Důležité bezpečnostní informace
Read all instructions carefully before using this product. Failure to follow these instructions may result in injury or damage to the device. Keep this manual for future reference.
- Zbraně vždy skladujte nenabité a uzamčené.
- Keep keys and access codes in a secure location, away from children and unauthorized users.
- Do not store the device in areas with extreme temperatures or high humidity.
- Ensure the device is securely mounted if intended for floor mounting.
Obsah balení
- Amazon Basics Dual Firearm Safety Device
- Záložní klíče (2)
- Montážní materiál (šrouby, podložky)
- Uživatelská příručka
Konec produktuview
The Amazon Basics Dual Firearm Safety Device is designed to provide secure storage for firearms, valuables, or documents. It features a programmable electronic keypad for quick access and a traditional key lock for backup entry. The interior is lined with foam to protect contents.
Obrázek 1: Přední strana view of the Amazon Basics Dual Firearm Safety Device, showing the electronic keypad and key lock.
Obrázek 2: Interiér view of the safety device, showing the foam lining and the backup keys inserted into the lock.
Figure 3: Close-up of the electronic keypad, highlighting the numbered buttons and the Amazon Basics logo.
Nastavení
1. Počáteční přístup
Upon first use, access the device using the provided backup keys. Insert one of the keys into the keyhole on the front of the device and turn it to unlock. The door will automatically open.
2. Instalace baterie
The electronic keypad requires batteries (not included). Locate the battery compartment, typically inside the door or on the back panel. Insert the required number and type of batteries (e.g., 4 AA batteries) according to the polarity indicators.
3. Setting Your Personal Access Code
- With the door open, locate the programming button (often a small red or green button) inside the device.
- Press the programming button. The keypad will typically beep or an indicator light will illuminate.
- Enter your desired 4-8 digit access code on the keypad.
- Press the programming button again to confirm. The device should beep or flash to indicate successful programming.
- Před zavřením dveří vyzkoušejte nový kód s otevřenými dveřmi. If the code works, close the door and test it again.
Poznámka: If the code is not accepted, repeat the programming steps. Keep your access code confidential and memorable.
4. Montáž zařízení (volitelné)
The device features pre-drilled holes for floor mounting to enhance security. Use the included hardware to secure the device to a solid surface. Ensure the mounting location is stable and discreet.
Figure 4: The safety device securely placed on a shelf, demonstrating a typical installation scenario.
Návod k obsluze
1. Opening with Electronic Keypad
- Zadejte naprogramovaný přístupový kód na klávesnici.
- The device will beep or an indicator light will confirm the correct code.
- Dveře se automaticky otevřou.
2. Opening with Backup Key
In case of battery failure or forgotten code, use the backup key:
- Insert the backup key into the keyhole.
- Turn the key to unlock the device.
- Dveře se automaticky otevřou.
3. Closing the Device
To close the device, simply push the door firmly until it latches shut. The electronic lock will automatically engage.
Figure 5: The safety device open on a shelf, showing its capacity for storing items like a passport and a small firearm.
Údržba
- Výměna baterie: Replace batteries annually or when the low battery indicator (if present) illuminates. Use only the recommended battery type.
- Čištění: Vnější povrch otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Údržba klíčové dírky: Periodically check the keyhole for obstructions. Do not lubricate the keyhole unless specifically recommended by the manufacturer.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Klávesnice nereaguje. | Vybité nebo vybité baterie. | Replace batteries. Use backup key to open if necessary. |
| Door does not open after entering code. | Incorrect code entered; batteries low; mechanism jammed. | Re-enter code carefully. Replace batteries. Use backup key. Check for obstructions. |
| Cannot program new code. | Incorrect programming sequence; batteries low. | Review "Setting Your Personal Access Code" section and repeat steps. Ensure batteries are fresh. |
| Backup key does not work. | Key is bent or damaged; keyhole obstructed. | Inspect key for damage. Check keyhole for debris. Do not force the key. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | PS75EF |
| Exterior Dimensions (LxWxH) | 11.8 x 9.8 x 3 palce |
| Interior Dimensions (LxWxH) | 11.7 x 7.4 x 2.8 palce |
| Hmotnost | 8.48 liber (3.85 kilogramů) |
| Typ zámku | Electronic Keypad, Key |
| Materiál | 16-gauge Powder-Coated Steel, Plastic |
| Typ montáže | Floor Mount (hardware included) |
| UPC | 852368006497 |
Záruka a podpora
This product is backed by an Amazon Basics 1-year limited warranty.
For warranty claims or technical support, please contact Amazon Basics customer service. Refer to your purchase documentation for specific contact details or visit the official Amazon Basics webmísto.
Online resources may include FAQs and additional troubleshooting guides.
Poznámka: Uschovejte si doklad o koupi pro účely záruky.
