Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.
Bezpečnostní informace
VAROVÁNÍ: Tento produkt vás může vystavit chemikáliím včetně olova, o kterém je ve státě Kalifornie známo, že způsobuje rakovinu a vrozené vady nebo jiné reprodukční poškození. Pro více informací přejděte na www.P65Warnings.ca.gov.
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Sestava vnější páky
- Sestava vnitřní páky
- Adjustable Latch (2-3/8" - 2-3/4" backset)
- Rounded Steel Faceplate
- Úderová deska
- Montážní šrouby
- Návod k použití
Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.
Nastavení a instalace
This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview procesu instalace:
- Připravte dveře: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
- Adjust the Latch: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
- Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
- Install Interior Lever: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
- Instalace protiplechu: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Testovací provoz: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.
Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.
Návod k obsluze
To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.
Údržba
To maintain the finish and functionality of your door lever, follow these guidelines:
- Čištění: Očistěte páku měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
- Mazání: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
- Utahování: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Páka je uvolněná nebo se kymácí. | Upevňovací šrouby jsou uvolněné. | Utáhněte montážní šrouby na vnitřní straně páky. |
| Západka se úplně nezasune. | Mechanism is dirty or dry; improper installation. | Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment. |
| Dveře se správně nezavírají. | Strike plate misalignment; latch bolt not extending fully. | Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | AB-DH504-SN |
| Materiál | Zinc Alloy (body), Steel (internal structure) |
| Dokončit | Saténový nikl |
| Kompatibilita tloušťky dveří | 1-3/8" to 1-3/4" |
| Nastavitelná západka Backset | 2-3/8" (60 mm) nebo 2-3/4" (70 mm) |
| Rozměry produktu | 6.65"D x 4.29"Š |
| Hmotnost položky | 1.43 libry |
| Styl | Passage (non-locking) |
| UPC | 841511121248 |
Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).
Záruka a podpora
For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.
