MOOG 512593 Wheel Bearing and Hub Assembly

1. Konec produktuview

The MOOG 512593 Wheel Bearing and Hub Assembly is engineered for superior performance and durability in a wide range of foreign and domestic vehicles. Designed with advanced features, this assembly ensures longer life, smoother operation, and optimal ABS performance, providing a reliable solution for your vehicle's wheel system.

Obrázek 1: Přední strana view of the MOOG 512593 Wheel Bearing and Hub Assembly.

Obrázek 2: Strana view of the MOOG 512593 Wheel Bearing and Hub Assembly, showing the mounting flange and studs.

Obrázek 3: Zadní view of the MOOG 512593 Wheel Bearing and Hub Assembly, highlighting the bearing and ABS sensor connection.

2. Kompatibilita

This MOOG 512593 Wheel Bearing and Hub Assembly is compatible with the following vehicle models:

• Buick Enclave, ročník 2018–2022
• 2017-2022 Cadillac XT5
• 2020-2022 Cadillac XT6
• 2018-2022 Chevrolet Traverse
• GMC Acadia 2017-2022

Důležité: Před nákupemasing, ensure this part fits your specific vehicle. Verify all vehicle information (year, make, model, engine, and trim) for compatibility and check any qualifier notes.

3. Klíčové vlastnosti

The MOOG 512593 Hub Assembly incorporates several design enhancements for improved performance and longevity:

• Innovative Roll Form Design: Ensures consistent and optimal preload for reliable operation.
• Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements, delivering superior performance and minimizing noise and vibration.
• Enhanced Sealing: Engineered with improved seals to protect against premature wear and lubricant breakdown, even in harsh conditions. This includes:
  • Molded grommet to protect ABS functionality.
  • Improved quad-lip inboard seal.
  • Improved 3-lip primary outboard seal.
  • Grime Defense outboard seal.
• Abrasion-Resistant ABS Cord: Designed for durability and reliable ABS signal transmission.
• Wheel Studs with Protective Coating: Provides added corrosion resistance and longevity.

Figure 4: Diagram illustrating key features of the MOOG Hub Assembly, including the ABS cord, roll form design, quad lip seal, precision matched components, and protective coating on wheel studs.

Obrázek 5: Průřez view of a bearing, highlighting the internal components and precision matching.

4. Instalační příručka

Installation of the MOOG 512593 Wheel Bearing and Hub Assembly should be performed by a qualified technician using appropriate tools and safety procedures. Refer to your vehicle's specific service manual for detailed, step-by-step instructions.

Obecné kroky (podrobnosti naleznete v servisní příručce vozidla):

1. Bezpečně zvedněte a podepřete vozidlo.
2. Remove the wheel and brake caliper assembly.
3. Disconnect the ABS sensor wire (if applicable).
4. Remove the old hub assembly.
5. Důkladně očistěte montážní povrch.
6. Install the new MOOG 512593 Hub Assembly, ensuring proper alignment.
7. Reconnect the ABS sensor wire.
8. Reinstall the brake caliper assembly and wheel.
9. Torque all fasteners to manufacturer specifications.
10. Lower the vehicle and perform a test drive to ensure proper function.

Figure 6: Illustration of a hub assembly's location within a vehicle's suspension system.

5. Provozní aspekty

Once installed, the MOOG 512593 Wheel Bearing and Hub Assembly operates as an integral part of your vehicle's wheel and braking system. No specific user operation is required beyond normal vehicle use. However, it is crucial to be aware of potential symptoms that may indicate an issue with the hub assembly.

6. Údržba

The MOOG 512593 Wheel Bearing and Hub Assembly is designed for maintenance-free operation. Regular inspection of your vehicle's suspension and wheel components during routine service is recommended to identify any signs of wear or damage early. Pay attention to:

• Unusual noises (grinding, humming, roaring) from the wheels.
• Vibration felt through the steering wheel or floorboard.
• Loose steering or poor handling.
• Nerovnoměrné opotřebení pneumatik.
• Illumination of the ABS warning light.

If any of these symptoms are observed, have your vehicle inspected by a qualified technician promptly.

7. Řešení problémů

Common symptoms of a failing wheel bearing and hub assembly include:

Symptom 1: Noise (e.g., grinding, humming, roaring) that changes with vehicle speed or turning.

Symptom 2: Vibration felt in the steering wheel, floorboard, or seat.

Symptom 3: ABS warning light illumination (due to sensor issues or damage).

Symptom 4: Uneven or abnormal tire wear.

If you experience any of these symptoms, it is recommended to have your vehicle inspected by a certified mechanic to diagnose and address the issue.

8. Specifikace

9. Co je v krabici

The MOOG 512593 Wheel Bearing and Hub Assembly package includes:

• 1 x Wheel Bearing and Hub Assembly

10. Záruka a podpora

For warranty information and technical support regarding your MOOG 512593 Wheel Bearing and Hub Assembly, please refer to the official MOOG webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

You can visit the official MOOG Store for more information: MOOG Store on Amazon