1. Úvod
The TrustFire J18 LED Flashlight is a high-performance illumination device designed for various applications. This manual provides essential instructions for safe and effective use, setup, operation, and maintenance of your J18 flashlight. Please read this manual thoroughly before using the product.
2. Bezpečnostní informace
- Bezpečnost očí: Nesvíťte baterkou přímo do očí. Vysoká intenzita světla může způsobit dočasné zhoršení zraku nebo trvalé poškození.
- Děti: Uchovávejte baterku a baterie mimo dosah dětí.
- Použití baterie: Use only recommended 18650 or 26650 rechargeable lithium-ion batteries. Ensure correct polarity during installation. Do not mix old and new batteries, or batteries of different types or brands.
- Teplo: The flashlight head may become hot during prolonged use, especially on high brightness modes. Exercise caution to prevent burns.
- Voděodolnost: The J18 flashlight is water resistant (IPX4 rated), meaning it can withstand splashes and light rain. It is ne určené pro ponoření do vody.
- Demontáž: Do not attempt to disassemble the flashlight head or other sealed components, as this may void the warranty and cause damage.
3. Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- TrustFire J18 LED Flashlight
- Extension Tube (for 3-battery configuration)
- Náhradní O-kroužky
Poznámka: Baterie nejsou součástí balení a je nutné je zakoupit samostatně.
4. Konec produktuview
The TrustFire J18 features a robust aluminum alloy construction and multiple lighting modes for versatility.
Klíčové vlastnosti:
- Vysoký jas: Up to 8000 lumens output from 7 LEDs.
- Více režimů: High, Medium, Low, Strobe, and SOS.
- Odolná konstrukce: Made from aircraft-grade aluminum alloy.
- Voděodolný: IPX4 rated for protection against splashing water.
- Flexibilní výkon: Compatible with 2 or 3 18650/26650 batteries.
Komponenty:
The flashlight consists of several main parts:
- Hlava: Contains the 7 LEDs and reflector.
- Trubice těla: Main housing for batteries. An extension tube can be added.
- Ocasní víčko: Contains the power switch.

Obrázek: Rozložený view showing the flashlight head, body tube, extension tube, and tail cap.
5. Nastavení
Instalace baterie:
The J18 flashlight can operate with either two or three 18650/26650 batteries. Ensure batteries are fully charged before installation.
- Unscrew the tail cap from the body of the flashlight.
- If using three batteries, screw the extension tube onto the main body tube.
- Insert the 18650 or 26650 batteries into the body tube with the positive (+) end facing towards the flashlight head. Ensure correct polarity.
- Screw the tail cap back onto the body tube securely.

Image: Visual guide demonstrating the assembly of the flashlight body and battery insertion.

Image: Comparison of flashlight length with two and three 18650 battery configurations, showing dimensions.
6. Návod k obsluze
Zapnutí/vypnutí:
To turn the flashlight on or off, firmly press the switch located on the tail cap until it clicks.
Přepínání režimů:
The J18 flashlight features 5 lighting modes: High, Medium, Low, Strobe, and SOS.
- S rozsvícenou baterkou on, lightly press the tail cap switch (without clicking) to cycle through the modes.
- Alternatively, a quick twist of the flashlight head may also cycle through modes on some versions.
- The flashlight will typically remember the last used mode when turned off and on again.

Image: Illustration of the five distinct lighting modes and the location of the tail cap switch.
7. Údržba
Čištění:
- Otřete tělo svítilny měkkým hadříkemamp tkanina.
- Do not use abrasive cleaners or harsh chemicals, as these can damage the finish or internal components.
- Pro optimální světelný výkon udržujte objektiv čistý. V případě potřeby použijte hadřík na čištění objektivů.
O-kroužky:
- Periodically inspect the O-rings for wear or damage.
- Lubricate O-rings with silicone grease to maintain water resistance.
- Replace damaged O-rings with the provided spares or suitable replacements.
Péče o baterii a její skladování:
- Pokud svítilnu nebudete delší dobu používat, vyjměte z ní baterie, abyste zabránili vytečení.
- Baterie skladujte na chladném a suchém místě.
- Recharge batteries regularly to maintain their lifespan.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítilna se nezapne | Low or depleted batteries Nesprávná instalace baterie Uvolněné spoje Špinavé kontakty | Nabijte nebo vyměňte baterie Ensure correct polarity (+/-) Tighten all parts securely Očistěte kontakty baterie vatovým tamponem |
| Světlo bliká nebo je slabé | Nízké nabití baterie Uvolněné spoje Špinavé kontakty | Nabijte baterie Tighten all parts securely Vyčistěte kontakty baterie |
| Flashlight gets excessively hot | Prolonged use on High mode Vysoká okolní teplota | Přepněte do režimu nižšího jasu Nechte baterku vychladnout |
| Vniknutí vody | Poškozené nebo špatně usazené O-kroužky Submersion beyond IPX4 rating | Inspect and lubricate/replace O-rings Avoid submersion; the flashlight is water resistant, not waterproof |
9. Specifikace
| Funkce | Detail |
|---|---|
| Značka | TrustFire |
| Model | J18 |
| Světelný zdroj | 7x LED |
| Jas | Až 8000 světla |
| Světelné režimy | Vysoká, Střední, Nízká, Stroboskop, SOS |
| Materiál | Aircraft-grade Durable Aluminum Alloy |
| Zdroj napájení | Napájení z baterie |
| Typ baterie | 2 or 3 x 18650/26650 Lithium-Ion (not included) |
| svtage | 3.7 voltů |
| Voděodolnost | IPX4 (voděodolný) |
| Rozměry (cca) | 2.17 x 2.17 x 8.86 inches (55 x 55 x 225 mm with 2 batteries, 320mm with 3 batteries) |
| Hmotnost (přibližně) | 1.39 pounds (630g) without batteries |
10. Záruka a podpora
Informace o záruce:
Specific warranty details for the TrustFire J18 LED Flashlight may vary. Please refer to the warranty card included with your purchase or contact the seller/manufacturer directly for detailed warranty terms and conditions.
Zákaznická podpora:
If you encounter any issues or have questions regarding your TrustFire J18 LED Flashlight that are not covered in this manual, please contact TrustFire customer service or your authorized retailer for assistance. Provide your product model and purchase date when seeking support.



