Konec produktuview
The Danfoss 067N6151 4TR Thermostatic Expansion Valve (TGE) is designed for precise control of refrigerant flow in various refrigeration and air conditioning systems. This bi-flow valve is suitable for R404A and R507A refrigerants and features a 1/2x7/8 inch solder ODF connection with a 1/4 inch externally equalized port. It operates within a temperature range of -40 to 50°F and has a maximum operating temperature of +210°F.
Image: Danfoss 4TR Thermostatic Expansion Valve, showing its main body, solder connections, and the coiled capillary tube with sensing bulb.
Klíčové vlastnosti
- Balance Port Design: Ensures stable operation across varying load conditions.
- Bi-flow Operation: Allows expansion in both directions, suitable for heat pump applications.
- Low Hysteresis: Provides accurate and responsive superheat control.
- Odolná konstrukce: Features a laser-welded, stainless steel power element, capillary tube, and bulb for extended lifetime.
- Straightway Flow: Optimized for efficient refrigerant passage.
- Adjustable Superheat Setting: Allows for fine-tuning of system performance.
- Certifikováno UL: Meets recognized safety and quality standards.
- High Operating Temperature: Capable of handling temperatures up to +210°F.
Aplikace
This expansion valve is suitable for a wide range of refrigeration and air conditioning systems, including but not limited to:
- Water Chillers
- Bus Air Conditioning Systems
- Střešní jednotky
- Tepelná čerpadla
- Refrigerated Containers
- Other A/C and Refrigeration Systems requiring precise refrigerant flow control.
Nastavení a instalace
Installation of the Danfoss TGE expansion valve should only be performed by qualified personnel with experience in refrigeration and HVAC systems. Ensure all local codes and regulations are followed.
- Bezpečnost především: Before beginning installation, ensure the system is depressurized and all power sources are disconnected. Wear appropriate personal protective equipment (PPE).
- Umístění ventilu: Install the valve in the liquid line immediately upstream of the evaporator. Ensure the flow direction matches the arrow on the valve body.
- Pájené spoje: Use appropriate brazing techniques for the 1/2x7/8 inch ODF solder connections. Protect the valve body from excessive heat during brazing to prevent internal damage.
- Equalizer Line: Connect the 1/4 inch external equalizer line to the suction line, typically downstream of the evaporator. This ensures proper sensing of evaporator pressure.
- Instalace snímací žárovky: Securely attach the sensing bulb to the suction line, close to the evaporator outlet. Ensure good thermal contact by cleaning the pipe surface and using a clamp or straps. Insulate the bulb to prevent ambient temperature interference.
- Kontrola těsnosti: After installation, perform a thorough leak check using an appropriate leak detection method.
- Evakuace a nabíjení: Evacuate the system to a deep vacuum and charge with the correct type and amount of R404A or R507A refrigerant as specified by the system manufacturer.
Provozní principy
The Danfoss TGE expansion valve regulates the flow of liquid refrigerant into the evaporator based on the superheat of the refrigerant vapor leaving the evaporator. The sensing bulb, filled with a charge, responds to the temperature of the suction line. Changes in suction line temperature cause the charge in the bulb to expand or contract, which in turn opens or closes the valve orifice, maintaining a constant superheat and ensuring efficient evaporator operation.
The bi-flow design allows the valve to function effectively in both heating and cooling modes, making it ideal for heat pump applications where the direction of refrigerant flow reverses.
Údržba
The Danfoss TGE expansion valve is designed for long-term reliability with minimal maintenance. However, periodic checks of the overall refrigeration system are recommended to ensure optimal performance.
- Superheat Verification: Periodically check the system's superheat to ensure it is within the manufacturer's recommended range. Adjust the valve's superheat setting if necessary (refer to system-specific guidelines).
- Detekce úniku: Regularly inspect all connections for signs of refrigerant leaks.
- Integrita snímací žárovky: Ensure the sensing bulb remains securely attached and insulated on the suction line.
- Čistota: Udržujte vnější povrch ventilu čistý a bez nečistot.
Odstraňování problémů
Common issues related to expansion valves often manifest as incorrect superheat or inefficient system operation. Always consult a qualified HVAC technician for diagnosis and repair.
| Příznak | Možná příčina | Akce |
|---|---|---|
| Vysoké přehřátí | Undercharge, restricted liquid line, valve stuck closed, incorrect superheat setting. | Check refrigerant charge, inspect liquid line filter/drier, verify valve operation, adjust superheat. |
| Low Superheat / Liquid Floodback | Overcharge, sensing bulb loose/uninsulated, valve stuck open, incorrect superheat setting. | Check refrigerant charge, re-secure/insulate sensing bulb, verify valve operation, adjust superheat. |
| Fluctuating Superheat | Improper bulb placement, unstable load, pressure drop issues. | Re-evaluate bulb placement, check system load stability, inspect for pressure drops. |
Note: These are general guidelines. Always refer to specific system diagnostics and safety procedures.
Specifikace
| Atribut | Detail |
|---|---|
| Číslo modelu | 067N6151 |
| Chladiva | R404A, R507A |
| Typ připojení | 1/2 x 7/8 inch Solder, ODF |
| Vyrovnání | 1/4 inch Externally Equalized |
| Směr toku | Obousměrný proud |
| Rozsah provozních teplot | -40 až 50 °F (-40 až 10 °C) |
| Maximální provozní teplota | + 210 ° F (+ 99 ° C) |
| Materiál | Stainless Steel (power element, capillary tube, bulb) |
| Rozměry (D x Š x V) | 5.25 x 4.25 x 3.25 palce |
| Hmotnost položky | 1.1 libry |
| Certifikace | Certifikováno UL |
| Nahrazuje modely | SSE-3, HFES-3.5S, 067N6151 |
Informace o záruce
Specific warranty details for the Danfoss 067N6151 expansion valve are typically provided at the point of purchase or can be obtained directly from Danfoss or an authorized distributor. Please retain your proof of purchase for warranty claims. General Danfoss product warranties usually cover defects in material and workmanship for a specified period from the date of purchase.
Podpora a kontakt
For technical support, installation assistance, or further inquiries regarding the Danfoss 067N6151 expansion valve, please contact Danfoss customer service or an authorized Danfoss distributor. You can find contact information on the official Danfoss webna vašem webu nebo prostřednictvím dodavatele produktu.
Danfoss Official Webmísto: www.danfoss.com
