1. Úvod
Thank you for choosing the DALI Oberon 7 Floorstanding Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your speaker to ensure optimal audio performance and longevity. The Oberon 7 is designed to deliver a dynamic and powerful audio experience, featuring dual 7-inch wood fiber woofers for deep bass and a precision-coated soft dome tweeter for clear highs.
2. Bezpečnostní informace
- Umístění: Position speakers on a stable, level surface to prevent tipping. Ensure adequate ventilation around the speakers.
- Moc: Připojujte reproduktory pouze k vhodnému audio amplification equipment. Do not exceed the recommended power handling capacity.
- vlhkost: Keep speakers away from water, moisture, and high humidity. Do not expose to dripping or splashing.
- Teplo: Avoid placing speakers near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
- Čištění: Před čištěním odpojte přístroj od napájení. Použijte měkký, suchý hadřík. Nepoužívejte tekuté ani aerosolové čisticí prostředky.
- Servis: Nepokoušejte se tento výrobek opravit sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
3. Obsah balení
Carefully unpack your DALI Oberon 7 speaker and verify that all components are present:
- DALI Oberon 7 Floorstanding Speaker (single unit)
- Mřížka
- Gumové nohy
- Hroty
- Uživatelská příručka (tento dokument)

Image: The DALI Oberon 7 Floorstanding Speaker with its protective grille attached, showcasing jeho elegantním designem.
4. Nastavení
4.1 Attaching Feet/Spikes
For optimal stability and vibration isolation, attach the included rubber feet or spikes to the bottom of the speaker. Rubber feet are suitable for hard floors, while spikes are recommended for carpeted surfaces to couple the speaker firmly to the subfloor.
4.2 Umístění reproduktorů
Proper speaker placement is crucial for achieving the best sound quality. Consider the following guidelines:
- Stereo nastavení: For a stereo pair, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
- Vzdálenost od zdí: Experiment with placing the speakers a short distance from the rear and side walls. This can affect bass response and soundstaghloubka e.
- Sbíhavost: Slightly angle the speakers inward towards the listening position (toe-in) to optimize imaging and soundstage zaměření.

Image: A DALI Oberon 7 speaker placed in a typical living room setup, demonstrating ideal positioning next to a media console.
4.3 Připojení k Ampzvedák/přijímač
The DALI Oberon 7 features gold-plated terminals for secure and reliable connections. Use high-quality speaker cables for the best audio transmission.
- Ujistěte se, že vaše ampje lifter/přijímač vypnutý a odpojený od elektrické zásuvky.
- Připojte kladný (+) pól (červený) na reproduktoru ke kladnému (+) pólu na vašem ampživější.
- Připojte záporný (-) pól (černý) na reproduktoru k zápornému (-) pólu na vašem ampživější.
- Ujistěte se, že všechna připojení jsou pevná a bezpečná, abyste zabránili ztrátě signálu nebo zkratu.

Image: The rear panel of the DALI Oberon 7 speaker, highlighting the gold-plated speaker terminals and the bass reflex port.
5. Provoz
Once your DALI Oberon 7 speakers are properly set up and connected to your amplifier/receiver, you can begin enjoying your audio. The Oberon 7 incorporates DALI's advanced driver technology, including the patented SMC (Soft Magnetic Compound) in the magnet motor system, which reduces distortion for improved clarity and dynamic range.
- Zapněte svůj amplifier/receiver and select the appropriate audio source.
- Start playback at a low volume level.
- Gradually increase the volume to your desired listening level.
- Allow for a 'break-in' period: Like many high-fidelity speakers, the Oberon 7 may benefit from a period of use (typically 50-100 hours) to allow the drivers to fully settle and achieve their optimal sound characteristics.

Image: The DALI Oberon 7 speaker with its grille removed, revealing the two 7-inch wood fiber woofers and the soft dome tweeter.
6. Údržba
To maintain the aesthetic and acoustic performance of your DALI Oberon 7 speakers, follow these simple maintenance guidelines:
- Čištění skříněk: Use a soft, dry, lint-free cloth to gently wipe the cabinet surfaces. For stubborn marks, a slightly damp Lze použít hadřík a ihned poté suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Čištění mřížek: The fabric grilles can be carefully removed and gently vacuumed with a soft brush attachment to remove dust.
- Péče o řidiče: Avoid touching the speaker drivers (woofers and tweeter) as this can cause damage. Keep them free from dust and debris.
- Vystavení slunečnímu světlu: Prolonged exposure to direct sunlight can cause discoloration of the cabinet finish. Position speakers to minimize direct sun exposure or use curtains/blinds.

Image: A detailed close-up of the DALI Oberon 7's tweeter and one of its wood fiber woofers, showcasing the driver construction.
7. Řešení problémů
If you encounter issues with your DALI Oberon 7 speakers, refer to the following common troubleshooting steps:
- Žádný zvuk:
- Zkontrolujte všechna připojení kabelů reproduktorů jak na reproduktoru, tak na amplifier ends. Ensure they are secure and correctly connected (positive to positive, negative to negative).
- Ověřte, že ampje přijímač/zařízení zapnuté a je vybrán správný vstupní zdroj.
- Zkontrolujte úroveň hlasitosti na vašem ampzvlhčovač/přijímač.
- Zkreslený zvuk:
- Snižte hlasitost na vašem ampzesilovač/přijímač. Přebuzení reproduktorů může způsobit zkreslení.
- Inspect speaker cables for any damage or frayed wires that might be causing a short circuit.
- Zajistěte ampVýstupní výkon reproduktoru Liferier odpovídá doporučenému výkonu reproduktoru.
- Nevyvážený zvuk (jeden reproduktor hlasitější/tišší):
- Zkontrolujte nastavení vyvážení na svém ampzvlhčovač/přijímač.
- Verify that both speakers are connected correctly and securely.
- Ensure both speakers are receiving a signal from the ampživější.
If these steps do not resolve the issue, please contact your DALI retailer or authorized service center.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Název modelu | Oberon 7 |
| Číslo modelu položky | 230073 |
| Značka | DALI |
| Typ reproduktoru | Floorstanding, Surround Sound, Woofer |
| Speciální funkce | Zvuk ve vysokém rozlišení |
| Doporučená použití | Pro hudební přehrávače |
| Kompatibilní zařízení | Domácí kino |
| Průměr basového reproduktoru | 7 palce (x2) |
| Konfigurace kanálů prostorového zvuku | 2.0 |
| Barva | Černý |
| Rozměry produktu (D x Š x V) | 13"H x 40"Š x 8"V |
| Hmotnost položky | 32.6 liber (14.8 kilogramů) |
| Maximální výstupní výkon reproduktoru | 180 wattů |
| Technologie připojení | RCA, XLR (via ampživější) |
| Režim zvukového výstupu | Surround |
| Typ montáže | Stojící na podlaze |
| Materiál | Dřevo |
| UPC | 680140965492 |
9. Záruka a podpora
The DALI Oberon 7 Floorstanding Speaker comes with a Limited Warranty. Please refer to the warranty documentation provided with your purchase for specific terms and conditions.
For technical support, service, or warranty claims, please contact your authorized DALI retailer or visit the official DALI webwebu. Více informací naleznete také na DALI Brand Store on Amazon.





