Zavedení
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Mount-It! Mobile Computer Cart. Designed for versatility and ergonomic comfort, this portable workstation features height adjustability, dual monitor support, and robust mobility, making it suitable for various environments from offices to classrooms.
Mezi klíčové vlastnosti patří:
- Height Adjustable Flexibility: Tabletop height from 37.25" to 55", dual monitor mounts from 54.5" to 72.25".
- Dual Monitor Support: Accommodates two 27" monitors with VESA 75x75mm and 100x100mm compatibility, offering 360-degree rotation, 180-degree swivel, and 80-degree tilt.
- Robust Mobility: Smooth-rolling casters with locking mechanism for easy repositioning and stability.
- Multi-Functional Workspace: Spacious 40" wide tabletop for monitors, keyboard, mouse, PC tower, and printer.
- Convenient Setup: Comes with all necessary hardware and clear instructions for straightforward assembly.
Figure 1: Mount-It! Mobile Computer Cart, fully assembled.
Bezpečnostní informace
Please read and understand all safety warnings before assembly and use. Failure to do so may result in injury or damage to the product.
- Ensure the total weight on the cart does not exceed the maximum recommended weight of 132 pounds.
- If the total weight exceeds 44 pounds, it is recommended to anchor the cart to a wall for additional stability.
- Exercise caution when moving the cart, especially when loaded, to prevent tipping.
- Be aware of potential pinch points during height adjustment. Keep hands clear of moving parts.
- Do not attempt to adjust the height while the desk is heavily loaded or in use without proper support.
Nastavení a montáž
Follow these steps carefully for proper assembly. All necessary hardware is included.
1. Montáž základny
- Turn the base upside down. Attach the casters using the provided wrench. Ensure the locking casters are on the longer end of the base.
- Lock the brakes on the locking casters to keep the desk steady during assembly.
- Turn the base upright. Insert the column base inserts into the oval-shaped holes.
- Attach the left and right columns by inserting them into the base in the orientation shown in the assembly video. Secure them from underneath using the provided bolts.
- Place the base shelf over the horizontal supports on the base and secure it from underneath using the provided bolts. Verify the orientation of the shelf is aligned with the back end of the frame.
Video 1: Height Adjustable Rolling Stand up Desk Assembly (MI-7972B). This video demonstrates the step-by-step assembly process for the desk, including attaching casters, columns, and shelves.
2. Instalace police
- Place the middle shelf bar into the supports so that it bridges the two columns. Secure it through the top of the bar using the provided bolts.
- Attach the top shelf bars to the ends of the columns in the orientation shown in the assembly video and secure them through the top of the bars using the provided bolts.
- Install the middle shelf onto the middle shelf bar using the provided bolts through the bottom of the support.
- Place the keyboard shelf onto the front bars and secure it using the bolts from underneath.
Obrázek 2: Rozložené view of the cart components, including clamp attachment, durable steel frame, height adjustable desktop shelves, utility shelf, utility/CPU shelf, decorative base cover, and locking wheels.
3. Monitor Mount Assembly
- Attach the lower half of the clamp to the upper half using the provided bolt.
- Place the adhesive pads on the inside top and bottom of the clamp assembly to provide grip and prevent scratching of the desk surface.
- Attach the pole to the top of the clamp using the provided bolt.
- Posuňte třamp over the back of the top shelf and tighten it in place using the hand knob.
- Slide the cable clip over the top of the pole and lower it to the middle of the pole.
- Slide the monitor arm assembly over the top of the pole and secure it in place by tightening the bolt on the back of the mount.
- Select the appropriate size mounting bolt for your display's mounting holes. Install the top two bolts and washers to the monitor, leaving a gap of approximately 0.11 inches (3 millimeters).
- Hang the monitor on top of the VESA plate as shown in the video. Install the lower two bolts and washers through the lower holes. Tighten all four bolts until secure, but do not overtighten.
Figure 3: The cart supports two monitors up to 27 inches each, with VESA compatibility (75x75mm, 100x100mm) and a capacity of 17.6 lbs per monitor.
Návod k obsluze
Nastavení výšky
The cart features an adjustable tabletop height and monitor mount height for ergonomic positioning.
- Zvednutí stolu: Remove any loose objects from the desk. Loosen the hand knobs on the back of both columns. Place your foot on the base shelf and lift with two hands, one on each end of the desk. Lift past each click until the desired height is reached. Do not raise past the "Max" marking on the inside column. Tighten the hand knobs back down to secure the height.
- Snížení stolu: Hold the desk in the same way as raising it. Lift it past the "Max" marking on the inside column until it passes the marking for "Down". Do not let go of the desk as the internal latch has been released and the desk may fall. Lower the desk slowly until it reaches the lowest level and you hear a click. Tighten the hand knobs back down.
Figure 4: Turn knobs to adjust height. Pull desktop up or push down to desired height, and rotate knobs back to lock in place. The desk adjusts from a minimum of 37.25 inches to a maximum of 55 inches.
Video 2: Height Adjustable Rolling Stand up Desk Features (MI-7972B). This video highlights the key features of the desk, including its adjustable height and mobility.
Nastavení monitoru
The monitor mounts offer full motion capabilities for optimal viewIng.
- Nastavení sklonu: The viewing angle can be adjusted in the range of +45° to -45°. Loosen the side bolt on the VESA plate, adjust to the desired viewing angle, and then tighten the bolt again to secure.
- Úprava úrovně: Adjust the level of the screens by tightening or loosening the bolt behind the top of the VESA plate to raise or lower the level of the monitors.
- Rotation and Swivel: The screens can be rotated 360 degrees, and each joint can swivel 180 degrees into alternate viewing úhly.
Figure 5: Monitor arm allows for 360° rotation, 180° swivel, and +/- 80° tilt for customized viewIng.
Správa kabelů
Run any cables through the cable management clips on the arms and center pole to keep your workspace tidy. Store the hex wrenches on the back of the cable clip for future use.
Údržba
Regular maintenance ensures the longevity and optimal performance of your mobile computer cart.
- Čištění: Otřete všechny povrchy měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
- Péče o kolečka: Periodically check the casters for any debris (hair, lint) that may impede smooth rolling. Clean as necessary. Ensure locking mechanisms are functioning correctly.
- Kontrola upevňovacích prvků: Over time, bolts and screws may loosen. Periodically check all fasteners, especially those on the shelves and monitor mounts, and tighten them if necessary to maintain stability.
- Mechanismus nastavení výšky: Keep the adjustable columns free of dust and obstructions. If the mechanism feels stiff, a small amount of silicone-based lubricant can be applied, but avoid oil-based lubricants.
Odstraňování problémů
If you encounter issues with your Mount-It! Mobile Computer Cart, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stůl je nestabilní nebo se kymácí. | Uvolněné upevňovací prvky; nerovná podlaha; nezajištěná kolečka. | Check and tighten all assembly bolts. Ensure all locking casters are engaged. Adjust individual caster height if the floor is uneven. |
| Difficulty adjusting desk height. | Hand knobs not fully loosened; excessive weight on desk; internal mechanism obstruction. | Ensure hand knobs are completely loosened. Remove heavy items before adjusting. Check for any obstructions in the columns. Apply silicone lubricant if mechanism is stiff. |
| Casters do not roll smoothly or lock properly. | Debris in casters; damaged casters; metal frame bending. | Clean any debris from the caster wheels. If casters are damaged or the frame is bending, contact customer support for replacement parts. |
| Monitors are not level or tilt unexpectedly. | Loose tilt or level adjustment bolts. | Tighten the tilt adjustment bolt on the VESA plate. Adjust the level bolt behind the VESA plate as described in the Operating Instructions. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Mount-It! |
| Číslo modelu | MI-7972 |
| Rozměry produktu (D x Š x V) | 26"H x 39.5"Š x 72.25"V |
| Barva | Silver (or Black/Grey depending on variant) |
| Základní materiál | Umělé dřevo |
| Typ horního materiálu | Umělé dřevo |
| Doporučená maximální hmotnost | 132 liber (celkem) |
| Kompatibilita monitoru | Up to two 27" screens |
| Kompatibilita VESA | 75x75mm, 100x100mm |
| Tabletop Height Adjustment | 37.25" až 55" |
| Monitor Mount Height Adjustment | 54.5" až 72.25" |
| Monitor Tilt Angle | +/- 80 stupňů |
| Otočný monitor | 180 stupňů |
| Monitor rotace | 360 stupňů |
| Zahrnuté komponenty | Mobile Standing Desk with Dual Monitor Mount |
Figure 6: Detailed dimensions and weight capacities. Each shelf has a 33 lb capacity, with a total capacity of 132 lbs.
Záruka a podpora
Mount-It! products typically come with a limited warranty. For specific warranty details and to register your product, please visit the official Mount-It! webwebu nebo se podívejte na záruční list dodaný s vaším nákupem.
For customer support, technical assistance, or to inquire about replacement parts, please contact Mount-It! directly. You can find contact information on their official webwebu nebo prostřednictvím vaší nákupní platformy.
- Výrobce: Mount-It!
- prodejce: Mount-It!
- Plány ochrany: Available for 2-Year and 3-Year durations, as well as a monthly "Complete Protect" plan.
- Vrácení: 30-day easy returns policy.
