DIY installation and includes all necessary components for a streamlined setup.

Obraz: Before and after installation of the ECHOGEAR In-Wall Cable Management Kit, demonstrating how it eliminates visible cables for a cleaner setup.

Důležité bezpečnostní informace

Please read all instructions carefully before installation. Failure to follow these instructions may result in property damage, personal injury, or voiding of your warranty.

• Always ensure power is disconnected from the area where you are working before beginning installation.
• Use appropriate personal protective equipment, including safety glasses.
• Verify that there are no electrical wires, plumbing, or other obstructions behind the wall in the intended installation area. A stud finder is highly recommended.
• This kit is ETL In-Wall Certified for safety. Do not modify any components.
• Ensure at least 2.5 inches of clear space behind your drywall for proper module installation.
• Do not overload the electrical extension cord. Refer to local electrical codes for maximum load capacity.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1x Upper Power Module: For the top hole behind your TV.
• 1x Lower Power Module: For the bottom hole near an outlet.
• 1x 6ft Extension Cord: Connects the upper and lower modules.
• 1x Drywall Hole Saw Attachment: For cutting the correct size holes.
• 1x Driver Bit: For securing the modules.
• Návod k použití: Tento dokument.

Obraz: A visual representation of all items included in the ECHOGEAR In-Wall Cable Management Kit.

Průvodce instalací

This section provides step-by-step instructions for installing your ECHOGEAR In-Wall Cable Management Kit. A standard drill and stud finder are recommended tools not included in the kit.

Požadované nástroje (nejsou součástí dodávky):

• Elektrická vrtačka
• Vyhledávač cvočků
• Tužka
• Měřicí páska

Step 1: Plan Your Installation Location

Identify the ideal locations for the upper and lower modules. The upper module should be behind your TV, and the lower module near an existing power outlet. Ensure there are no studs, pipes, or electrical wires in the path between the two desired hole locations. Use a stud finder to locate studs and mark them. The modules can be placed up to 5 feet apart.

Obraz: Module dimensions and plug compatibility. Ensure sufficient space behind the wall.

Step 2: Cut the Holes

Attach the provided hole saw attachment to your electric drill. Carefully drill the first hole at your marked upper location. Repeat for the lower location. Ensure the holes are clean and free of debris.

Obraz: Using the included hole saw to cut the necessary openings in the drywall.

Krok 3: Nasměrujte kabely

Feed the 6ft extension cord through the upper hole and down through the wall cavity to the lower hole. You may need to use a fish tape or a weighted string to guide the cord. Once the extension cord is routed, you can also feed your low-voltage cables (HDMI, Ethernet, etc.) through the same path.

Obraz: Cables neatly routed through the in-wall module.

Krok 4: Nainstalujte moduly

Connect the female end of the 6ft extension cord to the upper power module. Insert the upper module into the top hole. The module features locking wings that secure it firmly to the drywall. Use the provided driver bit with your drill to tighten the screws, which will extend the wings and lock the module in place.

Repeat this process for the lower module, connecting the male end of the 6ft extension cord to it. Ensure both modules are flush with the wall surface and securely fastened.

Obraz: The locking wings on the module ensure a secure fit within the wall.

Obraz: Step-by-step visual guide for the DIY-friendly installation.

Krok 5: Připojte se k napájení

Plug your TV's power cord into the upper power module. Plug the lower power module into a standard wall outlet. Your installation is now complete.

Operace

Once installed, the ECHOGEAR In-Wall Cable Management Kit operates as a pass-through system for your cables. Simply plug your TV's power cord into the upper module's integrated outlet and route your low-voltage cables (HDMI, optical, Ethernet, etc.) through the designated opening. The lower module connects to a standard wall outlet, providing power to the upper module.

To add or remove cables, gently feed them through the opening in the modules. The flexible design accommodates multiple cables, including up to four large braided HDMI cables.

Údržba

The ECHOGEAR In-Wall Cable Management Kit requires minimal maintenance. Periodically check the modules to ensure they remain securely fastened to the wall. If the modules become loose, gently tighten the screws on the locking wings until they are snug.

Clean the visible surfaces of the modules with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.

Odstraňování problémů

Specifikace

Zákaznická podpora

For technical assistance, installation questions, or any other inquiries, please contact ECHOGEAR customer support. Our team is available 7 days a week to provide assistance.

Kontaktní údaje:

• Refer to the contact details provided on the product packaging or the official ECHOGEAR webmísto.
• Online support resources may also be available.