Uživatelská příručka pro Konica Minolta Bizhub C364

1. Úvod

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Konica Minolta Bizhub C364 multifunction device. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení:

• Ujistěte se, že je zařízení umístěno na stabilním a rovném povrchu.
• Connect the device to a grounded power outlet with the correct voltage.
• Nezakrývejte ventilační otvory.
• Udržujte tekutiny mimo dosah zařízení.
• Do not attempt to service the device yourself. Refer to qualified service personnel.
• Avoid touching internal components, especially during operation or immediately after use, as some parts may be hot.

3. Součásti produktu a dalšíview

Familiarize yourself with the main parts of your Bizhub C364 device.

Obrázek 3.1: Přední view of the Konica Minolta Bizhub C364 multifunction printer, showing the main unit, automatic document feeder, control panel, and paper trays.

3.1 Ovládací panel

Obrázek 3.2: Detailní záběr view of the Bizhub C364 control panel, featuring a large color touchscreen display, physical buttons for Power, Fax/Scan, Copy, 10-Keypad, Start, Stop, and Reset, and status indicators.

The control panel is your primary interface for operating the device. It features a large touchscreen display for navigating menus and settings, along with dedicated buttons for common functions.

3.2 Automatic Document Feeder (ADF)

Obrázek 3.3: View of the Automatic Document Feeder (ADF) on top of the Bizhub C364, showing the input tray for multiple pages and the document guides.

The ADF allows you to automatically feed multiple pages for copying, scanning, or faxing without placing each page individually on the scanner glass.

3.3 Scanner Glass

Obrázek 3.4: The scanner glass of the Bizhub C364, revealed by lifting the ADF cover. This area is used for scanning single pages or delicate documents.

Use the scanner glass for single pages, books, or delicate documents that cannot be fed through the ADF.

3.4 Output Tray / Finisher

Obrázek 3.5: Strana view of the Bizhub C364 showing the output tray, where printed or copied documents are collected.

Finished documents are delivered to the output tray. Depending on your configuration, an optional finisher may provide stapling or sorting capabilities.

4. Nastavení

4.1 Vybalení a umístění

1. Opatrně vyjměte zařízení z obalu.
2. Place the Bizhub C364 on a sturdy, level surface capable of supporting its weight. Ensure adequate space around the device for ventilation and access to paper trays and maintenance areas.
3. Odstraňte všechny ochranné pásky a balicí materiály z vnější i vnitřní strany zařízení.

4.2 Připojení napájení

1. Connect the power cord to the power inlet on the rear of the device.
2. Zapojte druhý konec napájecího kabelu do uzemněné elektrické zásuvky.
3. Press the power button, typically located on the control panel, to turn on the device.

4.3 Initial Configuration and Driver Installation

1. Follow the on-screen prompts on the control panel for initial setup, including language, date, and time settings.
2. For network connectivity, connect an Ethernet cable to the device's LAN port and configure network settings (IP address, subnet mask, gateway) via the control panel or web rozhraní.
3. To enable printing and scanning from a computer, install the appropriate drivers. Drivers can typically be found on the Konica Minolta support webmísto.
4. For USB connection, connect a USB cable from the device to your computer. Install necessary drivers as prompted by your operating system.

5. Návod k obsluze

5.1 Vkládání papíru

The Bizhub C364 features four paper drawers. Ensure paper is loaded correctly for optimal performance.

1. Pull out the desired paper drawer until it stops.
2. Upravte vodítka papíru tak, aby odpovídala formátu vkládaného papíru.
3. Load the paper stack with the print side facing up (or as indicated by the tray diagram). Do not overfill the tray beyond the maximum fill line.
4. Gently push the paper drawer back into the device until it clicks into place.
5. V případě potřeby potvrďte na ovládacím panelu velikost a typ papíru.

5.2 Kopírování dokumentů

1. Place your original document(s) face up in the Automatic Document Feeder (ADF) or face down on the scanner glass.
2. Na ovládacím panelu stiskněte tlačítko Kopie tlačítko.
3. Adjust settings such as quantity, color mode (color/black & white), duplex (two-sided), and zoom using the touchscreen.
4. Stiskněte tlačítko Start tlačítko pro zahájení kopírování.

5.3 Tisk dokumentů

1. Ensure the device is connected to your computer via USB or network and that drivers are installed.
2. Otevřete dokument, který chcete vytisknout, v počítači.
3. Vybrat Vytisknout z nabídky aplikace.
4. Choose the Konica Minolta Bizhub C364 as your printer.
5. Adjust print settings (e.g., paper source, color, duplex, number of copies) as needed.
6. Klikněte Vytisknout to send the job to the device.

5.4 Skenování dokumentů

1. Place your original document(s) in the ADF or on the scanner glass.
2. Na ovládacím panelu stiskněte tlačítko Fax/Scan button, then select the Scan function.
3. Choose your desired scan destination (e.g., email, network folder, USB drive) and adjust scan settings (e.g., resolution, color mode, file formát).
4. Stiskněte tlačítko Start tlačítko pro zahájení skenování.

5.5 Faxování dokumentů

1. Place your original document(s) in the ADF or on the scanner glass.
2. Na ovládacím panelu stiskněte tlačítko Fax/Scan button, then select the Fax function.
3. Enter the recipient's fax number using the 10-keypad or select from the address book.
4. Upravte všechna potřebná nastavení faxu.
5. Stiskněte tlačítko Start tlačítko pro odeslání faxu.

6. Údržba

6.1 Postupy čištění

• Vnější: Vnější povrchy otřete měkkým, damp, hadřík, který nepouští vlákna. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Sklo skeneru: Gently clean the scanner glass and the underside of the ADF with a soft, lint-free cloth dampened with glass cleaner. Ensure no residue remains.
• Válečky ADF: Pravidelně čistěte válečky ADF hadříkem, který nepouští vlákna.ampened with isopropyl alcohol to prevent paper feed issues.

6.2 Výměna spotřebního materiálu

The device will display messages on the control panel when consumables such as toner cartridges or the waste toner bottle need replacement. Refer to the on-screen instructions for specific replacement procedures.

• Tonerové kazety: Replace empty toner cartridges with genuine Konica Minolta cartridges to ensure optimal print quality and device longevity.
• Waste Toner Bottle: Replace the waste toner bottle when prompted to prevent toner overflow.

7. Řešení problémů

This section addresses common issues you may encounter. For more complex problems, contact customer support.

• Zaseknutý papír: Follow the on-screen instructions to locate and clear paper jams. Always turn off the device before clearing jams if instructed.
• Špatná kvalita tisku: Check toner levels, clean the print heads (if applicable), and ensure you are using appropriate paper types and settings.
• Zařízení nereaguje: Check power connections, ensure the device is turned on, and verify network or USB connections. Restarting the device may resolve temporary issues.
• Problémy s připojením k síti: Verify network cable connection, check IP address settings, and ensure the device is visible on the network. Consult your network administrator if necessary.

8. Technické specifikace

9. Záruka a podpora

This Konica Minolta Bizhub C364 device comes with a 90denní omezená záruka. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please refer to your purchase documentation or contact the seller directly.

For additional resources, including updated drivers and detailed troubleshooting guides, visit the official Konica Minolta support webmísto.