Zavedení
This instruction manual provides comprehensive guidance for the setup, operation, maintenance, and troubleshooting of your Versa Automatic Single Watch Winder with Sliding Cover. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Versa watch winder is designed to keep your automatic watch wound and ready to wear, preventing the need for manual winding and time setting when not in use. It features a direct-drive motor, multiple rotation settings, and a protective sliding cover.
Vlastnosti produktu
- Motor s přímým pohonem: Equipped with a newly designed, longer-lasting direct-drive motor specifically engineered for watch winders.
- Uživatelsky přívětivé ovládání: Features front-facing controls with a dedicated power button for easy access.
- Adjustable Turns Per Day (TPD): Offers 4 TPD settings: 650, 850, 1050, and 1250.
- Multiple Rotation Directions: Provides 3 direction settings: clockwise, counter-clockwise, and bi-directional.
- 12 Setting Combinations: A total of 12 different combinations of TPD and direction settings are available to suit various watch requirements.
- Removable Spring Action Watch Pillow: Designed to securely hold your watch.
- Zero Magnetization: Engineered to prevent magnetization, ensuring no harm to your automatic watches.
- Posuvný kryt: A protective sliding cover shields your watch from dust and environmental elements.
- Napájecí adaptér: Includes a 100-240V power adapter.
- Navrženo v USA: All Versa watch winders are designed in the USA.
Poznámka: This watch winder is not compatible with Seiko Kinetic Watches due to differences in their winding mechanisms compared to traditional automatic watches.
Nastavení
- Unpack the Winder: Carefully remove the watch winder and all accessories from its packaging. Ensure all components, including the power adapter and watch pillow, are present.
- Prepare the Watch Pillow:
The watch pillow is designed with a spring action to accommodate various watch sizes. For smaller wristbands (6 - 7.25 inches), use the pillow without the large adapter. For larger wristbands (6.75 - 8 inches) and oversized watches, attach the included large adapter to the pillow.
Image: Adjustable watch pillow demonstrating fit for different wrist sizes (6-7.25 inches without adapter, 6.75-8 inches with adapter).
- Place Your Watch: Gently secure your automatic watch onto the prepared watch pillow. Ensure the watch is snug but not overly tight, allowing for free rotation.
- Insert Watch Pillow: Place the watch pillow with the secured watch into the winder's compartment.
- Připojte napájení: Plug the provided power adapter into the DC input port located at the back of the watch winder. Then, plug the adapter into a standard electrical outlet (100-240V).
Obrázek: Přední strana view of the Versa Automatic Single Watch Winder with its transparent sliding cover closed, showcasing the watch compartment and front controls.
Obrázek: Boční view of the Versa Automatic Single Watch Winder, highlighting the sleek design and the location of the power input port at the rear.
Návod k obsluze
The Versa watch winder features front-facing controls for power, rotation direction, and Turns Per Day (TPD) settings.
Konec ovládacího paneluview
The control panel typically consists of:
- Tlačítko zapnutí/vypnutí: Activates or deactivates the winder.
- Volič směru: Cycles through clockwise (CW), counter-clockwise (CCW), and bi-directional (CW+CCW) rotation modes.
- TPD Selector: Cycles through the available Turns Per Day settings (650, 850, 1050, 1250).
Setting the Winder
- Zapnutí: Press the On/Off button to turn on the watch winder. An indicator light will illuminate.
- Vyberte směr otáčení: Press the Direction Selector button to choose the desired rotation mode for your watch. Consult your watch's manufacturer specifications for the recommended winding direction.
- Clockwise (CW): Rotates only in a clockwise direction.
- Counter-Clockwise (CCW): Rotates only in a counter-clockwise direction.
- Bi-directional (CW+CCW): Rotates in both clockwise and counter-clockwise directions.
- Select TPD Setting: Press the TPD Selector button to choose the appropriate Turns Per Day setting. Refer to your watch's manufacturer guidelines for the optimal TPD.
- 650 TPD
- 850 TPD
- 1050 TPD
- 1250 TPD
- Pracovní cyklus: The watch winder is programmed to operate in cycles to prevent overwinding. It will typically turn for approximately 5 minutes, then rest for a period that varies depending on the selected TPD setting. This cycle will repeat continuously as long as the winder is powered on. The winder is designed not to turn continuously.
Once the settings are configured, the winder will begin its operation cycle, keeping your watch wound.
Údržba
- Čištění: K čištění vnější strany natahovače hodinek použijte měkký, suchý hadřík. V případě odolných skvrn použijte lehceamp Lze použít hadřík a ihned osušit. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Watch Pillow Care: The watch pillow can be wiped clean with a soft, damp cloth. Ensure it is completely dry before placing a watch on it.
- Ochrana proti prachu: Always keep the sliding cover closed when the winder is not in use or when a watch is being wound to protect it from dust and debris.
- Umístění: Place the winder on a stable, level surface away from direct sunlight, extreme temperatures, and high humidity.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Winder is not turning. |
|
|
| Watch is not winding. |
|
|
| Unusual noise from the winder. |
|
|
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please refer to the Warranty and Support section for assistance.
Specifikace
- Čísla modelů: G084, 5566227945
- Rozměry (přibližné): 10.39 x 7.13 x 6.65 palce
- Hmotnost (přibližná): 2.29 libry
- Příkon: 100-240V (AC adapter included)
- Turns Per Day (TPD) Settings: 650, 850, 1050, 1250
- Rotation Directions: Clockwise, Counter-Clockwise, Bi-directional
- Watch Pillow Compatibility: Adjustable for wrist sizes 6 - 8 inches
- Výrobce: Versa
Záruka a podpora
The Versa Automatic Single Watch Winder is covered by a 1-letá záruka od data nákupu.
This warranty covers manufacturing defects and ensures the product functions as intended under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
For warranty claims, technical support, or any inquiries regarding your product, please contact Versa customer service. Keep your proof of purchase for warranty validation.
Customer service is a priority, and the manufacturer is committed to addressing any issues you may encounter with your product.
