1. Úvod
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Metabo SA 312 Automatic Hose Reel. Please read this manual thoroughly before using the product to ensure proper function and to prevent injury or damage.
The Metabo SA 312 is an automatic hose reel designed for professional use, featuring a durable metal casing and a 12-meter high-flexible PU hose. It includes universal 1/4 inch quick connection couplings compatible with Euro, ARO, and ISO standards, and an automatic lock and roll-up function for convenience.
Figure 1: Metabo SA 312 Automatic Hose Reel, showing the black metal casing and blue PU hose with connectors.
2. Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní opatření, abyste snížili riziko zranění nebo poškození.
- Přečtěte si manuál: Před použitím se seznamte se všemi pokyny a varováními.
- Osobní ochranné prostředky: Always wear appropriate eye protection, hearing protection, and other personal protective equipment as required by your work environment.
- Tlak vzduchu: Ensure the air supply pressure does not exceed the maximum recommended pressure for the hose reel and connected tools.
- Bezpečná montáž: The hose reel must be securely mounted to a stable surface (wall or ceiling) using appropriate fasteners.
- Kontrola hadice: Regularly inspect the hose for cuts, abrasions, bulges, or other damage. Replace damaged hoses immediately.
- Integrita připojení: Ensure all connections (hose to reel, hose to tool, air supply to reel) are tight and leak-free before operating.
- Retraction Safety: When retracting the hose, guide it manually to prevent uncontrolled whipping, which can cause injury or damage. Do not release the hose abruptly.
- Děti a přihlížející: Během provozu udržujte děti a kolemjdoucí mimo pracovní oblast.
- Údržba: Perform maintenance only when the air supply is disconnected and the hose is depressurized.
3. Obsah balení
Při vybalování ověřte, zda jsou všechny položky přítomny a nepoškozené.
- Metabo SA 312 Automatic Hose Reel with 12m PU Hose
- Integrated 1/4 inch universal quick connection coupling and plug nipple
- Wall and ceiling mounting brackets (pre-attached or included)
- Návod k použití (tento dokument)
4. Nastavení a instalace
Proper installation is crucial for the safe and effective operation of the hose reel.
4.1 Výběr místa montáže
Select a sturdy wall or ceiling location capable of supporting the weight of the hose reel and the forces exerted during hose extension and retraction. Ensure the location allows for full hose extension without obstruction and provides easy access to the air supply.
4.2 Mounting the Hose Reel
- Position the hose reel against the chosen mounting surface.
- Mark the locations for the mounting holes using the integrated brackets as a template.
- Drill appropriate pilot holes for your chosen fasteners (screws, bolts, anchors – not included).
- Securely attach the hose reel to the wall or ceiling using suitable hardware. Ensure all fasteners are tightened to prevent movement.
Obrázek 2: Strana view of the hose reel, highlighting the robust mounting bracket for secure installation.
Obrázek 3: Shora dolů view illustrating the mounting points on the hose reel for wall or ceiling attachment.
4.3 Připojení k přívodu vzduchu
Connect your compressed air supply line to the inlet fitting on the hose reel. Ensure a tight, leak-free connection. It is recommended to use thread sealant tape for optimal sealing.
5. Návod k obsluze
5.1 Extending the Hose
Grasp the hose firmly and pull it out to the desired length. The automatic locking mechanism will engage at various intervals, holding the hose in place. You will hear a click as it locks.
5.2 Připojení pneumatického nářadí
The Metabo SA 312 is equipped with a 1/4 inch universal quick connection coupling. To connect an air tool, insert the tool's plug nipple into the coupling until it clicks securely into place.
Obrázek 4: Detailní view of the 1/4 inch quick connection coupling and plug nipple, ready for tool attachment.
5.3 Retracting the Hose
To retract the hose, pull it out slightly further until the locking mechanism disengages. Then, slowly guide the hose back into the reel. Do not release the hose abruptly, as this can cause it to whip and potentially cause injury or damage.
5.4 Disconnecting Air Tools
To disconnect an air tool, pull back the collar on the quick connection coupling and remove the tool's plug nipple. Ensure the air supply to the tool is off before disconnecting.
6. Údržba
Regular maintenance ensures the longevity and safe operation of your Metabo SA 312 hose reel.
- Kontrola hadice: Periodically inspect the entire length of the PU hose for any signs of wear, cuts, kinks, or damage. Replace the hose if any damage is found.
- Kontroly připojení: Ensure all air connections are tight and free of leaks. Apply thread sealant as needed.
- Čištění: Keep the hose reel casing and hose clean from dirt, dust, and debris. Use a damp hadřík k čištění; vyhněte se agresivním chemikáliím.
- Zabezpečení montáže: Regularly check the mounting bolts or screws to ensure they remain tight and secure.
- Mazání: The internal retraction mechanism is generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by Metabo service personnel.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Hose does not retract fully. | Hose is kinked or obstructed. Spring mechanism is weak or damaged. | Check for kinks or obstructions along the hose path. Ensure the hose is clean. If the spring is damaged, contact Metabo service. |
| Hose does not lock in place. | Zamykací mechanismus je znečištěný nebo poškozený. | Clean the locking mechanism area. If damaged, contact Metabo service. |
| Air leaks from connections. | Loose connections, worn seals, or damaged hose/fittings. | Tighten all connections. Inspect O-rings and seals; replace if worn. Check hose and fittings for damage. |
| Snížený průtok vzduchu. | Kinked hose, clogged filter (if applicable), or insufficient air supply. | Check the hose for kinks. Ensure your air compressor is providing adequate pressure and flow. |
8. Specifikace
Technical data for the Metabo SA 312 Automatic Hose Reel.
| Značka | Metabo |
| Číslo modelu | 628824000 |
| Název produktu | SA 312 Automatic Hose Reel |
| Materiál | Kov Casing |
| Typ hadice | High-flexible PU Hose |
| Délka hadice | 12 metrů |
| Vnitřní průměr hadice | 8 mm (přibližně 1/4 palce) |
| Typ připojení | 1/4 inch Universal Quick Connection (Euro, ARO, ISO compatible) |
| Provozní režim | Automatic (lock and roll-up) |
| Typ instalace | Držák na stěnu, držák na strop |
| Hmotnost položky | 8 kg (17.6 lb) |
| Barva | Multi-coloured (primarily black casing with blue hose) |
9. Záruka a podpora
Metabo products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Metabo webPodrobné záruční podmínky platné pro váš region naleznete na webových stránkách.
For technical support, spare parts, or service inquiries, please contact your local authorized Metabo dealer or Metabo customer service.
Doba dostupnosti náhradních dílů v EU: 2 roky
