Univerzální helma Sena Clamp Návod k obsluze sady pro Harley-Davidson CB/Audio (20S, 20S EVO, 30K)

1. Úvod

This manual provides instructions for the Sena Universal Helmet Clamp Kit, model SC-A0316, designed for use with Harley-Davidson CB/Audio systems. This kit is compatible with Sena 20S, 20S EVO, and 30K communication systems, enabling wired audio and CB functionality within your helmet.

Obrázek 1.1: Konecview of the Sena Universal Helmet Clamp Kit, showing the main clamp unit, speakers, microphones, and various cables and mounting accessories.

2. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Harley CB Audio Clamp
• Clamp Krycí adaptér
• Boom mikrofon
• Drátový boom mikrofon
• Dynamické reproduktory
• Hook and Loop Fastener for Boom Microphone
• Mikrofonní houba
• Pěnové kryty reproduktorů
• Suché zipy pro reproduktory
• Lepený adaptér pro povrchovou montáž
• Imbusový klíč
• Speaker Port Cap
• Podložky pod reproduktory
• Gumové podložky
• Boom držák mikrofonu
• Hook and Loop Fastener for Holder
• Installing Foam Speaker Cover Sheet
• 7-DIN Harley Cable

3. Nastavení a instalace

This section details the installation of the clamp kit components into your helmet.

3.1. Připevnění Clamp Jednotka

Clamp unit secures the main module to your helmet. Choose between the clamp type or the glued surface mounting adapter based on your helmet's design and preference.

1. Clamp Instalace: Povolte šrouby na třamp unit using the provided Allen wrench. Slide the clamp between the helmet shell and the inner padding, ensuring a secure fit. Tighten the screws.
2. Glued Surface Mounting: Clean the desired mounting area on the helmet surface thoroughly. Peel the backing from the glued surface mounting adapter and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the main unit.

Image 3.1: The main clamp unit, which attaches to the side of the helmet.

3.2. Instalace reproduktoru

Position the speakers inside your helmet's ear pockets for optimal audio clarity.

1. Identifikujte levý a pravý reproduktor.
2. Attach the hook and loop fasteners for speakers to the back of each speaker.
3. Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for the best sound experience. Use speaker pads or rubber pads if needed for proper fit and comfort.
4. Kabely reproduktoru úhledně veďte pod polstrováním helmy k clamp jednotka.

Image 3.2: The dynamic speakers with their wiring, designed to fit inside helmet ear pockets.

3.3. Instalace mikrofonu

Choose between the boom microphone for open-face helmets or the wired boom microphone for full-face helmets.

1. Výložníkový mikrofon: Attach the boom microphone holder to the inside of the helmet near your mouth using the hook and loop fastener. Insert the boom microphone into the holder. Apply a microphone sponge for wind noise reduction.
2. Drátový mikrofon s ramenem: For full-face helmets, route the wired boom microphone along the helmet's chin bar. Secure it with hook and loop fasteners so the microphone is positioned directly in front of your mouth. Apply a microphone sponge.
3. Connect the chosen microphone to the appropriate port on the clamp jednotka.

Image 3.3: The wired boom microphone, suitable for full-face helmets.

3.4. Connecting to Harley-Davidson CB/Audio

Use the provided 7-DIN Harley cable to connect the clamp unit to your motorcycle's CB/Audio system.

1. Locate the 7-DIN port on your Harley-Davidson motorcycle.
2. Connect one end of the 7-DIN Harley cable to the clamp jednotka.
3. Connect the other end of the cable to the motorcycle's 7-DIN port.

4. Návod k obsluze

Tento clamp kit facilitates the use of your Sena communication system (20S, 20S EVO, 30K) with your Harley-Davidson's integrated CB and audio system. The operation of the connected Sena unit itself is covered in its respective user manual.

4.1. Audio Functionality

Once connected, audio from your Harley-Davidson's system (e.g., radio, intercom, navigation) will be routed through the helmet speakers. Adjust volume via your motorcycle's controls or the connected Sena unit.

4.2. CB Functionality

The microphone in your helmet will transmit through the motorcycle's CB system. Use your motorcycle's CB controls to manage transmission and reception.

4.3. Intercom (Motorcycle System)

If your Harley-Davidson has an integrated intercom system, this kit allows you to use your helmet's microphone and speakers for communication with a passenger or other connected riders through the motorcycle's system.

5. Údržba a péče

• Čištění: Otřete clamp unit and cables with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo rozpouštědla.
• Houbičky na mikrofon: Replace microphone sponges periodically to maintain optimal sound quality and hygiene.
• Kontrola kabelů: Pravidelně kontrolujte všechny kabely, zda nevykazují známky opotřebení, roztřepení nebo poškození. Poškozené kabely ihned vyměňte.
• Skladování: Store the kit in a dry, cool place when not in use.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

Sena products are manufactured with high-quality materials and craftsmanship. This product is covered by a manufacturer's warranty. For specific warranty details and duration, please refer to the warranty information provided with your original Sena communication system or visit the official Sena webmísto.

Dostupnost náhradních dílů v EU: Spare parts for this product are available for a duration of 2 years from the date of purchase within the EU.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Sena Customer Service through their official webmístě nebo autorizovaným distributorům.

Online zdroje: For the latest firmware updates, detailed user guides, and support FAQs, please visit the Sena webmísto.