Uživatelská příručka k pedálu TC Electronic Ditto JAM X2 Looper

Zavedení

Welcome to the user manual for the TC Electronic Ditto JAM X2 Looper Pedal. This intuitive looper pedal is designed for musicians seeking intelligent loop synchronization that responds to their band's rhythm. It features innovative BeatSense technology, allowing for automatic adjustment of loop tracks to your beat, and offers both Record-then-Play and Record-then-Overdub functionalities with unlimited overdubs and undo/redo capabilities. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Ditto JAM X2 Looper.

Obrázek: Přední strana view of the TC Electronic Ditto JAM X2 Looper Pedal, showcasing the 'LOOP LEVEL' knob, 'REC-DUB-PLAY' and 'REC-PLAY-DUB' switches, 'LOOP' and 'STOP' footswitches, and 'BEAT SENSE' indicator.

Klíčové vlastnosti

• Intuitive looper pedal with intelligent loop synchronization that responds to your band.
• Innovative responsive BeatSense technology automatically adjusts loop tracks to your beat.
• Choose between Record-then-Play or Record-then-Overdub functionalities.
• Unlimited overdubs and undo/redo for total creative freedom.
• Dual built-in mics accurately track band tempo by focusing only on rhythmic elements.

Obrázek: Detailní záběr view of the "BEAT SENSE" indicator on the pedal, highlighting its function.

Image: An external microphone, likely used for the BeatSense technology, clipped onto a drum kit component.

Nastavení

Napájení

The Ditto JAM X2 Looper requires a 9V power supply. Ensure you use a compatible power adapter (not included) to power the unit.

Spojení

• Připojte svůj nástroj (např. kytaru) k VSTUP jack pomocí standardního 1/4palcového nástrojového kabelu.
• Připojte VÝSTUP jack do vašeho amplifier or next pedal in the signal chain using a standard 1/4-inch instrument cable.
• An EXT MIC input is available for connecting an external microphone to enhance BeatSense accuracy, particularly in complex rhythmic environments.

Obrázek: Zadní view of the Ditto JAM X2 pedal, clearly showing the INPUT, OUTPUT, EXT MIC jacks, and the power input.

Návod k obsluze

Základní smyčkování

• Záznam: Stiskněte tlačítko SMYČKA footswitch once to start recording your loop. The LED will illuminate red.
• Playback/Overdub: Stiskněte tlačítko SMYČKA footswitch again to stop recording and begin playback. If you press it again during playback, you will start overdubbing.
• Stop: Stiskněte tlačítko ZASTÁVKA footswitch once to stop playback.
• Zpět/Znovu: Stiskněte a podržte ZASTÁVKA footswitch to undo the last overdub. Press and hold again to redo it.
• Vymazat smyčku: Stiskněte a podržte SMYČKA footswitch to clear the current loop.

Loop Level Control

The ÚROVEŇ SMYČKY knob adjusts the overall volume of your recorded loop. Turn clockwise to increase volume, counter-clockwise to decrease.

Record Modes (REC-DUB-PLAY / REC-PLAY-DUB)

The Ditto JAM X2 offers two recording modes, selectable via the small toggle switch:

• REC-DUB-PLAY: In this mode, the first press of the LOOP footswitch records, the second press starts overdubbing, and a third press initiates playback without further overdubbing.
• REC-PLAY-DUB: In this mode, the first press records, the second press starts playback, and a third press initiates overdubbing.

Obrázek: Podrobný view of the toggle switch for selecting between REC-DUB-PLAY and REC-PLAY-DUB modes.

BeatSense Technology

The innovative BeatSense technology uses dual built-in microphones to listen to your band's rhythmic elements (like drums) and automatically synchronize your loops to the detected tempo. This ensures your loops stay perfectly in time with the rest of the band.

Image: A musician's feet operating the Ditto JAM X2 pedal on a stage floor, demonstrating its use in a live setting.

Údržba

• Udržujte pedál čistý a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
• Nevystavujte pedál extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
• Do not attempt to open the unit or perform repairs yourself, as this will void the warranty. Refer to qualified service personnel for any issues.
• Ensure proper ventilation around the pedal during use.

Image: The bottom label of the Ditto JAM X2 pedal, displaying compliance information, manufacturer details, and power requirements.

Odstraňování problémů

Žádný zvukový výstup

• Zkontrolujte všechna kabelová připojení (vstup, výstup, napájení).
• Ensure the pedal is receiving power.
• Verify the LOOP LEVEL knob is not set to minimum.
• Test with different cables and ampzařízení/nástroj k izolaci problému.

Loop Not Synchronizing

• Ensure the BeatSense microphones are not obstructed.
• Verify the external microphone (if used) is properly connected and functioning.
• The BeatSense technology works best with clear, consistent rhythmic input (e.g., drums). Complex or irregular rhythms may affect synchronization accuracy.
• Ensure the pedal is placed in an optimal position to pick up rhythmic sounds from the band.

Footswitches Not Responding

• Zkontrolujte napájení.
• Pokud problém přetrvává, kontaktujte zákaznickou podporu.

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official TC Electronic webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Online zdroje: Navštivte Elektronický obchod TC na Amazonu pro další informace o produktu a zdroje.