Uživatelská příručka k dronu Sky Viper Dash Nano

Zavedení

The Sky Viper Dash Nano drone is engineered for simplified flying and superior performance within its class. Designed for both casual flyers and beginners, it incorporates flight technology typically found in racing drones, allowing it to reach speeds up to 25 mph. Its flight assist features make controlling the drone effortless, enabling single-stick directional flight and easy hover maintenance. This drone is perfectly suited and safe for fast indoor flying.

Image: The Sky Viper Dash Nano Drone shown with its compact remote controller.

Co je zahrnuto

Your Sky Viper Dash Nano Drone package includes the following items:

• Sky Viper Dash Nano Drone
• 3.7V 100mAh Lithium Polymer Battery (pre-installed)
• Dálkový ovladač
• One (1) Set of Extra Blade Guards
• USB nabíjecí kabel
• Návod k použití (tento dokument)

Image: All components included in the Sky Viper Dash Nano Drone package, including the drone, extra propellers, and USB charging cable.

Nastavení

1. Instalace baterie do ovladače

Dálkový ovladač vyžaduje 3 baterie AAA (nejsou součástí balení). Instalace:

1. Vyhledejte přihrádku na baterie na zadní straně ovladače.
2. Odšroubujte kryt bateriového prostoru a sejměte jej.
3. Vložte 3 baterie typu AAA a dbejte na správnou polaritu (+/-).
4. Nasaďte kryt a zajistěte jej šroubem.

2. Drone Charging

The drone comes with a built-in 3.7V 100mAh lithium polymer battery. Charge the drone before first use.

1. Connect the small end of the USB charging cable to the charging port on the drone (usually located on the underside).
2. Connect the larger USB end of the cable to a powered USB port (e.g., computer, USB wall adapter).
3. The indicator light on the USB cable will show charging status (refer to specific light behavior in the original manual if available, typically red for charging, off/green for full).
4. Charging typically takes approximately 30-45 minutes for a full charge.

Návod k obsluze

1. Zapněte a spárujte

1. Ensure the drone is fully charged.
2. Turn on the drone by sliding the power switch (located on the underside of the drone). The drone's lights will begin to flash.
3. Turn on the remote controller by pressing the power button. The controller's indicator light will flash.
4. To pair, push the left joystick (throttle) all the way up, then all the way down. The drone and controller lights will become solid, indicating successful pairing.

2. Letové režimy

The Dash Nano Drone offers dual flight modes to suit different skill levels:

• Normální režim: Ideal for beginners, offering stable and forgiving control.
• Sportovní režim: For experienced pilots, providing increased responsiveness and agility for faster, more aggressive flying.

Switch between modes using the "Normal" and "Sport" buttons on the controller.

Image: The remote controller highlighting the "Normal" and "Sport" buttons for selecting flight modes.

3. Auto Launch & Auto Land

These features simplify takeoff and landing:

• Automatické spuštění: Press the "Launch" button on the controller to automatically take off and hover at a stable altitude.
• Automatické přistání: Press the "Land" button to initiate a gentle, controlled descent and landing.

Image: The Sky Viper Dash Nano Drone performing an auto-launch, lifting off smoothly from a flat surface.

4. One-Touch Stunts

Perform impressive aerial maneuvers with ease:

• The drone is capable of performing 8 different one-touch stunts, including 360-degree flips.
• To activate a stunt, hold down the "Stunt" button (usually located on the top shoulder of the controller) and then tap the right joystick in the desired direction for the flip or roll.

Image: A child observing the Sky Viper Dash Nano Drone as it executes a 360-degree flip indoors.

Údržba

1. Péče o vrtuli

The drone's propellers are designed to be flexible and durable. However, in case of damage:

• Inspect propellers regularly for cracks or bends.
• If a propeller is damaged, carefully remove it and replace it with one of the included extra blades. Ensure the correct propeller (A or B) is placed on the corresponding motor.
• Keep propellers free from hair, dust, and debris to ensure optimal flight performance.

2. Péče o baterie

• Vždy používejte dodaný nabíjecí kabel USB.
• Do not overcharge the drone's battery. Disconnect once fully charged.
• Store the drone and controller in a cool, dry place when not in use.

Odstraňování problémů

• Drone not responding/pairing: Ensure both drone and controller are fully charged. Turn both off, then on again, and re-attempt the pairing sequence (throttle up then down).
• Nestabilní let/driftování: Perform a calibration. Refer to the original manual for specific calibration steps, which usually involve holding both joysticks in a specific position. Check for damaged propellers and replace if necessary.
• Krátká doba letu: Ensure the battery is fully charged. Battery performance may decrease over time with repeated use.
• Vrtule se neotáčejí: Check for any obstructions (hair, debris) around the motors or propellers. Ensure the drone is powered on and paired correctly.

Specifikace

Podpora

For further assistance or detailed instructions, please refer to the official user guide:

Stáhnout oficiální uživatelskou příručku (PDF)