Návod k obsluze letounu E-flite Viper 70mm EDF Jet EFL7750

1. Úvod

The E-flite Viper 70mm EDF Jet is designed to provide a high-performance jet experience with the stability of a low-wing sport airplane. This model is suitable for both experienced jet pilots and those new to EDF jets, offering incredible speed, vertical performance, and aerobatic capabilities. It features exclusive AS3X and SAFE Select technologies for enhanced flight stability and ease of control.

This manual provides essential information for the assembly, operation, and maintenance of your E-flite Viper 70mm EDF Jet. Please read it thoroughly before operating the aircraft to ensure safe and optimal performance.

E-flite Viper 70mm EDF Jet in flight, side view

Image 1.1: The E-flite Viper 70mm EDF Jet, showcasing its sleek design and livery.

2. Bezpečnostní pokyny

Operating a remote-controlled aircraft requires caution and adherence to safety protocols. Failure to operate this product safely and responsibly could result in injury or damage to the product or property.

Přečtěte si celý manuál: Familiarize yourself with the product features and operating requirements before use.
Operate in Open Areas: Always fly in open spaces away from people, vehicles, and buildings. Avoid flying near power lines or busy roads.
Bezpečnost baterie: Use only recommended batteries and chargers. Always handle LiPo batteries with extreme care. Never leave charging batteries unattended. Disconnect the battery when not in use.
Fan Safety: Keep hands, face, and loose clothing away from the rotating fan unit. The fan can cause severe injury.
Předletové kontroly: Before each flight, ensure all control surfaces move correctly, the battery is fully charged and secured, and the transmitter is properly bound and functioning.
Povětrnostní podmínky: Nelétejte za silného větru, deště nebo jiných nepříznivých povětrnostních podmínek.
Doporučený věk: This product is not a toy. It is intended for experienced RC pilots.

3. Co je zahrnuto

The E-flite Viper 70mm EDF Jet (EFL7750) is a Bind-N-Fly (BNF) Basic model. This means the aircraft comes largely pre-assembled with essential electronics installed, but requires additional components for flight.

Zahrnuté komponenty:

E-flite Viper 70mm EDF Jet Airframe
70mm EDF (Electric Ducted Fan) unit with 12-blade fan
6S-compatible brushless motor
70-amp Elektronický regulátor otáček (ESC)
Digital, metal-geared servos (factory-installed)
Electric retracts (factory-installed)
Functional flaps (factory-installed)
AS3X and SAFE Select technologies receiver

Required for Completion (Not Included):

Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
6S 22.2V LiPo flight battery (recommended 3200-4000mAh, 30C minimum)
Compatible LiPo charger

4. Nastavení a montáž

The Viper 70mm EDF Jet is designed for quick and straightforward assembly, requiring no glue.

4.1 Wing and Stabilizer Installation

The aircraft features a one-piece wing and stabilizers that bolt into place. Carefully align the wing with the fuselage and secure it using the provided screws. Repeat this process for the horizontal stabilizers, ensuring they are correctly oriented.

Close-up of the E-flite Viper wing and landing gear

Image 4.1: Detail of the wing and main landing gear assembly.

Zadní view of the E-flite Viper tail section and wing

Obrázek 4.2: Zadní strana view showing the horizontal stabilizers and wing attachment points.

4.2 Vazba vysílače

As a BNF Basic model, the aircraft requires binding to a compatible Spektrum DSMX/DSM2 transmitter. Refer to your transmitter's manual for specific binding procedures. Ensure the aircraft's receiver is in bind mode before initiating the binding process from your transmitter.

4.3 Instalace baterie

Access the battery compartment via the large top-mounted hatch. Secure the recommended 6S LiPo flight battery (3200-4000mAh) using the provided hook-and-loop straps. Ensure the battery is positioned to achieve the correct Center of Gravity (CG) as specified in the full product manual (available on the E-flite website). Incorrect CG can significantly affect flight performance.

4.4 Control Surface Checks

After binding and battery installation, perform a thorough control surface check. Power on your transmitter, then connect the flight battery. Verify that all control surfaces (ailerons, elevator, rudder, flaps) move freely and in the correct direction relative to your stick inputs. Adjust servo directions and throws on your transmitter as needed.

Close-up of the E-flite Viper cockpit with pilot figure

Obrázek 4.3: Detailní view of the cockpit, accessible via the top hatch for battery installation.

5. Návod k obsluze

The E-flite Viper 70mm EDF Jet offers a dynamic flying experience, enhanced by its integrated AS3X and SAFE Select technologies.

5.1 Předletové kontroly

Ensure all control surfaces are free and move correctly.
Verify the flight battery is fully charged and securely installed.
Confirm the transmitter battery is charged.
Check for any damage to the airframe, fan unit, or landing gear.
Proveďte kontrolu dosahu vašeho rádiového systému.

5.2 Vzlet

The Viper is designed for easy takeoffs. Position the aircraft on a smooth surface, facing into the wind if possible. Gradually advance the throttle to full power. The electric retracts will allow for a smooth roll-out. Apply slight up-elevator as the aircraft gains speed to lift off.

5.3 Letové vlastnosti

This jet delivers smooth, sport airplane-like handling combined with impressive speed and aerobatic capability. The 12-blade fan and 6S-compatible brushless motor provide significant thrust and a turbine-like sound. AS3X technology works behind the scenes to smooth out the effects of wind and turbulence, providing a locked-in feel. SAFE Select offers optional flight envelope protection, limiting pitch and bank angles and providing automatic self-leveling, making it ideal for less experienced jet pilots.

5.4 Přistání

Landing the Viper is straightforward, especially with the functional flaps and electric retracts. Extend the landing gear and deploy flaps on approach to reduce speed and increase lift. Maintain a controlled descent rate and aim for a smooth touchdown on the main gear, followed by the nose wheel.

6. Údržba

Regular maintenance ensures the longevity and performance of your E-flite Viper.

Kontrola po letu: After each flight, inspect the airframe for any damage, cracks, or loose components. Check all control linkages for free movement and secure connections.
Podvozek: The electric retracts are robust, but hard landings can potentially bend the landing gear struts. Inspect them regularly and gently bend them back into alignment if necessary to ensure proper retraction and extension.
Serva: The digital, metal-geared servos are durable. Check for any slop or unusual noise. Replace any damaged servos promptly.
Jednotka ventilátoru: Inspect the 70mm EDF unit for any debris or damage to the fan blades. Clear any obstructions to maintain optimal thrust and efficiency.
Péče o baterie: Store LiPo batteries at a storage charge (approximately 3.8V per cell) when not in use for extended periods. Never store fully charged or fully discharged LiPo batteries.
Čištění: Clean the airframe with a soft, damp cloth. Avoid using harsh chemicals that could damage the EPO foam.

7. Řešení problémů

This section addresses common issues you might encounter with your E-flite Viper 70mm EDF Jet.

Problém	Možná příčina	Řešení
Aircraft does not bind to transmitter.	Incorrect binding procedure; transmitter not in bind mode; receiver not in bind mode; incompatible transmitter.	Ensure both transmitter and receiver are in bind mode. Refer to both manuals. Verify transmitter compatibility (Spektrum DSMX/DSM2).
Control surfaces do not respond or move incorrectly.	Incorrect servo connections; reversed servo direction in transmitter; damaged servo or linkage; low receiver battery.	Check all servo connections. Correct servo directions in transmitter. Inspect servos and linkages for damage. Ensure flight battery is adequately charged.
Motor does not spin or spins intermittently.	Loose motor/ESC connection; damaged ESC or motor; low flight battery; throttle trim too high/low.	Check all power connections. Ensure flight battery is fully charged. Calibrate ESC throttle range. Lower throttle trim to minimum. If issues persist, inspect ESC and motor for damage.
Letadlo létá nepravidelně nebo je obtížné ho ovládat.	Incorrect Center of Gravity (CG); AS3X/SAFE Select not initialized; control surface trim issues; wind conditions.	Verify CG is correct. Ensure AS3X/SAFE Select initializes properly (aircraft must be still during power-up). Adjust trims as needed. Avoid flying in strong winds.
Landing gear does not retract/extend fully.	Bent strut; obstruction; servo issue; low voltage.	Inspect landing gear struts for bends and gently straighten if possible. Check for any debris obstructing movement. Ensure flight battery has sufficient voltage.
Smoke or burning smell from electronics.	Short circuit; overloaded ESC/motor; incorrect battery.	Immediately disconnect the flight battery. Do not attempt to operate the aircraft. Inspect all wiring and components for damage. Contact E-flite support for assistance. Ensure you are using the correct battery type and capacity.

8. Specifikace

Key technical specifications for the E-flite Viper 70mm EDF Jet (EFL7750):

Model: E-flite Viper 70mm EDF Jet
Číslo modelu: EFL 7750 XNUMX
Rozpětí křídel: 1100 mm (43.3 palce)
Délka: Approximately 1020mm (40.2 inches) (estimated, refer to full manual for exact dimensions)
EDF Unit: 70mm, 12-blade
Motor: 6S-compatible Brushless Outrunner
ESC: 70-amp
Serva: Digital, Metal-Geared
Přijímač: Spektrum AS3X/SAFE Select compatible
Doporučená baterie: 6S 22.2V 3200-4000mAh LiPo (30C minimum)
Materiál: EPO pěna
Rozměry produktu: 115.57 x 34.29 x 23.5 palce (rozměry balení/přepravy)

9. Záruka a podpora

For warranty information, technical support, or replacement parts, please contact E-flite customer service or visit the official E-flite webUschovejte si doklad o koupi pro případ reklamace.

E-Flite Webmísto: www.e-fliterc.com

Podpora Horizon Hobby: E-flite products are often supported by Horizon Hobby. Refer to their webstránky s kontaktními údaji a zdroji podpory.

	E-flite Viper 70mm EDF BNF Basic: Návod k obsluze a průvodce nastavením Komplexní návod k obsluze pro RC letadlo E-flite Viper 70mm EDF BNF Basic. Zahrnuje montáž, nastavení vysílače, bezpečnostní režim SAFE Select, instalaci baterií, řešení problémů a bezpečnost.
	Návod k obsluze RC letadla Horizon Hobby E-flite Viper 70mm EDF Tato komplexní instruktážní příručka poskytuje základní informace o RC letadle Horizon Hobby E-flite Viper 70mm EDF. Zahrnuje předletové kontroly, nastavení vysílače, sestavení modelu, letové operace, bezpečnostní opatření, řešení problémů a podrobnosti o záruce.
	Návod k obsluze E-flite Viper 70mm EDF Komplexní návod k obsluze RC letadla E-flite Viper 70mm EDF, zahrnující montáž, nastavení vysílače, tipy pro létání a řešení problémů.
	Návod k obsluze puškohledu Eflite Viper 70mm EDF Komplexní návod k obsluze RC letadla Eflite Viper 70mm EDF, který zahrnuje montáž, nastavení, provoz, bezpečnost a řešení problémů. Zahrnuje specifikace, seznamy dílů a informace o předpisech.
	Návod k obsluze E-flite Habu STS Komplexní průvodce montáží, nastavením a bezpečným provozem RC proudového letadla E-flite Habu STS 70mm EDF. Seznamte se s technologií SAFE Select, ovládacími prvky letu a předletovými kontrolami pro optimální zážitek z létání.
	UMX Viper 30mm EDF: Manuel d'utilisation and guidelines de securité Manuel d'utilisation détaillé pour l'avion radiocommandé E-flite UMX Viper 30mm EDF, včetně pokynů k sestavení, konfiguraci, objemu, údržbě a dépannage.

E-flite EFL7750