CONTEC 08A Fully Automatic Digital Upper Arm Blood Pressure Monitor

1. Úvod

The CONTEC 08A is a fully automatic digital blood pressure monitor designed for accurate and convenient measurement of blood pressure and pulse rate. This device is suitable for use with adults, children, and neonates, offering multiple measurement modes and cuff sizes to accommodate various users. It features an intuitive interface, data storage capabilities, and essential alarm functions to assist in monitoring health.

Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

2. Bezpečnostní informace

• Do not use this device for purposes other than blood pressure measurement.
• Consult a healthcare professional for interpretation of blood pressure readings. Self-diagnosis and treatment based on measurements can be dangerous.
• Uchovávejte zařízení mimo dosah kojenců a dětí.
• Nevystavujte zařízení extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
• Avoid strong electromagnetic fields, such as those from mobile phones or microwave ovens, near the device during operation.
• If the device displays an error message, refer to the troubleshooting section or contact customer support.

3. Obsah balení

Po otevření balení zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené:

• CONTEC 08A Blood Pressure Monitor Unit
• Manžeta na ruce pro dospělé
• Child Arm Cuff
• Pediatric Arm Cuff
• Datová linka USB
• Uživatelská příručka

Obrázek 3.1: Nadview of the CONTEC 08A package contents, showing the main unit, three different sized cuffs (infant, child, adult), a USB data cable, and the user manual.

4. Konec produktuview

4.1 Klíčové vlastnosti

• Fully automatic blood pressure measurement.
• Storage for three users, with up to 100 measurements per user.
• Three measurement modes: Adult, Pediatric, and Neonatal.
• High-definition color display for clear data viewIng.
• Physiological alarm function with settable limits.
• Low power prompt and settable prompt sound.
• Automatic error message display for measurement issues.
• Option to display units in mmHg or kPa.

Obrázek 4.1: Visual representation of the CONTEC 08A's main features, highlighting its user-friendly design and advanced capabilities.

4.2 Součásti a ovládací prvky zařízení

Obrázek 4.2: Přední a boční view of the CONTEC 08A monitor with labels indicating the display screen, control buttons, and connection ports.

• Zobrazit: Shows blood pressure readings (SYS, DIA, PR), time, date, user mode, and battery status.
• Tlačítko ON/OFF: Zapne nebo vypne zařízení.
• Tlačítko START/STOP: Initiates or stops a blood pressure measurement.
• Tlačítko MENU: Přístup k nastavení a možnostem zařízení.
• USER SWITCH Button: Toggles between User 1, User 2, and User 3.
• Tlačítko PAMĚŤ: Enters the memory review režim do view past measurements.
• UP/DOWN Button: Navigates through menu options or memory records.
• AC Adapter Jack: Port for connecting an optional AC power adapter (not included).
• USB Plug Jack: Port for connecting the USB data line to a computer for data transfer (software download required).

5. Nastavení

5.1 Napájení zařízení

The CONTEC 08A is battery-powered. Insert four AA batteries into the battery compartment located on the back of the device, ensuring correct polarity. Alternatively, an optional 6V DC power adapter can be used via the AC Adapter Jack.

5.2 Připojení manžety

Select the appropriate cuff size (Adult, Child, or Pediatric) based on the arm circumference of the user. Connect the cuff's air tube securely to the air jack on the side of the monitor.

Obrázek 5.1: The CONTEC 08A monitor with a cuff attached, illustrating the readiness for measurement.

5.3 Cuff Size Guidelines

Using the correct cuff size is crucial for accurate measurements. Refer to the table below for recommended limb circumference ranges for each cuff type:

Obrázek 5.2: Cuff size chart for accurate selection based on arm circumference.

6. Návod k obsluze

6.1 Příprava na měření

For accurate readings, ensure the user is in a quiet and relaxed state:

• Adopt a comfortable sitting position, using back and arms to support the body.
• Place the elbow on a table, with the palm facing up, and the body relaxed.
• Ensure the cuff is level with the heart.
• Keep feet flat on the floor and do not cross legs.

Obrázek 6.1: Proper body and arm positioning for an accurate blood pressure reading.

6.2 Provedení měření

1. Stiskněte tlačítko ON/OFF tlačítko pro zapnutí zařízení.
2. Použijte UŽIVATELSKÝ PŘEPÍNAČ tlačítko pro výběr požadovaného uživatelského profesionálafile (User 1, User 2, or User 3).
3. Ensure the correct cuff is applied snugly to the upper arm, approximately 2-3 cm above the elbow joint, with the air tube running down the center of the arm.
4. Stiskněte tlačítko START/STOP Stiskněte tlačítko pro zahájení měření. Manžeta se automaticky nafoukne.
5. Remain still and quiet during the measurement. The device will automatically deflate the cuff and display the Systolic (SYS), Diastolic (DIA), and Pulse Rate (PR) readings.
6. The measurement will be automatically stored under the selected user profile.

6.3 Selecting Measurement Mode (Adult, Pediatric, Neonatal)

The device supports three measurement modes. To switch modes:

1. Se zapnutým zařízením stiskněte tlačítko MENU tlačítko.
2. Navigate through the menu options using the NAHORU/DOLŮ buttons until 'Mode' or a similar setting is highlighted.
3. Stiskněte MENU again to select the option, then use NAHORU/DOLŮ to choose between 'Adult', 'Pediatric', or 'Neonatal'.
4. Svůj výběr potvrďte stisknutím MENU or START/STOP (refer to on-screen prompts).

7. Správa dat

7.1 Reviewing Stored Data

The monitor stores up to 100 measurements for each of the three users. To review minulé čtení:

1. Ujistěte se, že je zařízení zapnuté.
2. Stiskněte tlačítko PAMĚŤ tlačítko.
3. Použijte NAHORU/DOLŮ buttons to scroll through the stored measurements. Data can be viewed in 'data list', 'trend graph', or 'big font' interfaces for clarity.
4. Stiskněte EXIT or ON/OFF to return to the main screen or power off.

7.2 Physiological Alarm Function

The device features a physiological alarm that can be set to alert users when blood pressure readings exceed or fall below predefined limits. To set or adjust alarm limits:

1. Stiskněte tlačítko MENU button to enter settings.
2. Navigate to the 'Alarm' or 'Limits' setting using the NAHORU/DOLŮ tlačítka.
3. Select the option and adjust the high and low blood pressure limits as desired.
4. Ensure the alarm switch is set to 'ON' if you wish to activate this feature.

7.3 Software Download Steps

To transfer data to a computer, you may need to download specific software. Follow these general steps:

1. Enter the download address into your browser's address bar: http://download.contecmed.com
2. Enter the index code "06SFB031" then click download. (Note: The index code does not allow spaces).
3. A RAR file (e.g., 06SFB031.rar) will be downloaded.
4. Toto rozbalte file and install the executable (e.g., BPMeter_V4.1.0_Setup.exe).

Obrázek 7.1: Step-by-step guide for downloading and installing the CONTEC 08A data management software.

8. Údržba

8.1 Čištění

Clean the monitor and cuff regularly to ensure hygiene and proper function:

• Wipe the monitor's surface with a soft, dry cloth. If necessary, use a cloth lightly dampOmyjte vodou nebo jemným dezinfekčním prostředkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte zařízení do vody.
• Clean the cuff with a soft, damp cloth. Do not wash the cuff in a washing machine or immerse it in water.
• Před uskladněním nebo dalším použitím se ujistěte, že je zařízení zcela suché.

8.2 Skladování

Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

8.3 Výměna baterie

When the screen displays a low power prompt or the device gives a low power sound, replace all four AA batteries with new ones. Ensure correct polarity when inserting new batteries.

9. Řešení problémů

If you encounter issues with your CONTEC 08A monitor, refer to the table below for common problems and their solutions:

10. Specifikace

• Název modelu: CONTEC 08A
• Číslo modelu položky: CONTEC08A-3 Cuffs
• Značka: CONTEC
• Výrobce: Contec Medical Systems Co.ltd
• Zdroj napájení: Battery Powered (4x AA batteries) or optional 6V DC adapter
• Zahrnuté komponenty: Monitor, Adult Cuff, Child Cuff, Pediatric Cuff, USB Data Line, User Manual
• Rozměry balení: 6.42 x 4.8 x 4.76 palce
• Hmotnost: 1.48 libry
• UPC: 733430164683
• Režimy měření: Adult, Pediatric, Neonatal
• Úložiště dat: 3 users, 100 measurements per user

11. Záruka a podpora

For warranty information or technical support, please contact Contec Medical Systems Co.ltd directly or refer to the contact details provided on the product packaging or official webUschovejte si účtenku jako doklad o koupi pro případ reklamace.